2 layers56 × 60 mm
2 layers56 × 60 mm
PIModule
Dguto9/modular-amp- Size
- 56 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 18
- Pads
- 75
- Tracks, vias
- 122, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 12 Jul 2024
- Updated
- 21 Jul 2024
Overview
PIModule is an open-source printed circuit board by Dguto9, from the Dguto9/modular-amp repository on GitHub. It is a 2-layer board of 56 × 60 mm with 29 parts on 18 nets, routed with 122 tracks and 0 vias.
Its parts include 9 resistors, 8 connectors, 7 capacitors and 1 IC.
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.022uF | Capacitor_THT:C_Rect_L13.0mm_W4.0mm_P10.00mm_FKS3_FKP3_MKS4 | C3, C4, C7 |
| 2 | 0.1uF | CustomFootprints:FG26 Cap | C2, C5 |
| 2 | 100K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R6, R9 |
| 2 | 1M | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1, R5 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R4 |
| 1 | 20uF | Capacitor_THT:CP_Radial_D13.0mm_P5.00mm | C6 |
| 1 | 470 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R3 |
| 1 | 47pF | CustomFootprints:FG26 Cap | C1 |
| 1 | 4K7 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R7 |
| 1 | 6K8 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R8 |
| 1 | 82K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2 |
| 1 | ECC83 | CustomFootprints:BELTON_VT9-PT | U1 |
| 1 | HV | CustomFootprints:Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal | J5 |
| 1 | HVOut | CustomFootprints:Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal | J2 |
| 1 | Heater | CustomFootprints:Molex_Micro-Fit_3.0_43650-0215_1x02_P3.00mm_Vertical | J3 |
| 1 | HeaterOut | CustomFootprints:Molex_Micro-Fit_3.0_43650-0215_1x02_P3.00mm_Vertical | J4 |
| 1 | NFB | CustomFootprints:Molex_Micro-Fit_3.0_43650-0215_1x02_P3.00mm_Vertical | J7 |
| 1 | PresencePot | CustomFootprints:Molex_Micro-Fit_3.0_43650-0315_1x03_P3.00mm_Vertical | J8 |
| 1 | SigIn | CustomFootprints:Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal | J1 |
| 1 | SigOut | CustomFootprints:Molex_Micro-Fit_3.0_43650-0300_1x03_P3.00mm_Horizontal | J6 |
The 25 most common of 29 parts.
More from Dguto9/modular-amp
5- 2 layers156 × 60 mm
- 2 layers70.5 × 41.9 mm
- 2 layers56 × 60 mm
- 2 layers30 × 38 mm
Similar boards
- 2 layers52.3 × 10.5 mm
StackLink
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
29 parts5.1kGPL-3.0 - 2 layers56 × 20 mm
HallEffectXY Endstop
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
29 parts1.1kGPL-3.0 - 2 layers50 × 23.2 mm
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
29 parts1kGPL-3.0 - 2 layers16.8 × 13.6 mm
E Fidget Lite
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
29 parts915 - 2 layers85 × 12.5 mm
TERES PCB3-TOUCH BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
29 parts578Apache-2.0 - 2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 2 layers80 × 55 mm
- 2 layers55 × 58 mm
Questions
How big is the PIModule PCB?
It measures 56 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PIModule use?
29 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PIModule KiCad files?
From the Dguto9/modular-amp repository on GitHub, at the commit this page was made from: the board is PIModule/PIModule.kicad_pcb and its schematic EQModule/EQModule.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PIModule design in my own project?
Its repository states no licence, so its author keeps all rights: ask Dguto9 before reusing the design.