
Leistungskreis
DevOpsOfChaos/smarthome-technikerprojekt
Lokales modulares Smart-Home-System auf ESP32-C3 und Raspberry Pi im Rahmen einer Technikerarbeit.

Lokales modulares Smart-Home-System auf ESP32-C3 und Raspberry Pi im Rahmen einer Technikerarbeit.
Net sen is an open-source printed circuit board by DevOpsOfChaos, from the DevOpsOfChaos/smarthome-technikerprojekt repository on GitHub. It is a 2-layer board of 70.3 × 55.1 mm with 18 parts on 22 nets, routed with 123 tracks and 12 vias.
It is built around the HLK-PM03. Its parts include 7 connectors, 2 capacitors, 2 resistors and 1 fuse. It belongs with the ESP32 and RISC-V boards of this library.
Gemeinsame Steuerplatine für ALLE Relais-Knoten (
net_erlundnet_zrl)
| Datei | Beschreibung |
|---|---|
steuerkreis.kicad_pro | KiCAD 9.0 Projektdatei |
steuerkreis.kicad_sch | Schaltplan (flat schematic) |
steuerkreis.kicad_pcb | PCB-Layout (2-Lagen, 1.6mm) |
mod_Steuerkreis_ESP32.kicad_prl | PCB-Regeln |
steuerkreis.csv | Bauteilliste |
steuerkreis.step | 3D-Modell (STEP-Export) |
Pinbelegung/Pinbelegung.txt | GPIO-Belegung |
production/ | Fertigungsdaten (BOM, Position, Netlist) |
Dieser Steuerkreis wird mit zwei verschiedenen Leistungskreisen kombiniert:
Die Verbindung erfolgt über ein 5-poliges JST-PH-Kabel.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 4K7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | Bridge_I2C | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2 |
| 2 | MountingHole | AAFootprints:Mounting_Hole_M3 | H1, H2 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_6.3x5.8 | C1 |
| 1 | Co_GPIOx1 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | Co_GPIOx2 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | Co_GPIOx3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | Co_x1_5V0 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J6 |
| 1 | Co_x6_3V3 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | Co_x6_GND | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | ESP32-C3_SUPERMINI_TH | ESP32-C3_SUPERMINI_TH:MODULE_ESP32-C3_SUPERMINI_TH | ESP32-C3_SUPERMINI_TH |
| 1 | Fuse | Fuse:Fuseholder_Clip-5x20mm_Bel_FC-203-22_Lateral_P17.80x5.00mm_D1.17mm_Horizontal | F1 |
| 1 | HLK-PM03 | Converter_ACDC:Converter_ACDC_Hi-Link_HLK-PMxx | PS1 |
| 1 | Input_x3 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal | J5 |

DevOpsOfChaos/smarthome-technikerprojekt
Lokales modulares Smart-Home-System auf ESP32-C3 und Raspberry Pi im Rahmen einer Technikerarbeit.

DevOpsOfChaos/smarthome-technikerprojekt
Lokales modulares Smart-Home-System auf ESP32-C3 und Raspberry Pi im Rahmen einer Technikerarbeit.

DevOpsOfChaos/smarthome-technikerprojekt
Lokales modulares Smart-Home-System auf ESP32-C3 und Raspberry Pi im Rahmen einer Technikerarbeit.

DevOpsOfChaos/smarthome-technikerprojekt
Lokales modulares Smart-Home-System auf ESP32-C3 und Raspberry Pi im Rahmen einer Technikerarbeit.

jibrilsharafi/EnergyMe-Home
Smart energy meter capable of monitoring up to 16 channels. Supports MQTT, REST API, Modbus TCP, InfluxDB, AWS IoT Core. Friendly UI and fully open source (PCB, schematics, components, source code)

voltlog/Valve-Actuator
If you are looking for sources of previous revisions (revA, revB, revC) checkout the different branches of this repo.

tomikaa87/esp-thermostat
Smart WiFi thermostat based on the well-known ESP8266 SoC.



Eninspace/triac
This project is based on esp8266 and TRIAC for control power via remote control.


It measures 70.3 × 55.1 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the HLK-PM03. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DevOpsOfChaos/smarthome-technikerprojekt repository on GitHub, at the commit this page was made from: the board is hardware/net_sen/Platine/net_sen.kicad_pcb and its schematic hardware/bat_sen/Basetype/bat_sen/Leistungskreis.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask DevOpsOfChaos before reusing the design.