

.kicad_pcb
This repository contains all the AZOR 1.0 board KiCad files.
- Size
- 100 × 105 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 174
- Nets
- 144
- Pads
- 737
- Tracks, vias
- 2,572, 424
- Pours
- 17
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 8 Sep 2016
- Updated
- 8 Sep 2016
Overview
.kicad_pcb is an open-source printed circuit board by didix21, from the didix21/AZOR repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 100 × 105 mm with 174 parts on 144 nets, routed with 2,572 tracks and 424 vias.
It is built around the ATSAM3X8EA-AU, DRV8825PWP and TC2117-3.3VDBTR, with the BSH105, IPD036N04L G and PMV40UN2 among its other parts. Its parts include 52 capacitors, 47 resistors, 21 connectors, 16 diodes and 8 ICs. It belongs with the SAM D and SAM boards of this library.
Main components
6ATSAM3X8EA-AU
LQFP-144(20x20)-40℃~+85℃ 1.62V~3.6V 100KB 103 12bit 12bit 32 Bit 512KB 84MHz ARM Cortex-M3 Built-in FLASH LQFP-144(20x20) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)DRV8825PWP
HTSSOP-28-EP-40℃~+85℃ 2 2.5A 200mΩ 32 8.2V~45V Bipolar Driver STEP/DIR Yes HTSSOP-28-EP Stepper Motor Driver ROHSTexas InstrumentsStepper Motor DriverTC2117-3.3VDBTR
SOT-223-40℃~+125℃@(Tj) 1 3.3V 450mV@(800mA) 55dB@(1kHz) 6V 800mA 80uA Fixed Over Current Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBSH105
SOT23-320V, 1.05A, N-Channel Enhancement Mode MOS TransistorNexperiaUncategorisedIPD036N04L G
TO-252-55℃~+175℃ 1 N-channel 1.3nF 2V 3.6mΩ@10V 40V 54pF 6.3nF 78nC@10V 90A 94W N-Channel TO-252 MOSFETs ROHSInfineon TechnologiesMOSFETsPMV40UN2
SOT23-330V, 4.4A, N-Channel Trench MOSFETNexperiaUncategorised
README
README.mdAZOR
This repository contains all the AZOR 1.0 board KiCad files.
About Hardware
AZOR 1.0 is based on DUET 0.85 created by dc42. I have done very important modifications as delete Ethernet and micro SD ports. Instead, I have added a USB 2.0 port to read USB Sticks.
Moreover, the integrated steppers A4982 have been deleted and instead of that, I have placed HEADER PINS to connect drivers as A4988 or DRV8825.
About Software
AZOR 1.0 use Marlin4AZOR, it is a modified version of work done by Wurstnase. In other words it is based on Marlin4Due.
Main Features
- MCU: 32-bits, ATSAM3X8E-AU.
- Port Expansion
- Support for drivers: A4982 and DRV8825.
- Two FAN PWM ports.
- PTS-Panel Header Pin port.
- SD Header Pin Port.
- USB 2.0 port.
License
Marlin is published under the GPL license.
Parts
174| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 0u1 | C_0603 | C5, C40, C41, C42, C43, C46, C48, C49, C50, C51, C52, C60, C62, C64, C67, C112 +6 |
| 10 | 100u | C_ELEC_6.3x7.7 | C3, C22, C23, C32, C33, C92, C94, C99, C102, C113 |
| 7 | 10u | C_0805 | C4, C18, C19, C47, C53, C97, C98 |
| 6 | 4k7 | R_0603 | R55, R65, R67, R68, R98, R100 |
| 5 | 100Mhz | R_0603 | L3, L4, L5, L6, L7 |
| 5 | 10K | R_0603 | R24, R80, R81, R82, R99 |
| 5 | 10k | R_0603 | R26, R28, R38, R40, R89 |
| 5 | DRV8825_ | DRV8825 | U5, U6, U7, U8, U11 |
| 4 | 100R | R_0603 | R56, R57, R58, R59 |
| 4 | 470R | R_0603 | R18, R22, R60, R79 |
| 4 | 4u7 | C_0805 | C59, C61, C66, C68 |
| 4 | BSH105 | SOT-23 | TR1, TR3, TR6, TR7 |
| 4 | VAL** | Fiducial | Fid, Fid, Fid, Fid |
| 3 | Fixing_M3 | , , | |
| 3 | 100k | R_0603 | R25, R77, R78 |
| 3 | 10p | C_0603 | C44, C45, C65 |
| 3 | 220R | R_0603 | R20, R23, R97 |
| 3 | 4K7 | R_0603 | R19, R21, R53 |
| 3 | 680R | R_0603 | R69, R70, R72 |
| 3 | IPD036N04L | D-PAK | TR2, TR4, TR8 |
| 2 | 0R1 | R_1206 | R85, R86 |
| 2 | 1u | C_0603 | C13, C95 |
| 2 | 39R 1% | R_0603 | R2, R3 |
| 2 | GND | TP | J26, J27 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | PMV40UN2 | SOT-23 | TR5, TR9 |
| 2 | SS14M | uSMA | D13, D14 |
| 2 | SS3P4 | DO-220AA | D1, D2 |
| 1 | 0u01 | C_0603 | C2 |
| 1 | 100K | R_0603 | R84 |
| 1 | 10nF | C_0603 | C90 |
| 1 | 10uH | L_6x6 | L1 |
| 1 | 22nF | C_0603 | C96 |
| 1 | 2K15 | R_0603 | R61 |
| 1 | 2k7 | R_0603 | R54 |
| 1 | 2u2 | C_0603 | C1 |
| 1 | 3.3V | D_0603 | D16 |
| 1 | 3K3 | R_0603 | R1 |
| 1 | 3K92 | R_0603 | R87 |
| 1 | 5V+ | D_0603 | D17 |
| 1 | 5V_EN | JUMPER | JP9 |
| 1 | 6k8 | R_0603 | R48 |
| 1 | 750R | R_0603 | R88 |
| 1 | A4403 | QFN16-4x4 | U3 |
| 1 | ATSAM3X8E | LQFP144 | U1 |
| 1 | ATX_5V_EN | JUMPER | JP10 |
| 1 | BED HEAT | TERM_2-WAY_6.35mm | J4 |
| 1 | BED TEMP | PIN_ARRAY_2X1 | J5 |
| 1 | Bed Heat | D_0603 | D6 |
| 1 | CONN2X18 | PIN_ARRAY_18X2 | J1 |
| 1 | CRYSTAL_4PIN | Xtal_5x3.2 | X2 |
| 1 | E0 HEAT | PIN_ARRAY_2X1 | J11 |
| 1 | E0 Heat | D_0603 | D7 |
| 1 | E0 MOT | PIN_ARRAY_4x1 | J10 |
| 1 | E0 TEMP | PIN_ARRAY_2X1 | J12 |
| 1 | E1 HEAT | PIN_ARRAY_2X1 | J13 |
| 1 | E1 Heat | D_0603 | D20 |
| 1 | E1 MOT | PIN_ARRAY_4x1 | J6 |
| 1 | E1 TEMP | PIN_ARRAY_2X1 | J14 |
| 1 | ERASE | SW_LITTLE_PCB_1 | S2 |
| 1 | FAN 0 | PIN_ARRAY_2X1 | J25 |
| 1 | FAN 1 | PIN_ARRAY_2X1 | J29 |
| 1 | FAN0 | D_0603 | D8 |
| 1 | FAN1 | D_0603 | D21 |
| 1 | POWER IN | TERM_2-WAY_6.35mm | J23 |
| 1 | PanelDUE | PIN_ARRAY_4x1 | J30 |
| 1 | RESET | SW_LITTLE_PCB_1 | S1 |
| 1 | TC2117-3.3VDBTR | SOT-223 | U2 |
| 1 | USB | uUSB_new | J22 |
| 1 | USB | D_0603 | D3 |
| 1 | USB-A-PCB | USB_A | P1 |
| 1 | VIN | D_0603 | D15 |
| 1 | X MOT/STOP | PIN_ARRAY_7X1 | J9 |
| 1 | X Stop | D_0603 | D12 |
| 1 | Y MOT/STOP | PIN_ARRAY_7X1 | J8 |
| 1 | Y Stop | D_0603 | D9 |
| 1 | Z MOT | PIN_ARRAY_4x1 | J15 |
| 1 | Z MOT/STOP | PIN_ARRAY_7X1 | J7 |
| 1 | Z Stop | D_0603 | D10 |
| 1 | azor_name_logo | azor_name_logo_1_0_0 | G*** |
More from didix21/AZOR
1- 4 layers100 × 105 mm

