2 layers68.8 × 53.6 mm
Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
149 parts257GPL-3.0
2 layers
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 48
- Pads
- 143
- Tracks, vias
- 392, 7
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 22 Apr 2025
- Updated
- 7 Jun 2025
Overview
Pcb 1 is an open-source printed circuit board by davinmln, from the davinmln/Smart-Parking repository on GitHub. It is a 2-layer board with 42 parts on 48 nets, routed with 392 tracks and 7 vias.
It is built around the ARDUINO UNO R3. Its parts include 17 resistors, 16 connectors, 6 transistors and 2 capacitors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
Readme.md🛜 SMART PARKING
Support By :
- Dosen Pengampu : Akhmad Hendriawan ST, MT
- Mata Kuliah : Workshop Mikrokontroller
- Program Studi : D3 Teknik Elektronika
- Institusi : Politeknik Elektronika Negeri Surabaya ( PENS )
👥 EasyPark Team Member
| Nama | Nrp | Jobdesk |
|---|---|---|
| Davin Maulana Ardana | 2123500002 | Project Manager |
| Achmad Rafi Mauliddani | 2123500006 | Hardware |
| Dodot Made Kurnia | 2123500015 | UI/UX Designer |
| Andika Jalanidi | 2123500017 | Programmer |
| Ilham Dwi Sulistiawan | 2123500018 | 3D Designer |
| Nur Roykhan Muhammad | 2123500024 | Hardware |
Deskripsi Projek
Sistem Smart Parking adalah solusi berbasis teknologi untuk mempermudah pencarian tempat parkir di area umum, seperti apartemen, pusat perbelanjaan, dan area publik lainnya. Sistem ini menggunakan sensor dan teknologi IoT untuk mendeteksi ketersediaan parkir secara real-time dan memberikan informasi langsung kepada pengguna. Tujuan utama proyek ini adalah untuk mengurangi waktu yang dihabiskan pengemudi dalam mencari tempat parkir dan mengoptimalkan penggunaan lahan parkir yang ada. Sistem ini tidak hanya memberikan kenyamanan bagi pengguna dengan cara yang efisien dan cepat, tetapi juga membantu pengelola parkir dalam memonitor kapasitas dan pendapatan parkir secara otomatis.
Tujuan Proyek
- Menyediakan solusi parkir yang efisien dan modern untuk mengurangi waktu pencarian tempat parkir oleh pengguna.
- Mengurangi kemacetan di area parkir akibat kendaraan yang berkeliling mencari slot kosong.
- Memberikan informasi ketersediaan tempat parkir secara akurat kepada pengguna.
Komponen
| Nama Komponen | Kegunaan |
|---|---|
| Limit Swich | Untuk mengetahui di bagian mana slot parkir yang kosong |
| Infrared Sensor | Untuk mendeteksi apakah mobil sudah melewati pintu parkir |
| RFID | Sebagai akses keluar dan masuk kendaraan |
| Servo | Untuk membuka dan menutup pintu masuk |
| Arduino Uno | Sebagai mikrokontroler yang akam di gunakan |
| Lcd Dislay 16x2 | Untuk menampilkan slot kosong di parkiran di pintu masuk |
Blok Diagram Sistem
Design PCB
3D Design Parking Slot
Link Thingiverse 3D Design
🔗Teruskan ke website Thingverse
UI/UX Design
Simulasi Wokwi
Link Simulasi Wokwi
Video Iklan
https://github.com/user-attachments/assets/c66144eb-d369-47d5-b7e9-3379c96ada36
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | R_US | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R4, R5, R6, R7, R8, R10, R11, R12, R13, R14, R15, R16, R17 +1 |
| 8 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4_IR_IN1, J5_IR_OUT1, J6_IR_parkir1, J7_IR_parkir1, J8_IR_parkir1, J12_IR_Out1, J12_Servo_in1, J13_Servo_out1 |
| 6 | BC818 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 3 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1_LMT_parkir1, J2V_LMT_parkir1, J3V_LMT_parkir1 |
| 2 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J10_LED_Sw1, J11_LED_Ir1 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | C_Polarized_US | Capacitor_THT:CP_Radial_D10.0mm_P3.80mm | C2 |
| 1 | C_Small | Capacitor_THT:C_Disc_D7.5mm_W2.5mm_P5.00mm | C1 |
| 1 | Conn_01x02 | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J15_VCC1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J14_LCD_I2C1 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J9_RFID1 |
Similar boards
- 2 layers69.1 × 53.8 mm
Motor controller
AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum
25 parts79MIT - 2 layers68.6 × 53.3 mm
Protogasm Board V2
Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.
14 parts67MIT - 2 layers53.8 × 69.6 mm
EVSE V2 2
PedroCNeves/AC_ChargingStation
A learning project to create an EV AC Charging station based on an Arduino Uno
32 parts50 - 2 layers113.7 × 61 mm
ArduTester SMD
jonsag/arduTester
An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4
17 parts14 - 4 layers65.9 × 52.9 mm
- 4 layers68.6 × 53.3 mm
101 PCB
ICRS/101
The all-new open source Robotics 101 course from ICRS. It's specifically designed to be run in hackspaces, after school clubs and university societies.
89 parts10CC-BY-4.0 - 2 layers53.3 × 68.3 mm
Questions
What parts does the Pcb 1 use?
42 parts, built around the ARDUINO UNO R3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pcb 1 KiCad files?
From the davinmln/Smart-Parking repository on GitHub, at the commit this page was made from: the board is Hardware/PCB Hardware/PCB Kicad/pcb 1.kicad_pcb and its schematic Hardware/PCB Hardware/PCB Kicad/pcb 1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pcb 1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask davinmln before reusing the design.