
GalaxyModPCB
dimitrivlachos/Galaxy-Light-Projector-Mod
Modification of a consumer night-light projector, converting it into a smart device with a custom PCB, powered by an ESP-32.

My custom FPGA for a project box I have been using
Midi FPGA PCB is an open-source printed circuit board by dimitrivlachos, from the dimitrivlachos/Midi-FPGA repository on GitHub. It is a 4-layer board of 45 × 80 mm with 24 parts on 81 nets.
It is built around the ESP32-WROOM-32, AP7361EA-33E and DMP2123L. Its parts include 11 capacitors, 3 ICs, 2 resistors, 1 diode and 1 transistor. It belongs with the fPGA and programmable logic and audio and music boards and the ESP32 and FPGA and CPLD boards of this library.
My custom FPGA for a project box I have been using
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C5, C6, C9, C11 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C10 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8 |
| 1 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | JP1 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 150 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | AP7361EA | Midi-FPGA-lib:SOT-223-3R | U2 |
| 1 | CP2102N-Axx-xQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U3 |
| 1 | DMP2123L | Package_TO_SOT_SMD:SOT-23-3 | Q1 |
| 1 | ESP32-WROOM-32 | Midi-FPGA-lib:ESP32-WROOM-32 | U1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | USB4110GFA | USB4110_GF_A:GCT_USB4110GFA | J1 |

dimitrivlachos/Galaxy-Light-Projector-Mod
Modification of a consumer night-light projector, converting it into a smart device with a custom PCB, powered by an ESP-32.


asterics/esp32_mouse_keyboard
ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)


Bellafaire/ESP32-Smart-Watch
An open source smartwatch based on the ESP32 compatible with the Arduino IDE.



It measures 45 × 80 mm and has 4 copper layers, 1.6 mm thick.
24 parts, built around the ESP32-WROOM-32, AP7361EA-33E and DMP2123L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dimitrivlachos/Midi-FPGA repository on GitHub, at the commit this page was made from: the board is Midi-FPGA-PCB/Midi-FPGA-PCB.kicad_pcb and its schematic Midi-FPGA-PCB/Midi-FPGA-PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask dimitrivlachos before reusing the design.