

GalaxyModPCB
Modification of a consumer night-light projector, converting it into a smart device with a custom PCB, powered by an ESP-32.
- Size
- 63.5 × 38.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 59
- Pads
- 168
- Tracks, vias
- 278, 97
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Jul 2023
- Updated
- 29 Sep 2023
Overview
GalaxyModPCB is an open-source printed circuit board by dimitrivlachos, from the dimitrivlachos/Galaxy-Light-Projector-Mod repository on GitHub, published under the MIT licence. It is a 4-layer board of 63.5 × 38.2 mm with 57 parts on 59 nets, routed with 278 tracks and 97 vias.
It is built around the ESP32-WROOM-32, AP7361EA-33E and DMP2123L-7-VB. Its parts include 21 resistors, 8 capacitors, 7 transistors, 7 connectors and 4 switches. It belongs with the ESP32 boards of this library.
Main components
3ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAP7361EA-33E
SOT-223-40℃~+85℃@(Ta) 1 1A 3.3V 360mV@(1A) 68uA 6V 75dB Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsDMP2123L-7-VB
SOT-23(TO-236)-55℃~+150℃ 1 P-Channel 1.5V 10nC@4.5V 155pF 180pF 2.5W 20V 4A 60mΩ@10V、65mΩ@4.5V、80mΩ@2.5V 835pF P-Channel SOT-23(TO-236) MOSFETs ROHSVBsemi ElecMOSFETs
README
README.mdGalaxy Light Projector Mod
Modification of a consumer night-light projector, converting it into a smart device with a custom PCB, powered by an ESP-32.
Features
- Alexa integration
- Complex color patterns
- Improved brightness
- Better circuit protection
Custom PCB
KiCad Render (Rev. 1.1)
| Front |
![]() |
| Back |
![]() |
Fabrication Render (Rev. 1.1)
| Front |
![]() |
| Back |
![]() |
Printed Circuit Board (Rev. 1.0)
| Bare |
![]() |
| Assembled Front |
![]() |
| Assembled Back |
![]() |
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R11, R13, R15, R16, R18 |
| 6 | 270 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R10, R12, R14, R17, R19 |
| 6 | BC817-40-7-F | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 5 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C3, C5, C6, C7, C8 |
| 4 | 10 | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R4, R5, R6, R7 |
| 2 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20, R21 |
| 2 | MountingHole | GalaxyLibrary:MountingHole_2mm Galaxy Small | H1, H2 |
| 2 | MountingHole | GalaxyLibrary:2.5mm Big Hole | H3, H4 |
| 1 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 150 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 22uF/10V(20%) | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | AP7361EA | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Boot mode | GalaxyLibrary:Triangle Jumper | J2 |
| 1 | Brightness | GalaxyLibrary:Galaxy Switch | SW2 |
| 1 | Colour | GalaxyLibrary:Galaxy Switch | SW3 |
| 1 | DMP2123L-7 | Package_TO_SOT_SMD:SOT-23 | Q7 |
| 1 | ESP32-WROOM-32 | GalaxyLibrary:ESP32-WROOM-32 No Thermal | U2 |
| 1 | JTAG | GalaxyLibrary:JTAG Connector | J4 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | LED RGBW Connector | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | LOGO | LOGO | G*** |
| 1 | Motor | GalaxyLibrary:Galaxy Switch | SW1 |
| 1 | Motor | GalaxyLibrary:D_SMA_Handsoldering JLCPCB | D3 |
| 1 | Motor Connector | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | On/Off | GalaxyLibrary:Galaxy Switch | SW4 |
| 1 | Polyfuse_Small | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | F1 |
| 1 | Power Header | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Projector Connector | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | USB to UART | GalaxyLibrary:UART Connector | J5 |
Similar boards
- 4 layers45 × 80 mm

- 2 layers24.3 × 57.9 mm

Flosspods pro flex
kenp-io/not-for-airpods-repairs
The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.
15 parts609WTFPL - 4 layers74 × 85 mm

- 4 layers240 × 100 mm

- 2 layers24.1 × 36.2 mm

Esp32miniBT
asterics/esp32_mouse_keyboard
ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)
28 parts911GPL-3.0 - 4 layers99.6 × 76.2 mm

- 4 layers46.8 × 34.8 mm

SmartWatch V4
Bellafaire/ESP32-Smart-Watch
An open source smartwatch based on the ESP32 compatible with the Arduino IDE.
74 parts258MIT - 2 layers90 × 76.5 mm

Questions
How big is the GalaxyModPCB PCB?
It measures 63.5 × 38.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the GalaxyModPCB use?
57 parts, built around the ESP32-WROOM-32, AP7361EA-33E and DMP2123L-7-VB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GalaxyModPCB KiCad files?
From the dimitrivlachos/Galaxy-Light-Projector-Mod repository on GitHub, at the commit this page was made from: the board is PCB/GalaxyModPCB/GalaxyModPCB.kicad_pcb and its schematic PCB/GalaxyModPCB/GalaxyModPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the GalaxyModPCB design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).






