2 layers174 × 58 mm
Breakout 112pin Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
42 parts1.2k
2 layers66 × 50 mm
FastNerfController
DDeGonge/FastHeckinNerf19Nerf gun go brapp but like way more than you'd think
- Size
- 66 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 69
- Pads
- 187
- Tracks, vias
- 169, 16
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 25 Nov 2020
- Updated
- 2 Jul 2024
Overview
FastNerfController is an open-source printed circuit board by DDeGonge, from the DDeGonge/FastHeckinNerf repository on GitHub, published under the MIT licence. It is a 2-layer board of 66 × 50 mm with 42 parts on 69 nets, routed with 169 tracks and 16 vias.
Its parts include 17 connectors, 12 resistors, 9 capacitors, 2 transistors and 1 IC. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
README
README.mdParts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7, J8, J16, J17, J18, J19 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R6, R7, R8, R9, R10 |
| 4 | 100 | Resistor_SMD:R_0603_1608Metric | R1, R2, R11, R12 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3, C4, C5, C6 |
| 4 | Conn_01x01 | MountingHole:MountingHole_2.2mm_M2_Pad_Via | J5, J6, J11, J12 |
| 4 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J1, J2, J3, J4 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C9, C10, C11 |
| 2 | 2.2k | Resistor_SMD:R_0603_1608Metric | R13, R14 |
| 2 | 47uF | Capacitor_SMD:CP_Elec_6.3x5.8 | C1, C2 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J13, J14 |
| 2 | DMG7430LFG-7 | SamacSys_Parts:POWERDI-3333-8 | Q1, Q2 |
| 1 | 90k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J15 |
| 1 | LOGO | .pretty:nerfdrive | G*** |
| 1 | Teensy4.0 | teensy.pretty-master:Teensy40_SMT | U2 |
Questions
How big is the FastNerfController PCB?
It measures 66 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FastNerfController use?
42 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FastNerfController KiCad files?
From the DDeGonge/FastHeckinNerf repository on GitHub, at the commit this page was made from: the board is pcb/FastNerfController/FastNerfController.kicad_pcb and its schematic pcb/FastNerfController/FastNerfController.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FastNerfController design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers30 × 50 mm
- 2 layers139.7 × 64.8 mm
Sprig console
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
42 parts1.1kMIT - 2 layers90.5 × 50 mm
Main control board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
42 parts1.1k - 2 layers67.6 × 30.5 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
42 parts1kGPL-3.0 - 2 layers190 × 80 mm
Pcb shield
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
42 parts915 - 2 layers98 × 80 mm
- 2 layers50.8 × 90.4 mm
