Skip to the content
2 layers83.8 × 78.7 mmTheremin Midi, the printed circuit board in 3D
Size
83.8 × 78.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
29
Pads
56
Tracks, vias
68, 0
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
7 Sep 2023
Updated
1 Dec 2023

Overview

Theremin Midi is an open-source printed circuit board by Diego5267g, from the Diego5267g/Theremin-Midi repository on GitHub. It is a 2-layer board of 83.8 × 78.7 mm with 11 parts on 29 nets, routed with 68 tracks and 0 vias.

It is built around the BUTT-2 and HC-SR04. Its parts include 3 switches and 2 ICs. It belongs with the audio and music boards and the ESP32 boards of this library.

Main components

2

Parts

11
QtyValueFootprintReferences
4MountingHole_2.2mm_M2_ISO7380_PadMountingHole:MountingHole_2.2mm_M2_ISO7380_Pad1, 2, 3, 4
3BUTT-2BUTT-2:SW_BUTT-2S1, S2, S3
2HC-SR04HC-SR04:XCVR_HC-SR04DER1, IZQ1
1ESP32-DEVKIT-V1ESP32-DEVKIT-V1:MODULE_ESP32_DEVKIT_V1U1
1LCD1602LCD1602:LCD1602-PORTU2

Similar boards

  • 2 layersWii controller esp dsu, the printed circuit board in 3D

    Wii controller esp dsu

    filipeparreira/wii-controller-esp-dsu

    Emulação de um controle de movimento utilizando MPU-6500 e um ESP32 Devkit V1, por meio do protocolo DSU.

    11 parts5MIT
  • 2 layersGrad project, the printed circuit board in 3D

    Grad project

    Eng-Youssef-Yassin/sos-wearable-device

    A wearable safety device for industrial environments. A worker wears a UWB tag; fixed anchor stations track its position in real time and a web dashboard shows where every worker is.

    44 parts
  • 2 layers140 × 169 mmMoustika, the printed circuit board in 3D

    Moustika

    xXsenseiXx/line_follower

    <<<<<<< Updated upstream # linefollower / \ //@@@\ /@@@\\ \\@@@/ \@@@// \ " / | - | \/

    16 parts
  • 2 layers80 × 60 mmEnvMonitor, the printed circuit board in 3D

    EnvMonitor

    kennySzhucheng/EnvMonitor

    🌡️ 智能环境监测站 | STM32F103C8T6 + FreeRTOS + ESP8266 | 温湿度/光照/测距/OLED菜单/ThingSpeak上云 | 从裸机到RTOS到KiCad PCB全流程

    27 parts10
  • 2 layers120.7 × 184.1 mmBeachRover circuit, the printed circuit board in 3D

    BeachRover circuit

    wizardofrobots/roverCode

    Jetson Nano powered Arduino Rover

    11 parts10
  • 2 layers110 × 80 mmNoko 2, the printed circuit board in 3D

    Noko 2

    NikolaiRadke/Noko_2

    The do-it-yourself Arduino-based Noko monster. Version 2 with PCB and 3D printed casing.

    51 parts3Apache-2.0
  • 2 layers150 × 100 mmMaze kiCad, the printed circuit board in 3D

    Maze kiCad

    billtsol/Maze

    This project demonstrates how to use an Arduino board, IR sensors, and a motor driver shield to create a maze-solving robot.

    39 parts2
  • 2 layers111.5 × 102 mmWall e, the printed circuit board in 3D

    Wall e

    c-lydia/ESP-ROS2

    A tiny robot with IMU (MPU5060) and an ultrasonic sensor (HC-SR04), running on micro-ROS, communicating over UDP.

    12 parts2Apache-2.0

Questions

How big is the Theremin Midi PCB?

It measures 83.8 × 78.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Theremin Midi use?

11 parts, built around the BUTT-2 and HC-SR04. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Theremin Midi KiCad files?

From the Diego5267g/Theremin-Midi repository on GitHub, at the commit this page was made from: the board is PCB/theremin MIDI.kicad_pcb and its schematic PCB/theremin MIDI.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Theremin Midi design in my own project?

Its repository states no licence, so its author keeps all rights: ask Diego5267g before reusing the design.