4 layers44 × 44 mm
2 layers69.4 × 21.6 mm
Lcd cnt
dilshan/yali3Yet Another LCD Interface
- Size
- 69.4 × 21.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 30
- Pads
- 104
- Tracks, vias
- 229, 51
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 23 Mar 2023
- Updated
- 30 Mar 2023
Overview
Lcd cnt is an open-source printed circuit board by dilshan, from the dilshan/yali repository on GitHub, published under the MIT licence. It is a 2-layer board of 69.4 × 21.6 mm with 30 parts on 30 nets, routed with 229 tracks and 51 vias.
It is built around the 74HC595, 74HCT08D and MP1540DJ, with the M2.5, SS24 and SS8050 among its other parts. Its parts include 7 resistors, 5 capacitors, 4 connectors, 3 ICs and 1 diode. It belongs with the lEDs and displays and interfaces and adapters boards and the ESP8266 boards of this library.
Main components
6
74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift Registers
74HCT08D
SOP-14-40℃~+125℃ 100mV、330mV 16ns@4.5V,15pF 2 2V 3.84V、4.4V 4 4.5V~5.5V 74HCT 800mV AND Gate TTL compatible CMOS SOP-14 Logic Gates ROHSMDDLogic Gates
MP1540DJ
TSOT23-5TSOT-23-5 New Arrivals ROHSMonolithic Power SystemsUncategorisedM2.5
-0.45mm 2.5mm 2mm 5mm DIN934 Hex M2.5X0.45 Nickel plated Silver white - Hexagonal nutsShuntianHex Nut
SS24
SMA(DO-214AC)-55℃~+150℃ 200uA@40V 2A 40V 50A 550mV@2A Independent SMA(DO-214AC) Schottky Diodes ROHShongjiachengSchottky Diodes
SS8050
SOT-323-55℃~+150℃ 1 NPN 1.5A 100MHz 100nA 200 25V 300mW 500mV 5V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.1MFD | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C5 |
| 3 | SMD-JUMPER | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2, JP3, JP4 |
| 2 | 2.54mm 2x1 Header | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J3 |
| 2 | 2.54mm 3x1 Header | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, JP1 |
| 2 | M2.5 | MountingHole:MountingHole_2.5mm_Pad | H2, H3 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 100R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 10MFD | Capacitor_SMD:CP_Elec_5x5.4 | C2 |
| 1 | 12K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 22K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 330R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 36K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 4.7MFD | Capacitor_SMD:CP_Elec_4x5.8 | C1 |
| 1 | 4.7uH | Inductor_SMD:L_Taiyo-Yuden_NR-60xx_HandSoldering | L1 |
| 1 | 50K | Potentiometer_THT:Potentiometer_Runtron_RM-065_Vertical | RV1 |
| 1 | 74HC595 | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | 74HCT08 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U1 |
| 1 | LOGO | pcbway:pcbway-logo-6mm | H1 |
| 1 | MP1540 | Package_TO_SOT_SMD:TSOT-23-5 | U3 |
| 1 | SS24 | Diode_SMD:D_SMB | D1 |
| 1 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | WC1602A | Display:WC1602A | DS1 |
Questions
How big is the Lcd cnt PCB?
It measures 69.4 × 21.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lcd cnt use?
30 parts, built around the 74HC595, 74HCT08D, MP1540DJ and M2.5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lcd cnt KiCad files?
From the dilshan/yali repository on GitHub, at the commit this page was made from: the board is design/lcd-cnt.kicad_pcb and its schematic design/lcd-cnt.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lcd cnt design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers164 × 60.5 mm
NixieClock
macdems/NixieClock
A compact IN-14 Nixie clock project with both vintage character and modern connectivity.
48 partsCC-BY-SA-4.0 - 4 layers60 × 31 mm
GarageDoor pro
nikolaus018/garageDoor-pro
ESP32-C3 + GPS board that opens the garage door when you leave and arrive: firmware, KiCad PCB and perfboard build
46 parts1MIT - 2 layers92 × 52 mm
Console a
jmcpheron/pico-quorum
Several people, several keys, one Safe. Hardware approvals for Safe multisig wallets.
38 partsMIT - 2 layers90.2 × 90 mm
Sra dev board 2026
SRA-VJTI/sra-board-hardware-design
ESP32-based Development Board for Robotics and Embedded Applications
219 parts81MIT - 2 layers191.5 × 116 mm
PiDaughterBoard
mekatrol/electronics
This repository contains the electronics, embedded firmware, support software, and reference material for a collection of home-automation and workshop projects.
175 parts - 2 layers297.2 × 180.3 mm
- 4 layers304.8 × 330.2 mm
