2 layers169.3 × 128 mm
PSU PCB
ThomasVDD/SmartSupply
SmartSupply is a digital battery powered lab powersupply. It is Arduino compatible and can be controlled via PC over USB.
134 parts96
2 layers100.1 × 70.1 mm
SlowRGB
dileepvr/slowRGBFancy nightlight
- Size
- 100.1 × 70.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 34
- Pads
- 113
- Tracks, vias
- 204, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 30 Jul 2016
- Updated
- 30 Jul 2016
Overview
SlowRGB is an open-source printed circuit board by dileepvr, from the dileepvr/slowRGB repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100.1 × 70.1 mm with 34 parts on 34 nets, routed with 204 tracks and 0 vias.
It is built around the ATMEGA328-PU and LM7805CT. Its parts include 14 resistors, 4 diodes, 3 capacitors, 3 transistors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATMEGA328-PU
PDIP-28-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
LM7805CT
TO-2200℃~+70℃@(Ta) 1 1A 20V 2V@(1A) 40uV 5V 62dB@(120Hz) 8mA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdThis design is being released under GPL_v3. All future versions of GPL automatically apply.
This is a kicad project for a circuit for an RGB LED array nightlight running code on an atmega328p microcontroller.
avr code for microcontroller using arduino libraries will be included.
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1K | R5 | R1, R2, R3, R7, R9 |
| 3 | 200 | R5 | R10, R11, R12 |
| 3 | STATUS_LED | LED-5MM | D2, D3, D4 |
| 3 | TD718 | TD718 | Q1, Q2, Q3 |
| 2 | 0 | R5 | R13, R14 |
| 2 | 10K | R5 | R5, R6 |
| 2 | POT | POT | RV1, RV2 |
| 1 | 100U | CP4 | C1 |
| 1 | 10U | CP4 | C2 |
| 1 | 15K | R5 | R8 |
| 1 | 1U | C2 | C3 |
| 1 | 5K | R5 | R4 |
| 1 | ATMEGA328-P | DIP-28__300 | IC1 |
| 1 | AVR-ISP-6-DR | AVR-ISP-6-DR | CON1 |
| 1 | CODING_SWITCH | Coding_switch | SW2 |
| 1 | DIODE | D4 | D1 |
| 1 | JACK_2P | Jack_2mm | J1 |
| 1 | JUMPER | jumper_2 | JP1 |
| 1 | LM7805CT | TO220_VERT | U1 |
| 1 | RGB_LED_POS | RGB_24W | RGBL1 |
| 1 | SPST | 6A_switch | SW1 |
Similar boards
- 2 layers69.9 × 52.6 mm
ArduiBodet
PatriceG/ArduiBodet
Horloge mère pour Horloge de type Bodet pilotée par Arduino
22 parts5GPL-3.0 - 2 layers150.5 × 90.8 mm
- 2 layers173 × 85 mm
Audio board
EleonoreMizo/pedalevite
Pédale Vite — DIY multi-FX pedalboard for guitar/bass/etc.
268 parts101WTFPL - 2 layers
T41-Main+RF board V012
DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.
255 parts66 - 4 layers97.6 × 145.1 mm
Analog and ad9958
balmerdx/BalmerDX_VNA
Vector Network Analyzer 10 KHz - 180 MHz
226 parts26BSD-2-Clause - 4 layers100 × 100 mm
- 2 layers68 × 89 mm
ParanoiaBox
profdc9/ParanoiaBox
A standalone elliptic curve/AES file encryption and decryption device
60 parts17
Questions
How big is the SlowRGB PCB?
It measures 100.1 × 70.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SlowRGB use?
34 parts, built around the ATMEGA328-PU and LM7805CT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SlowRGB KiCad files?
From the dileepvr/slowRGB repository on GitHub, at the commit this page was made from: the board is slowRGB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SlowRGB design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).