2 layers56 × 60 mm
2 layers56 × 60 mm
Gain1Module
Dguto9/modular-amp- Size
- 56 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 17
- Pads
- 67
- Tracks, vias
- 120, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 12 Jul 2024
- Updated
- 21 Jul 2024
Overview
Gain1Module is an open-source printed circuit board by Dguto9, from the Dguto9/modular-amp repository on GitHub. It is a 2-layer board of 56 × 60 mm with 25 parts on 17 nets, routed with 120 tracks and 0 vias.
Its parts include 8 resistors, 6 capacitors, 6 connectors and 1 IC.
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100K | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R4, R7 |
| 2 | 22n | Capacitor_THT:C_Rect_L13.0mm_W4.0mm_P10.00mm_FKS3_FKP3_MKS4 | C1, C5 |
| 1 | 0.68uF | Capacitor_THT:C_Rect_L10.0mm_W4.0mm_P7.50mm_MKS4 | C2 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R10 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R6 |
| 1 | 1M | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1 |
| 1 | 1n | CustomFootprints:FG26 Cap | C4 |
| 1 | 20uF | Capacitor_THT:CP_Radial_D13.0mm_P5.00mm | C7 |
| 1 | 2K7 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R3 |
| 1 | 470K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R5 |
| 1 | 470p | CustomFootprints:FG26 Cap | C3 |
| 1 | 68K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2 |
| 1 | ECC83 | CustomFootprints:BELTON_VT9-PT | U1 |
| 1 | HV | CustomFootprints:Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal | J3 |
| 1 | Heater | CustomFootprints:Molex_Micro-Fit_3.0_43650-0215_1x02_P3.00mm_Vertical | J4 |
| 1 | High Jack | CustomFootprints:Molex_Micro-Fit_3.0_43650-0415_1x04_P3.00mm_Vertical | J2 |
| 1 | Low Jack | CustomFootprints:Molex_Micro-Fit_3.0_43650-0315_1x03_P3.00mm_Vertical | J1 |
| 1 | Signal | CustomFootprints:Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal | J5 |
| 1 | Vol | CustomFootprints:Molex_Micro-Fit_3.0_43650-0315_1x03_P3.00mm_Vertical | J6 |
The 21 most common of 25 parts.
Questions
How big is the Gain1Module PCB?
It measures 56 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Gain1Module use?
25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gain1Module KiCad files?
From the Dguto9/modular-amp repository on GitHub, at the commit this page was made from: the board is Gain1Module/Gain1Module.kicad_pcb and its schematic EQModule/EQModule.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gain1Module design in my own project?
Its repository states no licence, so its author keeps all rights: ask Dguto9 before reusing the design.
More from Dguto9/modular-amp
5- 2 layers156 × 60 mm
- 2 layers70.5 × 41.9 mm
- 2 layers56 × 60 mm
- 2 layers30 × 38 mm
Similar boards
- 2 layers159.5 × 30 mm
Type f
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
25 parts3kApache-2.0 - 2 layers113.5 × 95.1 mm
Sweep high
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
25 parts2.1k - 2 layers75 × 30 mm
- 2 layers58.4 × 114.3 mm
PicoPedal
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
25 parts915 - 2 layers54 × 15 mm
Xyp gpib
xyphro/UsbGpib
Versatile, cheap and portable USB to GPIB converter (USBTMC class based)
25 parts690MIT - 2 layers50 × 76 mm
- 2 layers237.5 × 102.9 mm
Storage
jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.
25 parts301Unlicense - 2 layers43.3 × 21 mm
