Skip to the content
1234

TC2117-3.3VDBTR

Microchip TechnologyExtended

-40℃~+125℃@(Tj) 1 3.3V 450mV@(800mA) 55dB@(1kHz) 6V 800mA 80uA Fixed Over Current Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
microchip/TC2117-3.3VDBTR
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-223
Pins
4
In stock
583 at JLCPCB (C98655)
Used on
7 open-source boards

Overview

The TC2117-3.3VDBTR is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Microchip Technology in a SOT-223 package with 4 pins. -40℃~+125℃@(Tj) 1 3.3V 450mV@(800mA) 55dB@(1kHz) 6V 800mA 80uA Fixed Over Current Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1GND_2OUT_3IN_4OUT, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-223, from KiCad's library), ready for a KiCad board. 583 are in stock at JLCPCB (part C98655). 7 open-source boards in 6 repositories on GitHub use it.

Symbol

3IN2OUT1GND
Pinmap_Generic:Regulator_Linear_1GND_2OUT_3IN_4OUTFrom PCBKit's generic symbols

Footprint

1234
Package_TO_SOT_SMD:SOT-223From KiCad's library

From the datasheet

21
Supply, least
2.7 V · VIN, recommended operating min; also requires VIN ≥ VR + VDROPOUT · p. 2
Supply, most
6 V · VIN, recommended operating max · p. 2
Supply, absolute maximum
6.5 V · VIN, absolute maximum · p. 2
Works from
-40 °C · TA, specified ambient min; TJ must not exceed 125°C · p. 3
Works up to
125 °C · TA, specified ambient max; TJ must not exceed 125°C · p. 3
Junction, hottest
125 °C · TJ, operating junction max · p. 3
Takes working
80 µA · IDD, typical supply current, SHDN = VIH, IL = 0 · p. 2
Gives
800 mA · Rated continuous output current · p. 2
Current limit
1.2 A · Typical output short circuit current, VOUT = 0V · p. 2
Output
3.3 V · Fixed nominal output, 3.3V option · p. 1
Dropout
20 mV · Typical dropout, IL = 100 uA, VR ≥ 2.5V · p. 2
Dropout
50 mV · Typical dropout, IL = 100 mA, VR ≥ 2.5V · p. 2
Dropout
150 mV · Typical dropout, IL = 300 mA, VR ≥ 2.5V · p. 2
Dropout
260 mV · Typical dropout, IL = 500 mA, VR ≥ 2.5V · p. 2
Dropout
450 mV · Typical dropout, IL = 800 mA, VR ≥ 2.5V · p. 2
Junction to air (3L-SOT-223)
59 K/W · Typical junction to ambient thermal resistance · p. 3
Junction to air (3-PIN SOT-223)
45 K/W · 2500 sq mm top copper, 2500 sq mm back copper, 2500 sq mm board · p. 7
Junction to air (3-PIN SOT-223)
53 K/W · 225 sq mm top copper, 2500 sq mm back copper, 2500 sq mm board · p. 7
Junction to air (3-PIN SOT-223)
59 K/W · 100 sq mm top copper, 2500 sq mm back copper, 2500 sq mm board · p. 7
Junction to air (3-PIN SOT-223)
52 K/W · 1000 sq mm top copper, 1000 sq mm back copper, 1000 sq mm board · p. 7
Junction to air (3-PIN SOT-223)
55 K/W · 1000 sq mm top copper, no back copper, 1000 sq mm board · p. 7

What it is and has

2
Protection
Overcurrent and overtemperature protection · p. 1
Package
SOT-223 · p. 1

Around it

2
cap 1 µF (min)
between VOUT and GND; Required; effective series resistance 0.2Ω to 10Ω. Aluminum electrolytic or tantalum; solid tantalum recommended below -25°C. · p. 7
cap 1 µF
between VIN and GND; Required when more than 10 inches of wire separate the regulator and AC filter capacitor, or when using a battery. Aluminum electrolytic or tantalum. · p. 7

