Skip to the content
2 layers105 × 130 mmThirtyinone badge, the printed circuit board in 3D

Thirtyinone badge

dczia/thirtyinone10

defcon 30 30-in-One badge

Size
105 × 130 mm
Copper layers
2
Thickness
1.6 mm
Parts
130
Nets
118
Pads
385
Tracks, vias
583, 43
Pours
13
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
21 Jul 2022
Updated
11 Sep 2022

Overview

Thirtyinone badge is an open-source printed circuit board by dczia, from the dczia/thirtyinone repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 105 × 130 mm with 130 parts on 118 nets, routed with 583 tracks and 43 vias.

It is built around the ATSAMD21E15B-AU, MIC5219-3.6YM5-TD and USB3140-30-0170-1-C. Its parts include 76 connectors, 17 capacitors, 11 resistors, 8 diodes and 3 transistors. It belongs with the lEDs and displays boards and the SAM D and SAM boards of this library.

Main components

3

README

README.md

thirtyinone

defcon 30 30-in-One badge

This Is The Video You Are Looking For

For those who don't like videos, here is a reasonable ordering of adding components:

  • Pins (broken out all at once or a few at a time
  • OLED Screen - top left, for pins
  • Switches (next to battery, under keycaps hope)
  • RGB LED - to the left of the other LEDS
  • Speaker bottom right, on top of the spot of tape. Polarity does not matter
  • Battery case (big blank spot, bottom left)
  • Key base (top right-should be obvious)
  • Transformer (note THIS one is directional-the P side should line up with the P on the board)
  • Potentiometer (next to the key base)
  • Key Cap

Parts

130
QtyValueFootprintReferences
56Conn_01x02_FemaleConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ105, J106, J107, J108, J109, J110, J111, J112, J113, J114, J115, J116, J117, J118, J119, J120 +40
9Conn_01x03_FemaleConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ159, J160, J161, J162, J163, J164, J165, J166, J167
40.1uFCapacitor_SMD:C_0603_1608MetricC5, C7, C115, C116
4SpareConnector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ172, J173, J174, J175
3100Resistor_SMD:R_0603_1608MetricR108, R109, R110
310uFCapacitor_SMD:C_0603_1608MetricC3, C4, C114
3D_SchottkyDiode_SMD:D_SMAD1, D2, D5
227RResistor_SMD:R_0603_1608MetricR1, R2
23904Package_TO_SOT_SMD:SOT-23Q101, Q102
247pFCapacitor_SMD:C_0603_1608MetricC9, C10
2D_Schottky_Dual_Series_ACK_ParallelPackage_TO_SOT_SMD:SOT-23D3, D4
2LEDLED_SMD:LED_0805_2012MetricD102, D103
1100kResistor_SMD:R_0603_1608MetricR103
1100uFCapacitor_SMD:CP_Elec_5x5.4C112
110kResistor_SMD:R_0603_1608MetricR104
110nFCapacitor_SMD:C_0603_1608MetricC118
11kResistor_SMD:R_0603_1608MetricR106
11uFCapacitor_SMD:C_0603_1608MetricC8
12.2uFCapacitor_SMD:C_0805_2012MetricC1
122uFCapacitor_SMD:C_0805_2012MetricC113
133nFCapacitor_SMD:C_0603_1608MetricC117
13906Package_TO_SOT_SMD:SOT-23Q103
1470pFCapacitor_SMD:C_0805_2012MetricC2
1470uFCapacitor_SMD:CP_Elec_8x10.5C111
15.6kResistor_SMD:R_0603_1608MetricR105
150kPotentiometer_THT:Potentiometer_Alps_RK09K_Single_VerticalRV101
1680Resistor_SMD:R_0603_1608MetricR107
1ATSAMD21E15B-AUPackage_QFP:TQFP-32_7x7mm_P0.8mmU2
1BatteryBattery:BatteryHolder_Keystone_2479_3xAAABT1
1Battery +Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ170
1Battery -Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ171
1Bootloadlib_fp:SW_Push_1P1T_NO_CK_PTS526BOOT1
1CdSlib_fp:CdS CellR111
1LED_RGBLED_SMD:LED_RGB_PLCC-6D104
1LOGOlib_fp:BackSilk-TextG***
1LOGOlib_fp:FrontSilkG***
1LOGOlib_fp:BackSilk-BarsG***
1MIC5219-3.6YM5Package_TO_SOT_SMD:SOT-23-5U1
1OLEDConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ3
1PowerButton_Switch_THT:SW_E-Switch_EG1271_DPDTSW1
1RXTestPoint:TestPoint_Pad_1.5x1.5mmTP1
1SWDlib_fp:PinHeader_2x05_P1.27mm_Vertical_SneakyJ1
1SW_Pushlib_fp:CHERRY_SMDLED_100HSW104
1SW_SPSTButton_Switch_THT:SW_E-Switch_EG1271_DPDTSW103
1Speakerlib_fp:SpeakerLS101
1TXTestPoint:TestPoint_Pad_1.5x1.5mmTP2
1TagConnectTag-Connect:TC2050-NL_SMALLJ2
1Transformerlib_fp:42TL TransformerT101
1USB3140-30-0170-1-Clib_fp:USB31403001701CJ4
1uC InterfaceConnector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_VerticalJ5

Similar boards

  • 2 layers25 × 25 mmSmallEncoder, the printed circuit board in 3D

    SmallEncoder

    DDeGonge/OS-ARM

    This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…

    17 parts498MIT
  • 4 layers58 × 18 mmUpm, the printed circuit board in 3D

    Upm

    jonasblixt/upm

    USB Power monitor

    72 parts46
  • 4 layers77.8 × 56.2 mmMini ble, the printed circuit board in 3D

    Mini ble

    mooltipass/minible_hw

    Repository for the Mini BLE Hardware

    176 parts23MIT
  • 4 layers70 × 30 mmUsb led controller, the printed circuit board in 3D

    Usb led controller

    kcuzner/usb-led-controller

    This is an LED controller for the lights that came with my In-Win A1 Mini-ITX Tower. It came with a simple 12V RGB LED strip, rather than the now-standard WS2812 addressable LED strips that are so common in today's PCs.

    115 parts2
  • 2 layers45 × 105 mmBatteryTester, the printed circuit board in 3D

    BatteryTester

    WPI-HPRC/batteryTester

    CAD and Code for a custom battery load tester for characterizing batteries used by WPI HPRC.

    46 parts
  • 2 layers100 × 100 mmESP drone, the printed circuit board in 3D

    ESP drone

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    130 parts915
  • 2 layers99.5 × 90.5 mmMRR ESPA, the printed circuit board in 3D

    MRR ESPA

    maplerainresearch/MRR_ESPA

    A basic 3D printer control board based on ESP32

    130 parts59
  • 2 layers42 × 48 mmKERISE, the printed circuit board in 3D

    KERISE

    kerikun11/micromouse-kerise-v3

    MicroMouse KERISE v3

    130 parts32

Questions

How big is the Thirtyinone badge PCB?

It measures 105 × 130 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Thirtyinone badge use?

130 parts, built around the ATSAMD21E15B-AU, MIC5219-3.6YM5-TD and USB3140-30-0170-1-C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Thirtyinone badge KiCad files?

From the dczia/thirtyinone repository on GitHub, at the commit this page was made from: the board is Hardware/badge/thirtyinone-badge.kicad_pcb and its schematic Hardware/badge/circuits.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Thirtyinone badge design in my own project?

Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).