
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
!!!Do not use the software / circuit / device while driving!!!
GpsRouteTracker is an open-source printed circuit board by Dennis650, from the Dennis650/GpsRouteTracker repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 39.4 × 60.5 mm with 15 parts on 34 nets, routed with 128 tracks and 0 vias.
It is built around the LM1117-3.3. Its parts include 6 connectors, 5 resistors and 2 ICs.
!!!EXPERIMENTAL SOFTWARE!!!
!!!EXPERIMENTAL ELECTRICAL CIRCUIT!!!
!!!USE AT YOUR OWN RISK!!!
!!!Do not use the software / circuit / device while driving!!!
GpsRouteTracker in action
Bluetooth (BLE) - Gps-data and edit destination and home location with your smartphone
![]()
connect your ESP32 with USB to your Computer.
You can edit or ad you own bike to platformio/include/bikes. Copy a existing bike and modify the settings. Add your bike also to platformio/platformio.ini
platformio run -e Prototype --target upload
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R2, R3, R4, R5 |
| 1 | Buttons | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J6 |
| 1 | GPS | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | LM1117-3.3 | Package_TO_SOT_THT:TO-220F-3_Vertical | U2 |
| 1 | Lolin32 | Lolin32:Lolin32 | U1 |
| 1 | OKI-78SR-5_1.5-W36-C | Converter_DCDC:Converter_DCDC_muRata_OKI-78SR_Vertical | OKI |
| 1 | OLED | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J5 |
| 1 | OneWire | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Power | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | SD | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
The 14 most common of 15 parts.

UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix


doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!

plinkysynth/plinky_public
a public release of the plinky sw and hw

eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32


It measures 39.4 × 60.5 mm and has 2 copper layers, 1.6 mm thick.
15 parts, built around the LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Dennis650/GpsRouteTracker repository on GitHub, at the commit this page was made from: the board is kicad/GpsRouteTracker.kicad_pcb and its schematic kicad/GpsRouteTracker.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).