
CLOCK
Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.
NOISE is an open-source printed circuit board by Desval27, from the Desval27/FormantKO repository on GitHub, published under the MIT licence. It is a 2-layer board of 160 × 100 mm with 56 parts on 62 nets, routed with 311 tracks and 6 vias.
Its parts include 20 resistors, 17 connectors, 11 capacitors, 4 ICs and 2 diodes. It belongs with the audio and music boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1k | FormantKO:R_Axial_Horizontal_P500mil | R14, R15, R16, R17 |
| 4 | 470Ω | FormantKO:R_Axial_Horizontal_P500mil | R6, R11, R18, R19 |
| 4 | 47k | FormantKO:R_Axial_Horizontal_P500mil | R1, R9, R10, R13 |
| 4 | µA741C | FormantKO:DIP-8 | IC1, IC2, IC3, IC4 |
| 3 | 470k | FormantKO:R_Axial_Horizontal_P500mil | R3, R7, R8 |
| 3 | GND | FormantKO:Wire_1x01_General | J7, J14, J15 |
| 2 | 10µ | FormantKO:CP_Axial_600 | C10, C11 |
| 2 | 220n | FormantKO:C_Rect_300_400 | C8, C9 |
| 1 | 100k | FormantKO:PanelConnector_1x06 | P1 |
| 1 | 100k | FormantKO:R_Axial_Horizontal_P500mil | R2 |
| 1 | 100µ | FormantKO:CP_Axial_800-1150mil | C7 |
| 1 | 10k | FormantKO:R_Axial_Horizontal_P500mil | R4 |
| 1 | 10k | FormantKO:Potentiometer_Trimmer | P2 |
| 1 | 1N4148 | FormantKO:DUS | D1 |
| 1 | 1µ | FormantKO:CP_Axial_500mil | C2 |
| 1 | 1µ | FormantKO:C_Rect_400_600 | C5 |
| 1 | 22k | FormantKO:R_Axial_Horizontal_P500mil | R20 |
| 1 | 22µ | FormantKO:CP_Axial_600 | C1 |
| 1 | 2M2 | FormantKO:R_Axial_Horizontal_P500mil | R5 |
| 1 | 330n | FormantKO:C_Rect_300_400 | C6 |
| 1 | 47µ | FormantKO:CP_Axial_600-850mil_PinSwap | C3 |
| 1 | 4k7 | FormantKO:R_Axial_Horizontal_P500mil | R12 |
| 1 | 680n | FormantKO:C_Rect_300_400 | C4 |
| 1 | BUS CONNECTOR | FormantKO:CardConnector | J1 |
| 1 | CN | FormantKO:Wire_1x01_General | J5 |
| 1 | CardBracket | FormantKO:CardBracket | MH1 |
| 1 | D2a | FormantKO:Wire_1x01_General | J2 |
| 1 | D2k | FormantKO:Wire_1x01_General | J3 |
| 1 | P1a-1 | FormantKO:Wire_1x01_General | J10 |
| 1 | P1a-2 | FormantKO:Wire_1x01_General | J9 |
| 1 | P1a-3 | FormantKO:Wire_1x01_General | J8 |
| 1 | P1b-1 | FormantKO:Wire_1x01_General | J11 |
| 1 | P1b-2 | FormantKO:Wire_1x01_General | J12 |
| 1 | P1b-3 | FormantKO:Wire_1x01_General | J13 |
| 1 | Panel_LED | FormantKO:PanelConnector_1x02 | D2 |
| 1 | RV | FormantKO:Wire_1x01_General | J6 |
| 1 | TUN | FormantKO:HWS1257 | T1 |
| 1 | WN | FormantKO:Wire_1x01_General | J4 |

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



GEIGEIGEIST/KLOTZ
KLOTZ is 34 keys column-staggered split keyboard. It uses an encoder and three status LEDs on each side.

ergonautkb/one
Ergonaut One is an open-source ergonomic wireless split mechanical keyboard designed by Ergonaut Keyboards.

matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

EnriqueNeyra/Aeroq
An Indoor Air Quality Monitor Powered by ESP32, SCD40, and SEN54
It measures 160 × 100 mm and has 2 copper layers, 1.6 mm thick.
56 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Desval27/FormantKO repository on GitHub, at the commit this page was made from: the board is modules/NOISE/NOISE.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).