2 layers270 × 135.9 mm
2 layers270 × 140 mm
DigiSlatePlus
digislateplus/digislateplus.github.ioDigiSlate+ is based on the DigiSlate and is inspired by the DIY timecode generator from mitkunz. The aim for the DigiSlate+ is not only to be able to read and display timecode, but also to generate it itself.
- Size
- 270 × 140 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 130
- Nets
- 124
- Pads
- 594
- Tracks, vias
- 1,524, 117
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 24 Aug 2024
- Updated
- 2 Jul 2025
Overview
DigiSlatePlus is an open-source printed circuit board by digislateplus, from the digislateplus/digislateplus.github.io repository on GitHub. It is a 2-layer board of 270 × 140 mm with 130 parts on 124 nets, routed with 1,524 tracks and 117 vias.
It is built around the ESP32-S3-WROOM-1-N8, MAX7219M and LM2596S-ADJ, with the DS3231MZ+, DW01A and TP4056 among its other parts. Its parts include 34 resistors, 25 ICs, 21 capacitors, 14 diodes and 9 connectors. It belongs with the ESP32 boards of this library.
Main components
11
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
MAX7219M
SOP-24-300mil10MHz 150uA 3-Wire Serial Interface 30mA 320mA 4V~5.5V 8 Segment x 8 Digit Built-in display RAM、PWM dimming、BCD input latch function、Power-up display blanking、Lamp test function、Cascadable function SOP-24-300mil Digital Tube Drivers ROHSHGSEMIDigital Tube Drivers
LM2596S-ADJ
TO-263-5-40℃~+125℃@(TA) 1 1.2V~37V 150kHz 3A 40V 80uA Adjustable Buck Buck Built-in No TO-263-5 DC-DC Converters ROHSUMWDC-DC Converters
DS3231MZ+
SOIC-8-40℃~+85℃ 2.3V~5.5V I2C Temperature compensation、Backup power management and battery charging、Alarm function、Periodic interrupt output SOIC-8 Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time Clocks
DW01A
SOT-23-6L-40℃~+85℃ 1 2.5V 300mV~10V 3uA 4.3V Protection IC Support SOT-23-6L Battery Management ROHSPUOLOPBattery Management
TP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery Management100UF 10V 4*7
插件,4x7mm1.5mm 1000hrs@105℃ 100uF 10V 4mm 7mm 插件,4x7mm Aluminum Electrolytic Capacitors - Leaded ROHSLCSCAluminum Electrolytic Capacitors - Leaded220UF 10V 5*7
插件,5x7mm1000hrs@105℃ 10V 220uF 2mm 5mm 7mm 插件,5x7mm Aluminum Electrolytic Capacitors - Leaded ROHSLCSCAluminum Electrolytic Capacitors - Leaded470UF 10V 6.3*7
插件,6.3x7mm1000hrs@105℃ 10V 2.5mm 470uF 6.3mm 7mm 插件,6.3x7mm Aluminum Electrolytic Capacitors - Leaded ROHSLCSCAluminum Electrolytic Capacitors - LeadedFS8205A
SOT-23-6-55℃~+150℃ 1.2V 1.5W 2 N-Channel 20V 31.5mΩ@2.5V 466pF 5.7nC@4.5V 58pF 65pF 6A SOT-23-6 MOSFETs ROHSTECH PUBLICMOSFETs
SS310
SMA(DO-214AC)-55℃~+150℃ 100V 3A 50uA@100V 80A 850mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHShongjiachengSchottky Diodes
README
README.mdDigiSlate+
DigiSlate+ is based on the DigiSlate and is inspired by the DIY timecode generator from mitkunz. The aim for the DigiSlate+ is not only to be able to read and display timecode, but also to generate it itself. To make this possible, the hardware is extended by a real time clock with high running accuracy. The RTC module DS3231 with temperature-compensated quartz offers the possibility.
There are two versions of the DigiSlate+. The simpler version is based on modified hardware from the original DigiSlate project and the software in the master branch.
The newly developed hardware offers significantly more functions. The corresponding code can be found in the dotmatrix branch.
