
PETER
dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.
BALD is an open-source printed circuit board by dennowiggle, from the dennowiggle/Retro-PETER repository on GitHub, published under the LGPL-2.1 licence. It is a 4-layer board of 102.9 × 49.9 mm with 65 parts on 111 nets, routed with 356 tracks and 123 vias.
It is built around the SN74LVC240ANS, TLV1117LV33DCYR and RC0603FR-0710KL, with the RC0603FR-071KL, LTST-S270KGKT and CC0603KRX7R9BB104 among its other parts. Its parts include 32 resistors, 16 diodes, 6 capacitors, 3 ICs and 1 connector.
Z8S180 On RCBUS Only.
ZORO is an RCBUS board with a Z180 CPU. There is no RAM or ROM memory hosted on the board.


The 'output' directory contains the BOM, netlist, and PDF schematic.
Board design used KiCad 8.0.4.
Change J2 to Adam Tech part number PH2RA-80-UA to reduce insertion force.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R17, R18, R19, R20, R21, R22, R23, R24 |
| 16 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10, R11, R12, R13, R14, R15, R16, R26, R27, R28, R29, R30, R31, R32, R33 |
| 16 | LED_LTST-S270KGKT | WTM_Library:LTST-S270KGKT | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C4, C8 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_DIN965 | H2, H3, H4, H5 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C9 |
| 2 | 74LVC240ANS | Package_SO:SO-20_5.3x12.6mm_P1.27mm | U1, U2 |
| 2 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo_7.5x8mm_SilkScreen | LOGO1, LOGO2 |
| 1 | Conn_02x40_Top_Bottom | WTM_Library:RCBUS_PinHeader_2x40_P2.54mm_Horizontal | J1 |
| 1 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1 |
| 1 | TLV1117LV33DCYR | Package_TO_SOT_SMD:SOT-223 | U4 |

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

dennowiggle/Z8S180-WTM
Repository for sharing Z8S180-WTM design changes only. A private repository.

saikhamhein/benchswitch-usb-dut-hub
BenchSwitch USB DUT Hub: a four-port USB 2.0 hardware development prototype with KiCad design sources, BOM, manufacturing files, and bring-up documentation.

iandchasse/silkscreen-pcb
Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.


festlv/rioctrl-hw
Hardware design for modular CNC controller


aliaksei-lameyka/ENKU-Base-reader
Open enku-mainboard-r0.1.kicadpro with KiCad10.0.7. Matching PCB/root schematic and power.kicadsch, mcuio.kicadsch, epdhv.kicadsch, connectors.kicadsch are canonical.

It measures 102.9 × 49.9 mm and has 4 copper layers, 1.6 mm thick.
65 parts, built around the SN74LVC240ANS, TLV1117LV33DCYR, RC0603FR-0710KL and RC0603FR-071KL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dennowiggle/Retro-PETER repository on GitHub, at the commit this page was made from: the board is Hardware/BALD/BALD.kicad_pcb and its schematic Hardware/Analyzer/Analyzer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the LGPL-2.1 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).