Skip to the content
2 layers27.3 × 24 mmUsb breakout, the printed circuit board in 3D

Usb breakout

decency131/tau2

tau is a pitch-to-MIDI instrument pedal

Size
27.3 × 24 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
8
Pads
24
Tracks, vias
28, 0
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
21 Feb 2026
Updated
24 May 2026

Overview

Usb breakout is an open-source printed circuit board by decency131, from the decency131/tau repository on GitHub, published under the WTFPL licence. It is a 2-layer board of 27.3 × 24 mm with 9 parts on 8 nets, routed with 28 tracks and 0 vias.

It is built around the USBLC6-2SC6. Its parts include 2 resistors, 2 connectors and 1 IC. It belongs with the audio and music and interfaces and adapters boards of this library.

Main components

1

README

README.md

tau

Rust

tau is a pedal that converts musical instrument input into USB MIDI notes.

It is based on daisy seed by Electrosmith and daisy-embassy (which is based on embassy, an embedded async runtime).

Current main branch contains firmware for the first revision hardware. Firmware for the second revision can be found on the rev2-attempt branch and is mostly finished, apart from optimization work currently present on the main branch. Second revision hardware needs some adjustments and fixes that are planned to be implemented in the future.

Current features

  • Real-time pitch detection from instrument input
  • USB MIDI output
  • MIDI note on/off generation based on detected pitch
  • Channel selection using an expression pedal
  • Basic MIDI looper functionality
  • Footswitch control:
    • SW1: record / play / overdub
    • SW2 short press: pause / resume
    • SW2 long press: clear loop
  • Channel indicator LEDs

How it works

The audio input is received from the Daisy Seed audio codec. Audio frames are copied from the audio callback into a separate pitch detection task, so heavier DSP work does not run directly inside the audio callback.

Pitch detection is done using a no-std YIN implementation. Detected frequencies are converted to MIDI notes. A small smoothing layer is used to reduce note flicker and avoid fast retriggering when the detected note is unstable.

MIDI events are sent over USB MIDI. The looper records MIDI events together with their timing and MIDI channel, so previously recorded loops keep playing on the original channel even if the expression pedal changes the current channel later.

Build

zsh
cargo build --features=seed_1_2 --release

Adjust to your seed revision.

Flash/run

The recommended way is to use a debug probe (such as ST-LINK v3 minie), and run

zsh
cargo run --features=seed_1_2 --release

or

zsh
DEFMT_LOG=warn cargo run --features=seed_1_2 --release

for less logging overhead.

Electrosmith have, however, recently made their bootloader open source, so you could try using that, or their online flasher.

[!NOTE] This project is released under the WTFPL license.

Parts

9
QtyValueFootprintReferences
4MountingHole_2.2mm_M2MountingHole:MountingHole_2.2mm_M2M1, M2, M3, M4
2330Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2
1Conn_01x04Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_VerticalJ2
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U1
1USB_BConnector_USB:USB_B_OST_USB-B1HSxx_HorizontalJ1

More from decency131/tau

2
  • 2 layers87 × 45 mmTau v2, the printed circuit board in 3D

    Tau v2

    decency131/tau

    tau is a pitch-to-MIDI instrument pedal

    69 parts2WTFPL
  • 2 layers100 × 70 mmTau v1, the printed circuit board in 3D

    Tau v1

    decency131/tau

    tau is a pitch-to-MIDI instrument pedal

    59 parts2WTFPL

Similar boards

  • 4 layers16.9 × 119.4 mmOrbit, the printed circuit board in 3D

    Orbit

    earthtojake/text-to-cad

    Design physical products with AI

    182 parts26kMIT
  • 2 layers290.1 × 130 mmPro V2, the printed circuit board in 3D

    Pro V2

    kata0510/Lily58

    6×4+4keys column-staggered split keyboard.

    312 parts2.3k
  • 4 layers95 × 55.5 mmEinkPDA keyboard, the printed circuit board in 3D

    EinkPDA keyboard

    TalismanDesign/PocketMage_PDA

    An E-Ink PDA device using the ESP32 S3.

    137 parts2kApache-2.0
  • 4 layers299 × 127 mmLaunch, the printed circuit board in 3D

    Launch

    system76/launch

    System76 Launch Configurable Keyboard

    385 parts1.4kGPL-3.0
  • 2 layers42 × 67 mmLalboard, the printed circuit board in 3D

    Lalboard

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    65 parts993
  • 2 layers134 × 88 mmTulipcc, the printed circuit board in 3D

    Tulipcc

    shorepine/tulipcc

    The Tulip Creative Computer and AMYboard - portable Python synthesizers

    103 parts978
  • 4 layers70.8 × 108 mmCastor and Pollux, the printed circuit board in 3D

    Castor and Pollux

    wntrblm/Castor_and_Pollux

    A Juno-inspired dual oscillator

    235 parts587
  • 4 layers28.2 × 26.1 mmDongleHiderPlus PCB, the printed circuit board in 3D

    DongleHiderPlus PCB

    LeoDJ/FW-EC-DongleHiderPlus

    Framework Expansion Card that includes a USB hub to hide a bare dongle inside and still have a USB-A port externally

    23 parts497CERN-OHL-W-2.0

Questions

How big is the Usb breakout PCB?

It measures 27.3 × 24 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Usb breakout use?

9 parts, built around the USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Usb breakout KiCad files?

From the decency131/tau repository on GitHub, at the commit this page was made from: the board is hw/tau_v2/usb_breakout/usb_breakout.kicad_pcb and its schematic hw/tau_v1/tau_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Usb breakout design in my own project?

Its repository publishes it under the WTFPL licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).