4 layers101.8 × 67.8 mm
2 layers
CCBR Board v2
defGonzaloR/ESRA-RUDynamics-BoardV3 of a power distribution board prototype, implementing signal filtering for Jetson implementation and overal signal integrity.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 11
- Pads
- 73
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 May 2026
- Updated
- 16 Sep 2026
Overview
CCBR Board v2 is an open-source printed circuit board by defGonzaloR, from the defGonzaloR/ESRA-RUDynamics-Board repository on GitHub. It is a 2-layer board with 26 parts on 11 nets.
It is built around the JTD1548S12 and PTVS26VZ1USK. Its parts include 9 capacitors, 6 connectors, 5 fuses, 1 IC and 1 diode.
Main components
2README
README.mdESRA-RUDynamics-Board
This is V3 of the Rutgers Dynamics power distribution board, building and heavily based off of the original board designed by the Columbia University Robotics team. This is also my first power distribution board design.
I used a board-mounted XT90 connector to attach to the Lipo batteries. For circuit protection, I included fuse holders that connect to each output for the legs, as well as essential filtering for high-noise signals. At the bottom is a buck converter, to step down the 24V to 12V for powering the Jetson Orin Nano.
Due to funding, this board was discontinued, but I'm excited to apply skills and theory learned from this design to future applications.
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1 uF | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C1, C3, C5, C7 |
| 4 | 470 uF | Capacitor_THT:CP_Radial_D12.5mm_P5.00mm | C2, C4, C6, C8 |
| 4 | Conn_01x02_Socket | CCBR:AMASS_XT30PW_2_2_-M.G.B | J2, J3, J4, J5 |
| 4 | Fuse | CCBR:3581 | F1, F2, F3, F4 |
| 1 | 0.47 uH | Inductor_THT:L_Radial_D18.0mm_P10.00mm | L1 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D12.5mm_P5.00mm | C10 |
| 1 | Conn_01x02_Pin | CCBR:AMASS_XT90PW-M | J1 |
| 1 | Fuse | CCBR:FUSE_3557-2 | F5 |
| 1 | JTD1548S12 | Converter_DCDC:Converter_DCDC_XP_POWER_JTDxxxxxxx_THT | U1 |
| 1 | PTVS26VZ1USK | Diode_SMD:Nexperia_DSN1608-2_1.6x0.8mm | D1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J6 |
The 23 most common of 26 parts.
Similar boards
- 2 layers70 × 90 mm
CarBoard Raspberry PiPico
Maczla/Raspberry_Pi_Pico_Automotive_Interface
Automotive interface board for Raspberry Pi Pico with 12 V power protection, vehicle signal inputs, SWC analog inputs and configurable PWM output.
72 partsMIT - 4 layers24.8 × 39.8 mm
- 2 layers57.3 × 19 mm
- 2 layers98 × 59.5 mm
MCP23017 PCB
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
26 parts915 - 2 layers142.9 × 98.5 mm
- 2 layers86.1 × 86.1 mm
- 2 layers103.8 × 50 mm
Galagino pcb set
harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32
26 parts558
Questions
What parts does the CCBR Board v2 use?
26 parts, built around the JTD1548S12 and PTVS26VZ1USK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CCBR Board v2 KiCad files?
From the defGonzaloR/ESRA-RUDynamics-Board repository on GitHub, at the commit this page was made from: the board is CCBR_Board_v2.kicad_pcb and its schematic CCBR_Board_v2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CCBR Board v2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask defGonzaloR before reusing the design.