
Voron Klipper Board
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

Breakout board for a Schrank / TE Connectivity SR2M Form A + B force guided relay
SafetyRelay is an open-source printed circuit board by dead-lock-ed, from the dead-lock-ed/SR2M_breakout repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 56 × 38 mm with 15 parts on 11 nets, routed with 16 tracks and 106 vias.
It is built around the BAT43. Its parts include 5 connectors, 2 diodes, 1 resistor and 1 switch.
Breakout board for a Schrank / TE Connectivity SR2M Form A + B force guided relay
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H1, H2, H3, H4 |
| 4 | Screw_Terminal_01x03 | TerminalBlock_RND:TerminalBlock_RND_205-00046_1x03_P5.00mm_Horizontal | J2, J3, J4, J5 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | BAT43 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | Conn_01x02_Socket | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | LED | LED_THT:LED_D3.0mm | D2 |
| 1 | SCHRACK SR2M form A + form B | DIY:Relay_Schrack-SR2M-FormA+B | K1 |
The 13 most common of 15 parts.

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group



ravinrabbid/DonCon2040
RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers

Testbild-synth/HAGIWO_arduino_oscillator
4HP through hole version of the HAGIWO FM/additive/chord oscillator with mode switch and gain input.

Testbild-synth/Hagiwo_009_030_sequencer
A through-hole PCB conversion of HAGIWO's 6 channel eurorack gate sequencer. Includes Gerbers, Code and building instructions.

bvarner/pi485
An open-source TTL UART <-> RS485 converter, intended for a Raspberry Pi or Arduino

Testbild-synth/HAGIWO-029-033-Eurorack-quantizer
Through hole PCB version of the HAGIWO Dual Quantizer/SH101 Sequencer Eurorack Module-.
It measures 56 × 38 mm and has 2 copper layers, 1.6 mm thick.
15 parts, built around the BAT43. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dead-lock-ed/SR2M_breakout repository on GitHub, at the commit this page was made from: the board is SafetyRelay/SafetyRelay.kicad_pcb and its schematic SafetyRelay/SafetyRelay.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).