Similar boards
- 2 layers100 × 71 mm

Armed
ed-ni/Armed
Arduino compatbile using the Arduino Core STM32 and working with the Marlin 2.0 3D printer firmware.
210 parts - 4 layers100 × 123 mm

Duet2Maestro
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
341 parts258 - 2 layers55.9 × 121.3 mm

Tregatti stable
tregatti-tech/ESP32ECG
Open design/code version of ECG device based on esp32
147 parts9 - 4 layers62 × 82 mm

Ultimate invitation card
espena/ultimate-invitation-card
Invitation card for real nerds.
55 parts4GPL-3.0 - 2 layers100 × 80 mm

- 4 layers102 × 99.9 mm

PCB Parafoil Serendipity
NathanGrn/PCB_Parafoil_Serendipity
PCB for an autonomous parafoil guidance system integrated in Serendipity, an experimental rocket developed in-house at CNES by the PERSEUS project. Original project on GitLab:
165 parts - 2 layers76.2 × 101.6 mm

- 2 layers90 × 60 mm

Questions
How big is the .kicad_pcb PCB?
It measures 100 × 105 mm and has 4 copper layers, 1.6 mm thick.
What parts does the .kicad_pcb use?
174 parts, built around the ATSAM3X8EA-AU, DRV8825PWP, TC2117-3.3VDBTR and BSH105. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the .kicad_pcb KiCad files?
From the didix21/AZOR repository on GitHub, at the commit this page was made from: the board is AZOR_1_0/.kicad_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the .kicad_pcb design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).