2 layers56 × 60 mm
2 layers156 × 60 mm
PowerAmpModule
Dguto9/modular-amp- Size
- 156 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 14
- Pads
- 73
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 7 (file 20221018)
- Created
- 12 Jul 2024
- Updated
- 21 Jul 2024
Overview
PowerAmpModule is an open-source printed circuit board by Dguto9, from the Dguto9/modular-amp repository on GitHub. It is a 2-layer board of 156 × 60 mm with 20 parts on 14 nets.
Its parts include 7 connectors, 6 resistors, 2 ICs and 1 capacitor.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1K5 | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R5, R6 |
| 2 | 220K | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R1, R2 |
| 2 | 5K6 | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R3, R4 |
| 2 | 6V6 | CustomFootprints:BELTON_VT8-PTL-01 | U1, U2 |
| 1 | 20uF | Capacitor_THT:CP_Radial_D13.0mm_P5.00mm | C1 |
| 1 | Heater | CustomFootprints:Molex_Micro-Fit_3.0_43045-0412_2x02_P3.00mm_Vertical | J4 |
| 1 | HeaterOut | CustomFootprints:Molex_Micro-Fit_3.0_43045-0412_2x02_P3.00mm_Vertical | J5 |
| 1 | Inductor | CustomFootprints:Molex_Micro-Fit_3.0_43650-0215_1x02_P3.00mm_Vertical | J7 |
| 1 | Power | CustomFootprints:Molex_Micro-Fit_3.0_43650-0315_1x03_P3.00mm_Vertical | J2 |
| 1 | PowerOut | CustomFootprints:Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal | J6 |
| 1 | Signal | CustomFootprints:Molex_Micro-Fit_3.0_43650-0300_1x03_P3.00mm_Horizontal | J1 |
| 1 | SignalOut | CustomFootprints:Molex_Micro-Fit_3.0_43650-0315_1x03_P3.00mm_Vertical | J3 |
The 16 most common of 20 parts.
Questions
How big is the PowerAmpModule PCB?
It measures 156 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PowerAmpModule use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PowerAmpModule KiCad files?
From the Dguto9/modular-amp repository on GitHub, at the commit this page was made from: the board is PowerAmpModule/PowerAmpModule.kicad_pcb and its schematic EQModule/EQModule.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PowerAmpModule design in my own project?
Its repository states no licence, so its author keeps all rights: ask Dguto9 before reusing the design.
More from Dguto9/modular-amp
5- 2 layers56 × 60 mm
- 2 layers70.5 × 41.9 mm
- 2 layers56 × 60 mm
- 2 layers30 × 38 mm
Similar boards
- 2 layers66.9 × 74.5 mm
- 2 layers86.4 × 64.8 mm
- 2 layers36.2 × 26.8 mm
Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm
Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm
TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm
Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm
FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772