2 layers147.3 × 95.3 mm
Nixie proj conflict-20171112-163801
dm2lct/tlnixie
PCB files for the Turmlabor nixie clock 2.0
117 parts11GPL-3.0
2 layers131.2 × 21 mm
Chaklock
davidzindovic/ChaclockA LED based clock that runs on the ESP8266 microcontroller. The 12 numbers light up depending on the time (approximation of 5 min), while the main 9 segment "picture" includes a color fade
- Size
- 131.2 × 21 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 38
- Pads
- 152
- Tracks, vias
- 325, 30
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 26 Dec 2021
- Updated
- 28 May 2026
Overview
Chaklock is an open-source printed circuit board by davidzindovic, from the davidzindovic/Chaclock repository on GitHub. It is a 2-layer board of 131.2 × 21 mm with 52 parts on 38 nets, routed with 325 tracks and 30 vias.
It is built around the ESP-12E, LM1117-3.3 and WS2812B. Its parts include 19 connectors, 9 diodes, 5 resistors, 2 capacitors and 2 ICs. It belongs with the ESP8266 boards of this library.
Main components
3
ESP-12E
SMD,24x16mm-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、SPI、I2C SMD,24x16mm WiFi Modules ROHSAi-ThinkerWiFi Modules
LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdAmbiental-Clock
A LED based clock that runs on the ESP8266 microcontroller. The 12 numbers light up depending on the time (approximation of 5 min), while the main 9 segment "picture" includes a color fade depending on the time of day. The code includes a sleep mode , which resets the uC entirely in order to prevent the timer overflow. (in order to prevent any visible change upon reset - since it will most likely happen during the night) The clock fades on sometime during the morning and fades off at a certain point during nightime.
The colors and silhuette are meant to simbolize a meditating person, relating to chakras - hence the name Chaclock.
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J2, J3, J4, J6, J7, J8, J9, J10, J11, J12, J13 |
| 9 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9 |
| 9 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8, D9 |
| 6 | Edge_Solder_pad | My Library:Edge Solder pad | J14, J15, J16, J17, J18, J19 |
| 6 | MountingHole_2.1mm | MountingHole:MountingHole_2.1mm | Ф 2mm, Ф 2mm, Ф 2mm, Ф 2mm, Ф 2mm, Ф 2mm |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4 |
| 2 | 10u | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2 |
| 1 | 220E | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | Conn_01x06_Female | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | ESP-12E | RF_Module:ESP-12E | U1 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U2 |
Questions
How big is the Chaklock PCB?
It measures 131.2 × 21 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Chaklock use?
52 parts, built around the ESP-12E, LM1117-3.3 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Chaklock KiCad files?
From the davidzindovic/Chaclock repository on GitHub, at the commit this page was made from: the board is PCB/Chaklock.kicad_pcb and its schematic PCB/Chaklock.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Chaklock design in my own project?
Its repository states no licence, so its author keeps all rights: ask davidzindovic before reusing the design.
Similar boards
- 2 layers140 × 72.5 mm
Nixie proj
dm2lct/Nixieclock_kit
This is a Nixie-clock controlled by a ESP8266 module with NTP and MQTT support.
119 parts9GPL-3.0 - 2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 2 layers43 × 34.3 mm
- 2 layers47 × 37.5 mm
- 2 layers60 × 40 mm
Forcegauge
szbeni/forcegauge
Traning for climbing. Load cell with HX711 and real time plotting,
77 parts18GPL-3.0 - 4 layers110 × 55 mm
- 4 layers45 × 89 mm