Specifications

29
ParameterConditionsAs printedPage
Input Voltagemax 6.5 V2
Maximum Voltage on Any PinVIN +0.3V to -0.3Vmin -0.3 V2
Operating Temperature TJ-40°C < TJ < +125°Cmin -40 · max 125 °C2
Storage temperaturemin -65 · max 150 °C2
Input Operating Voltage VINNote 2: VIN ≥ VR + VDROPOUT and VIN ≥ 2.7Vmin 2.7 · max 6 V2
Maximum Output Current IOUTMAXmin 800 mA2
VOUT Temperature Coefficient VOUT/TNote 3typ 40 ppm/°C2
Line Regulation VOUT/VIN(VR + 1V) ≤ VIN ≤ 6Vtyp 0.007 · max 0.35 %2
Load Regulation (Note 4) VOUT/VOUTIL = 0.1 mA to IOUTMAXmin -0.01 · typ 0.002 · max 0 %/mA2
Dropout Voltage (Note 5) VIN–VOUTVR ≥ 2.5V, IL = 100 uAtyp 20 · max 30 mV2
Dropout Voltage (Note 5) VIN–VOUTVR ≥ 2.5V, IL = 100 mAtyp 50 · max 160 mV2
Dropout Voltage (Note 5) VIN–VOUTVR ≥ 2.5V, IL = 300 mAtyp 150 · max 480 mV2
Dropout Voltage (Note 5) VIN–VOUTVR ≥ 2.5V, IL = 500 mAtyp 260 · max 800 mV2
Dropout Voltage (Note 5) VIN–VOUTVR ≥ 2.5V, IL = 800 mAtyp 450 · max 1300 mV2
Supply Current IDDSHDN = VIH, IL = 0typ 80 · max 130 uA2
Power Supply Rejection Ratio PSRRF ≤ 1 kHztyp 55 db2
Output Short Circuit Current IOUTSCVOUT = 0Vtyp 1200 mA2
Thermal Regulation VOUT/PDNote 6typ 0.04 V/W2
Output Noise eNIL = 100 mA, F = 10 kHZtyp 300 nV/Hz2
Specified Temperature Range TANote 1: operation must not cause TJ to exceed +125°Cmin -40 · max 125 °C3
Operating Temperature Range TJmin -40 · max 125 °C3
Storage Temperature Range TAmin -65 · max 150 °C3
Thermal Resistance, 3L-SOT-223 JA3L-SOT-223typ 59 °C/W3
Thermal Resistance JA3-PIN SOT-223; top copper 2500 sq mm; back copper 2500 sq mm; board 2500 sq mm; tab attached to topside coppertyp 45 °C/W7
Thermal Resistance JA3-PIN SOT-223; top copper 1000 sq mm; back copper 2500 sq mm; board 2500 sq mm; tab attached to topside coppertyp 45 °C/W7
Thermal Resistance JA3-PIN SOT-223; top copper 225 sq mm; back copper 2500 sq mm; board 2500 sq mm; tab attached to topside coppertyp 53 °C/W7
Thermal Resistance JA3-PIN SOT-223; top copper 100 sq mm; back copper 2500 sq mm; board 2500 sq mm; tab attached to topside coppertyp 59 °C/W7
Thermal Resistance JA3-PIN SOT-223; top copper 1000 sq mm; back copper 1000 sq mm; board 1000 sq mm; tab attached to topside coppertyp 52 °C/W7
Thermal Resistance JA3-PIN SOT-223; top copper 1000 sq mm; back copper 0 sq mm; board 1000 sq mm; tab attached to topside coppertyp 55 °C/W7

Open-source boards using it

7
  • 2 layers55.9 × 121.3 mmTregatti stable, the printed circuit board in 3D

    Tregatti stable

    tregatti-tech/ESP32ECG

    Open design/code version of ECG device based on esp32

    147 parts9
  • 4 layers62 × 82 mmUltimate invitation card, the printed circuit board in 3D

    Ultimate invitation card

    espena/ultimate-invitation-card

    Invitation card for real nerds.

    55 parts4GPL-3.0
  • 2 layers100 × 80 mmTraction hub, the printed circuit board in 3D

    Traction hub

    davidmlr/traction-hub

    ESC Design with STM32

    93 parts1
  • 4 layers100 × 105 mmAzor 1.0, the printed circuit board in 3D

    Azor 1.0

    didix21/AZOR

    This repository contains all the AZOR 1.0 board KiCad files.

    183 partsGPL-3.0
  • 4 layers102 × 99.9 mmPCB Parafoil Serendipity, the printed circuit board in 3D

    PCB Parafoil Serendipity

    NathanGrn/PCB_Parafoil_Serendipity

    PCB for an autonomous parafoil guidance system integrated in Serendipity, an experimental rocket developed in-house at CNES by the PERSEUS project. Original project on GitLab:

    165 parts
  • 4 layers100 × 105 mm.kicad_pcb, the printed circuit board in 3D

    .kicad_pcb

    didix21/AZOR

    This repository contains all the AZOR 1.0 board KiCad files.

    174 partsGPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TC2117-3.3VDBTR?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1GND_2OUT_3IN_4OUT and the footprint Package_TO_SOT_SMD:SOT-223, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TC2117-3.3VDBTR?

SOT-223, with 4 pins. Its footprint is drawn on this page.

Where is the TC2117-3.3VDBTR datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the TC2117-3.3VDBTR?

JLCPCB lists it as part C98655, with 583 in stock; the sellers' links on this page open their listings.

What can replace the TC2117-3.3VDBTR?

Parts like it in the library: the NCP1117ST33 by onsemi, the AZ1117H-3.3TRE1 by Diodes Incorporated, the LD1117AG-33-AA3-A-R by UTC and the AZ1117CH-3.3TRG1 by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TC2117-3.3VDBTR?

7 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.