Parts
130| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | SA15-11SRWA | 7-segment-led:FYS-12011A | U3, U4, U5, U6, U8, U9, U10, U11, U12, U13, U14, U15, U17, U18, U19, U20 |
| 12 | 10K | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R4, R12, R16, R26, R27, R28, R29, R30, R32 |
| 9 | 100nF/50V | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C4, C6, C12, C15, C19, C21 |
| 6 | LED | LED_THT:LED_D3.0mm_FlatTop | D1, D2, D3, D4, D5, D6 |
| 6 | MountingHole_3.2mm_M3_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | Hole1, Hole2, Hole3, Hole4, Hole5, Hole6 |
| 5 | 100 | Resistor_SMD:R_1206_3216Metric | R11, R13, R15, R17, R31 |
| 4 | 1 | Button_Switch_THT:SW_Tactile_Straight_KSA0Axx1LFTR | SW2, SW3, SW4, SW5 |
| 4 | 10nF/50V | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8, C10, C13, C17 |
| 4 | 470R | Resistor_SMD:R_1206_3216Metric | R7, R8, R9, R10 |
| 3 | 180 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23, R24, R25 |
| 3 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18, R19, R21 |
| 3 | 20K | Potentiometer_SMD:Potentiometer_Vishay_TS53YL_Vertical | RV1, RV2, RV3 |
| 3 | 2N2222 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q4 |
| 2 | 100uF/10V | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D_Pad2.25x2.55mm_HandSolder | C14, C18 |
| 2 | 1N4148 | Diode_SMD:D_PowerDI-123 | D8, D14 |
| 2 | 220uF/10V | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D_Pad2.25x2.55mm_HandSolder | C16, C20 |
| 2 | 220uF/25V | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D_Pad2.25x2.55mm_HandSolder | C9, C11 |
| 2 | 470uF/10V | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D_Pad2.25x2.55mm_HandSolder | C5, C7 |
| 2 | 4K7 | Resistor_SMD:R_1206_3216Metric | R5, R6 |
| 2 | MAX7219 | Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm | U7, U16 |
| 1 | +8-24 Volt | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J3 |
| 1 | 10K | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV4 |
| 1 | 1K2 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22 |
| 1 | 1K8 | Resistor_SMD:R_1206_3216Metric | R33 |
| 1 | 220R | Resistor_SMD:R_1206_3216Metric | R14 |
| 1 | 360R | Resistor_SMD:R_1206_3216Metric | R20 |
| 1 | 3V3 | LED_SMD:LED_0603_1608Metric | D13 |
| 1 | 5K6 | Resistor_SMD:R_1206_3216Metric | R34 |
| 1 | 5V | LED_SMD:LED_0603_1608Metric | D12 |
| 1 | 68uH | Inductor_SMD:L_7.3x7.3_H3.5 | L1 |
| 1 | BOOT | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW6 |
| 1 | Battery | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J4 |
| 1 | Battery_Cell | Battery:BatteryHolder_ComfortableElectronic_CH273-2450_1x2450 | BT1 |
| 1 | DS3231M | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U2 |
| 1 | DW01A | Package_TO_SOT_SMD:SOT-23-6 | U22 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | EXT | LED_THT:LED_D3.0mm | D11 |
| 1 | FS8205A | Package_SO:TSSOP-8_3x3mm_P0.65mm | Q3 |
| 1 | IO7 | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J10 |
| 1 | KA78M05_TO252 | Package_TO_SOT_SMD:TO-252-2 | U24 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U25 |
| 1 | LED | LED_THT:LED_D10.0mm | D7 |
| 1 | LED_Dual_KAK | LED_THT:LED_D3.0mm-3 | D9 |
| 1 | LM2596S-ADJ | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U21 |
| 1 | LOGO | Logos:Open-Source-Hardware-Logo | OHW-Logo |
| 1 | MISO | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J9 |
| 1 | Mains | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J6 |
| 1 | RotaryEncoder-SW | Rotary_Encoder:RotaryEncoder_Bourns_Horizontal_PEC12R-2x17F-Sxxxx | SW1 |
| 1 | SS310 | Diode_SMD:D_SMA | D10 |
| 1 | SW_DPDT_x2 | Button_Switch_THT:SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW7 |
| 1 | Serial | Connector_JST:JST_XH_B5B-XH-AM_1x05_P2.50mm_Vertical | J1 |
| 1 | TP4056 | TP4056:TP4056-42-ESOP8_TPW | U23 |
| 1 | Timecode IN | Connector_Audio:Jack_3.5mm_CUI_SJ1-3525N_Horizontal | J7 |
| 1 | Timecode OUT | Connector_Audio:Jack_3.5mm_CUI_SJ1-3525N_Horizontal | J8 |
| 1 | USB_B | Connector_USB:USB_B_Lumberg_2411_02_Horizontal | J2 |
| 1 | WC1602A | Display:WC1602A | DS1 |
| 1 | charge | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
The 129 most common of 130 parts.
Questions
How big is the DigiSlatePlus PCB?
It measures 270 × 140 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DigiSlatePlus use?
130 parts, built around the ESP32-S3-WROOM-1-N8, MAX7219M, LM2596S-ADJ and DS3231MZ+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DigiSlatePlus KiCad files?
From the digislateplus/digislateplus.github.io repository on GitHub, at the commit this page was made from: the board is hardware/PCB/DigiSlatePlus.kicad_pcb and its schematic hardware/PCB/DigiSlatePlus-Power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DigiSlatePlus design in my own project?
Its repository states no licence, so its author keeps all rights: ask digislateplus before reusing the design.
Similar boards
- 2 layers66 × 58.4 mm
- 2 layers96.5 × 73.2 mm
Bt radio manager e01
marianobilli/bluetooth-radio-manager
A self-contained, battery-powered box that puts four 2.4 GHz radios under one ESP32-S3, with a small OLED and encoder UI, in a 3D-printed case.
32 parts - 2 layers100 × 80 mm
Layouts
jamesburton/Lolin32OLEDLaserTagTest
Reverse-engineering, decoding, and transmitting Vatos infrared laser-tag signals across two ESP32 boards:
38 parts1 - 2 layers162.6 × 147.3 mm
EnAcess PCB
jumarubea/OpenSmartMeter
Low-cost & OEM agnostic GSM prepaid smart energy meter with a customizable API.
153 partsMIT - 4 layers95 × 76.2 mm
- 4 layers78.5 × 91 mm
- 2 layers88.9 × 89.9 mm
