
PowerMeter
dianventer/OpenAmpMeter
A Low Cost ESP32 C3 based current meter. Hardware is availble in two versions. Firmware currently in progress. Webapp and server code to come soon

A Low Cost ESP32 C3 based current meter. Hardware is availble in two versions. Firmware currently in progress. Webapp and server code to come soon
PowerMeterLC is an open-source printed circuit board by dianventer, from the dianventer/OpenAmpMeter repository on GitHub. It is a 4-layer board of 30 × 50 mm with 31 parts on 30 nets, routed with 135 tracks and 113 vias.
It is built around the ESP32-C3-WROOM-02-H4 and AMS1117-3.3. Its parts include 12 capacitors, 10 resistors, 3 switches, 2 ICs and 2 connectors. It belongs with the ESP32 and RISC-V boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nF 25V | Capacitor_SMD:C_0603_1608Metric | C5, C6, C10, C11, C13, C16, C17, C18 |
| 5 | 5K1 | Resistor_SMD:R_0603_1608Metric | R2, R3, R4, R5, R6 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric | C12, C14, C15, C19 |
| 3 | 100 | Resistor_SMD:R_0603_1608Metric | R7, R8, R9 |
| 3 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1, SW2, SW3 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric | R10, R11 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | AudioJack4 | Audio_Ext:Jack_3.5mm_PJ320E_Horizontal | J3 |
| 1 | ESP32-C3-WROOM-02 | Espressif:ESP32-C3-WROOM-02 | U4 |
| 1 | LED_GBAR | LED_THT:LED_D5.0mm-4_RGB | D2 |
| 1 | TestPoint | MountingHole:MountingHole_2.5mm_Pad_Via | TP1 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J2 |

dianventer/OpenAmpMeter
A Low Cost ESP32 C3 based current meter. Hardware is availble in two versions. Firmware currently in progress. Webapp and server code to come soon


nepyope/Project-Homunculus
Project Homunculus is open-source, low-cost hardware for capturing human hand and arm motions. It has two parts.




74th/esp32c3-iot-server-board
Board for converting Grove device to IoT Server using ESP32-C3-WROOM-02.

Domiko7/NexaSeis
Acquisition and processing server for the NexaSeis collaborative seismic network

oltdaniel/PCB_deskDisplay
a small esp32-c3 PCB for an I²C display, NeoPixel and Button for smart home stuff.
It measures 30 × 50 mm and has 4 copper layers, 1.6 mm thick.
31 parts, built around the ESP32-C3-WROOM-02-H4 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dianventer/OpenAmpMeter repository on GitHub, at the commit this page was made from: the board is Hardware/PowerMeterLC/PowerMeterLC.kicad_pcb and its schematic Hardware/PowerMeter/PowerMeter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask dianventer before reusing the design.