devisunofficial/Optimus-HubOptimus hub is a USB 2.0 hub which has USB Type-C upstream port and 6 downstream USB Type-A port and one TF-Card reader
Optimus Hub is an open-source printed circuit board by devisunofficial, from the devisunofficial/Optimus-Hub repository on GitHub. It is a 4-layer board of 72.7 × 88.7 mm with 76 parts on 79 nets, routed with 653 tracks and 149 vias.
It is built around the GL850G-HHY60, GL823K-HCY04 and TPD2E001DRYR, with the TPS2552DBVR-1, BX-TYPE-A-MWT4P and ABM3-12.000MHZ-D2Y-T among its other parts. Its parts include 40 capacitors, 11 resistors, 11 ICs, 4 diodes and 2 crystals.
Optimus hub is a USB 2.0 hub which has USB Type-C upstream port and 6 downstream USB Type-A port and one TF-Card reader
Even though there is no Case or anything, here is PCB in 3d View
Here's my PCB! It was made in KiCad.
Schematic : 
PCB Footprint : 
No FIRMWARE ;)
| Name | Use | Quantity | Distributer |
|---|---|---|---|
| GL850G-HHY60 | USB Hub Controller | 2 | JLCPCB |
| PCB | Main-Circuit | 1 | JLCPCB |
| USB-C | Up-Stream Port | 1 | JLCPCB |
| USB-A | Down-Stream Port | 4 | JLCPCB |
| RGB-LED | Optimus Eyes | 2 | JLCPCB |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C5, C7, C11, C13, C16, C18, C19, C20, C21, C29, C30, C31, C32, C34, C37, C39 +1 |
| 6 | 10uF | Capacitor_SMD:C_0603_1608Metric | C6, C15, C17, C27, C28, C33 |
| 6 | 120uF | EasyEDA:CAP-SMD_BD10.0-L10.3-W10.3-LS11.3-FD | C8, C10, C12, C14, C38, C40 |
| 6 | TPD2E001DRYR | EasyEDA:SON-6_L1.5-W1.0-P0.50-BL | U3, U4, U6, U7, U10, U11 |
| 4 | 10k | Resistor_SMD:R_1206_3216Metric | R2, R6, R7, R10 |
| 4 | 22pF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C35, C36 |
| 3 | 100nF | Capacitor_SMD:C_0402_1005Metric | C22, C25, C26 |
| 3 | DownStream-3 | EasyEDA:USB-A-SMD_BX-TYPE-A-MWT4P | USB4, USB6, USB7 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C23, C24 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 680 | Resistor_SMD:R_0805_2012Metric | R1, R11 |
| 2 | Crystal | EasyEDA:OSC-SMD_2P-L5.0-W3.2 | X1, X2 |
| 2 | GL850G-HHY60 | EasyEDA:SSOP-28_L10.2-W5.3-P0.65-LS7.8-BL | U1, U9 |
| 2 | SZYY1615RGB-B 4PIN | EasyEDA:LED-SMD_4P-L1.6-W1.5-TR-1 | LED1, LED3 |
| 1 | 0.1nF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 2N7002 7002 | lcsc_footprints:C8545_SOT-23-3_L2_9-W1_3-P1_90-LS2_4-BR | Q1 |
| 1 | 3k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | DownStream-1 | EasyEDA:USB-A-SMD_BX-TYPE-A-MWT4P | USB1 |
| 1 | DownStream-2 | EasyEDA:USB-A-SMD_BX-TYPE-A-MWT4P | USB3 |
| 1 | DownStream-4 | EasyEDA:USB-A-SMD_BX-TYPE-A-MWT4P | USB5 |
| 1 | GL823K-HCY04 | lcsc_footprints:C284879_SSOP-16_L4_9-W3_9-P0_64-LS6_0-BL | U2 |
| 1 | HX TF PUSH | lcsc_footprints:C5184837_TF-SMD_TF-PUSH | U8 |
| 1 | SMAJ5.0A | EasyEDA:SMA_L4.3-W2.6-LS5.2-RD | D3 |
| 1 | TPS2552DBVR | EasyEDA:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BR | U5 |
| 1 | TYPE-C16PIN | EasyEDA:USB-C-SMD_TYPE-C16PIN | USB2 |
| 1 | USBLC6-2P6 | EasyEDA:SOT-666-6_L1.6-W1.2-P0.50-LS1.6-BR | D1 |
It measures 72.7 × 88.7 mm and has 4 copper layers, 1.6 mm thick.
76 parts, built around the GL850G-HHY60, GL823K-HCY04, TPD2E001DRYR and TPS2552DBVR-1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the devisunofficial/Optimus-Hub repository on GitHub, at the commit this page was made from: the board is Optimus-Hub/Optimus-Hub.kicad_pcb and its schematic Optimus-Hub/Optimus-Hub.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask devisunofficial before reusing the design.
yash-mehta13/4-Port-USB-Hub
A KiCad 8 design for a self-powered 4-port USB hub board. The schematic names a Genesys Logic GL850G hub controller (IC1, value GL850G-HH), one upstream USB-A connector (J5), four downstream USB-A connectors (J1–J4), a…
sire234/VatPoeToUsb
Ein Gerät, das über ein Ethernet-Kabel mit PoE (IEEE 802.3af) gespeist wird und an einem USB-A-Host-Port ein HID-Gerät (Tastatur, Barcode-Scanner, Maus) betreibt. Die HID-Daten stellt die Firmware über Ethernet bereit.
PetteriAimonen/relaymux
Hardware and firmware for a USB connected relay box
pmnlla/greenccd
The original SuzyQable, manufactured by sparkfun, contained a USB hub in order to mount a target CrOS device twice on the host machine:
