
Leistungskreis
DevOpsOfChaos/smarthome-technikerprojekt
Lokales modulares Smart-Home-System auf ESP32-C3 und Raspberry Pi im Rahmen einer Technikerarbeit.

Lokales modulares Smart-Home-System auf ESP32-C3 und Raspberry Pi im Rahmen einer Technikerarbeit.
Bat sen is an open-source printed circuit board by DevOpsOfChaos, from the DevOpsOfChaos/smarthome-technikerprojekt repository on GitHub. It is a 2-layer board of 48.9 × 44 mm with 18 parts on 19 nets, routed with 105 tracks and 8 vias.
Its parts include 8 connectors, 4 resistors, 1 capacitor and 1 IC. It belongs with the ESP32 and RISC-V boards of this library.
Gemeinsame Steuerplatine für ALLE Relais-Knoten (
net_erlundnet_zrl)
| Datei | Beschreibung |
|---|---|
steuerkreis.kicad_pro | KiCAD 9.0 Projektdatei |
steuerkreis.kicad_sch | Schaltplan (flat schematic) |
steuerkreis.kicad_pcb | PCB-Layout (2-Lagen, 1.6mm) |
mod_Steuerkreis_ESP32.kicad_prl | PCB-Regeln |
steuerkreis.csv | Bauteilliste |
steuerkreis.step | 3D-Modell (STEP-Export) |
Pinbelegung/Pinbelegung.txt | GPIO-Belegung |
production/ | Fertigungsdaten (BOM, Position, Netlist) |
Dieser Steuerkreis wird mit zwei verschiedenen Leistungskreisen kombiniert:
Die Verbindung erfolgt über ein 5-poliges JST-PH-Kabel.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R5 |
| 2 | 4K7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | Bridge_I2C | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2 |
| 2 | Co_x1_5V0 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J6, J8 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2 |
| 1 | 100uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | Co_GPIOx1 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | Co_GPIOx2 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | Co_GPIOx3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | Co_x2_battery | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J5 |
| 1 | Co_x6_3V0 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | Co_x6_GND | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | ESP32-C3_SUPERMINI_TH | ESP32-C3_SUPERMINI_TH:MODULE_ESP32-C3_SUPERMINI_TH | U1 |

DevOpsOfChaos/smarthome-technikerprojekt
Lokales modulares Smart-Home-System auf ESP32-C3 und Raspberry Pi im Rahmen einer Technikerarbeit.

DevOpsOfChaos/smarthome-technikerprojekt
Lokales modulares Smart-Home-System auf ESP32-C3 und Raspberry Pi im Rahmen einer Technikerarbeit.

DevOpsOfChaos/smarthome-technikerprojekt
Lokales modulares Smart-Home-System auf ESP32-C3 und Raspberry Pi im Rahmen einer Technikerarbeit.

DevOpsOfChaos/smarthome-technikerprojekt
Lokales modulares Smart-Home-System auf ESP32-C3 und Raspberry Pi im Rahmen einer Technikerarbeit.


VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.


Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
It measures 48.9 × 44 mm and has 2 copper layers, 1.6 mm thick.
18 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DevOpsOfChaos/smarthome-technikerprojekt repository on GitHub, at the commit this page was made from: the board is hardware/bat_sen/Basetype/bat_sen/bat_sen.kicad_pcb and its schematic hardware/bat_sen/Basetype/bat_sen/Leistungskreis.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask DevOpsOfChaos before reusing the design.