
2067-Z8S180
dennowiggle/Z8S180-WTM
Repository for sharing Z8S180-WTM design changes only. A private repository.

Repository for sharing Z8S180-WTM design changes only. A private repository.
2067-Z8S180 is an open-source printed circuit board by dennowiggle, from the dennowiggle/Z8S180-WTM repository on GitHub, published under the LGPL-2.1 licence. It is a 4-layer board of 85.3 × 78 mm with 53 parts on 123 nets, routed with 875 tracks and 318 vias.
It is built around the Z8S18020FSG, SN74LVC240ANS and IS61WV10248EDBLL-10TLI, with the RC0805JR-071KL, LTST-C170KGKT and CL21A106KOQNNNG among its other parts. Its parts include 20 resistors, 9 capacitors, 8 diodes, 6 connectors and 3 ICs.
Z8S180 Breakout Board

| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 33R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10 |
| 8 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R101, R103, R104, R105, R106, R107, R108, R109 |
| 8 | LTST-C170KGKT | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D101, D103, D104, D105, D106, D107, D108, D109 |
| 5 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C101, C106, C108 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C105, C107 |
| 4 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J101, J102, J103, J104 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_DIN965 | H1, H2, H3, H4 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R14 |
| 2 | MMUN2211LT1G | Package_TO_SOT_SMD:SOT-23-3 | Q1, Q4 |
| 1 | 74LVC240ANS | Package_SO:SO-20_5.3x12.6mm_P1.27mm | U102 |
| 1 | Conn_02x12_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x12_P2.54mm_Vertical | J1 |
| 1 | Conn_02x30_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x30_P2.54mm_Vertical | J2 |
| 1 | IS61WV10248EDBLL-10TLI | Package_SO:TSOP-II-44_10.16x18.41mm_P0.8mm | U2 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo2_9.8x8mm_SilkScreen | LOGO1 |
| 1 | Z8S18020FSG | WTM_Library:PQFP-80_14x20mm_P0.8mm | U1 |

dennowiggle/Z8S180-WTM
Repository for sharing Z8S180-WTM design changes only. A private repository.

dennowiggle/ESP32_Interface
Facilitate learning the Z80 Retro! hardware and software.


dennowiggle/FLEADiP
FLEADiP is a compatiable add-on board for the Z80 Retro! project

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

eigenco/frankenpi
This is an experimental project to connect Raspberry Pi with the help of cheap Cyclone IV FPGA board to 8-bit ISA bus to act as multiple different devices.


roberto314/Unicomp3
A modular 8-bit Computer able to recreate (nearly) every Retro computer of the late 70s to mid 80s.

mkmielke/LIV3F_mikroBUS
The KiCAD project files for a mikroBUS add-on board featuring the Teseo-LIV3F GNSS module.
It measures 85.3 × 78 mm and has 4 copper layers, 1.6 mm thick.
53 parts, built around the Z8S18020FSG, SN74LVC240ANS, IS61WV10248EDBLL-10TLI and RC0805JR-071KL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dennowiggle/Z8S180-WTM repository on GitHub, at the commit this page was made from: the board is kicad/2067-Z8S180-WTM2-1/2067-Z8S180.kicad_pcb and its schematic kicad/2067-Z8S180-JB2/2067-Z8S180.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the LGPL-2.1 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).