
2067-Z8S180
dennowiggle/Z8S180-WTM
Repository for sharing Z8S180-WTM design changes only. A private repository.

Z8S180 Breakout Board
2067-Z8S180 is an open-source printed circuit board by johnwinans, from the johnwinans/2067-Z8S180 repository on GitHub. It is a 4-layer board of 70 × 78 mm with 13 parts on 94 nets, routed with 569 tracks and 218 vias.
It is built around the Z8S18020FSG and IS61WV10248EDBLL-10TLI. Its parts include 4 capacitors, 2 ICs and 2 connectors.
Z8S180 Breakout Board

| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 2 | .1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C4 |
| 1 | Conn_02x12_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x12_P2.54mm_Vertical | J1 |
| 1 | Conn_02x30_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x30_P2.54mm_Vertical | J2 |
| 1 | IS61WV10248EDBLL-10TLI | Package_SO:TSOP-II-44_10.16x18.41mm_P0.8mm | U2 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo2_9.8x8mm_SilkScreen | LOGO1 |
| 1 | Z8S18020FSG | jb-footprint:PQFP-80_14x20mm_P0.8mm | U1 |

dennowiggle/Z8S180-WTM
Repository for sharing Z8S180-WTM design changes only. A private repository.

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

eigenco/frankenpi
This is an experimental project to connect Raspberry Pi with the help of cheap Cyclone IV FPGA board to 8-bit ISA bus to act as multiple different devices.


roberto314/Unicomp3
A modular 8-bit Computer able to recreate (nearly) every Retro computer of the late 70s to mid 80s.

MicroCoreLabs/Projects
Ted Fried's MicroCore Labs Projects - FPGA CPU cores and emulators for the 8088, 8086, 8051, 6502, 68000, Z80, Risc-V, and also Typewriter and EPROM Emulator projects.

AzonInc/Doorman
ESP32-S3 based Intercom Gateway (TCS / Koch / Niko / Scantron / Analogue Systems)

loxodes/vna
Under development open hardware microwave vector network analyzer
It measures 70 × 78 mm and has 4 copper layers, 1.6 mm thick.
13 parts, built around the Z8S18020FSG and IS61WV10248EDBLL-10TLI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the johnwinans/2067-Z8S180 repository on GitHub, at the commit this page was made from: the board is 2067-Z8S180.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask johnwinans before reusing the design.