Skip to the content
2 layers119.5 × 115 mmElectronicDice, the printed circuit board in 3D

Submission of Devansh Verma (250331) for Electronics Club Secratory Reqruitement task

Size
119.5 × 115 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
37
Pads
70
Tracks, vias
78, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
19 May 2026
Updated
24 May 2026

Overview

ElectronicDice is an open-source printed circuit board by Dev-ansh-V, from the Dev-ansh-V/PCB-Design--Electronic-Dice repository on GitHub. It is a 2-layer board of 119.5 × 115 mm with 21 parts on 37 nets, routed with 78 tracks and 0 vias.

It is built around the ARDUINO UNO R3. Its parts include 7 resistors, 7 diodes, 1 connector and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

Parts

21
QtyValueFootprintReferences
7220Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2, R3, R4, R5, R6, R7
7LEDLED_THT:LED_D5.0mmD1, D2, D3, D4, D5, D6, D7
1Arduino_UNO_R3Module:Arduino_UNO_R3A1
1Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1
1SW_PushButton_Switch_THT:SW_PUSH_6mmSW1

The 17 most common of 21 parts.

Similar boards

  • 2 layers68.8 × 53.6 mmRelatively Universal ROM Programmer, the printed circuit board in 3D

    Relatively Universal ROM Programmer

    AndersBNielsen/Relatively-Universal-ROM-Programmer

    Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.

    149 parts257GPL-3.0
  • 2 layers69.1 × 53.8 mmMotor controller, the printed circuit board in 3D

    Motor controller

    AlanFord/self-balancing-stick

    Dual Axis Reaction Wheel Inverted Pendulum

    25 parts79MIT
  • 2 layers68.6 × 53.3 mmProtogasm Board V2, the printed circuit board in 3D

    Protogasm Board V2

    Edging-Machines/Edging-Machines

    This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.

    14 parts67MIT
  • 2 layers53.8 × 69.6 mmEVSE V2 2, the printed circuit board in 3D

    EVSE V2 2

    PedroCNeves/AC_ChargingStation

    A learning project to create an EV AC Charging station based on an Arduino Uno

    32 parts50
  • 2 layers113.7 × 61 mmArduTester SMD, the printed circuit board in 3D

    ArduTester SMD

    jonsag/arduTester

    An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4

    17 parts14
  • 4 layers65.9 × 52.9 mmMotor shield, the printed circuit board in 3D

    Motor shield

    DCC-EX/EX-MotorShield8874

    Design files for the open source 5A Motor Shield

    114 parts12
  • 4 layers68.6 × 53.3 mm101 PCB, the printed circuit board in 3D

    101 PCB

    ICRS/101

    The all-new open source Robotics 101 course from ICRS. It's specifically designed to be run in hackspaces, after school clubs and university societies.

    89 parts10CC-BY-4.0
  • 2 layers53.3 × 68.3 mmAnac 2040, the printed circuit board in 3D

    Anac 2040

    rallekralle11/Anna2040

    RP2040-based board in the shape of the Arduino uno

    63 parts9

Questions

How big is the ElectronicDice PCB?

It measures 119.5 × 115 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ElectronicDice use?

21 parts, built around the ARDUINO UNO R3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ElectronicDice KiCad files?

From the Dev-ansh-V/PCB-Design--Electronic-Dice repository on GitHub, at the commit this page was made from: the board is ElectronicDice/ElectronicDice.kicad_pcb and its schematic ElectronicDice/ElectronicDice.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ElectronicDice design in my own project?

Its repository states no licence, so its author keeps all rights: ask Dev-ansh-V before reusing the design.