
Nes umd
db-electronics/umd-nes-adapter-kicad
NES cartridge adapter for the Universal Mega Dumper

Commodore 64 UMD Cartridge Adapter
C64-umd is an open-source printed circuit board by db-electronics, from the db-electronics/umd-c64-adapter-kicad repository on GitHub. It is a 2-layer board of 20.3 × 83.8 mm with 10 parts on 42 nets, routed with 595 tracks and 28 vias.
It is built around the 0.1UF 50V 5*11, BAT54A and SMMBT3904LT1G-HXY. Its parts include 3 resistors, 2 connectors, 1 capacitor, 1 IC and 1 diode. It belongs with the retro computing and games boards of this library.
Copyright: René Richard
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.
You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions
This KiCad project contains the Commodore 64 cartridge adapter for the Universal Mega Dumper.
Each UMD adapter contains a serial shift register with an 8bit ID.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10.0k | db-smt:0603 | R101, R102, R103 |
| 1 | 0.1uF/50V | db-smt:0603 | C101 |
| 1 | BAT54A | db-smt:SOT23 | D101 |
| 1 | C64-CONN | db-thparts:C64-CONN | CON101 |
| 1 | LOGO | db-artwork:oshw-logo_5mm | G*** |
| 1 | MC74HC589ADTR2G | db-smt:TSSOP-16 | U101 |
| 1 | SMMBT3904LT1G | db-smt:SOT23 | Q101 |
| 1 | UMD-CONN | db-thparts:UMD-CONN-DIP64 | CON102 |

db-electronics/umd-nes-adapter-kicad
NES cartridge adapter for the Universal Mega Dumper


M17-Project/Module_17
M17 modem board for 9600-baud capable radios

ts-manuel/iMX6-Demo-Board
Demo board for the i.MX6ULL Single-Core Processor with Arm Cortex-A7 Core

RIVeR-Lab/BOOST
Multi-Agent Mission Concept for Battery Optimized Onsite Swapping Technology (BOOST)

01binary/str1ker
A human-scale mech integrated with Robot Operating System

MycroftAI/hardware-mycroft-mark-II
Mycroft's Mark II Rpi mechanical, electrical and industrial designs
It measures 20.3 × 83.8 mm and has 2 copper layers, 1.6 mm thick.
10 parts, built around the 0.1UF 50V 5*11, BAT54A and SMMBT3904LT1G-HXY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the db-electronics/umd-c64-adapter-kicad repository on GitHub, at the commit this page was made from: the board is c64-umd/c64-umd.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask db-electronics before reusing the design.