
Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

Hardware and software for playing around with BLE direction finding.
Nordic tag is an open-source printed circuit board by davidlenfesty, from the davidlenfesty/nordic_aoa repository on GitHub. It is a 2-layer board with 39 parts on 50 nets.
It is built around the NRF52811-QCAA-R and AP2112K-3.3. Its parts include 14 capacitors, 8 resistors, 5 diodes, 3 ICs and 3 switches. It belongs with the radio and wireless boards and the STM32 and nRF52 and nRF5x boards of this library.
This is where I'm putting hardware and software for playing around with BLE direction finding with the nRF52811.
This is partly for getting direction finding support into NimBLE, but that depends on the timeframe and if I get the hardware done before any commercial hardware shows up.
There will be two boards, the tag, and the locator. Both will be dev boards, with a USB debugging interface (CMSIS-DAP or dap42 or something), some broken out pins, and the antennas.
To see an interactive bom, open $board/bom/ibom.html in a web browser.
I will do this board first, to ensure that I can do the RF design, as I have never done any RF before. It will just be a board with a USB debugging interface and a single antenna.
This will be the "final product" and will have an array (3x3 or 4x4, haven't decided yet) of antennas to do the direction finding.
I'll have some firmware done at some point to actually do the playing around. It'll use Nordic's SDK to keep things simple.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1k | Resistor_SMD:R_0603_1608Metric | R202, R203, R303, R304, R305 |
| 5 | LED | LED_SMD:LED_0603_1608Metric | D201, D202, D301, D302, D303 |
| 4 | 12p | Capacitor_SMD:C_0603_1608Metric | C202, C204, C301, C302 |
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric | C203, C205, C209 |
| 3 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW201, SW301, SW302 |
| 2 | 0u1 | Capacitor_SMD:C_0603_1608Metric | C303, C304 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R301, R302 |
| 1 | 0p8 | Capacitor_SMD:C_0603_1608Metric | C101 |
| 1 | 100p | Capacitor_SMD:C_0603_1608Metric | C207 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R201 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C206 |
| 1 | 32MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSoldering | Y201 |
| 1 | 3n9 | Inductor_SMD:L_0603_1608Metric | L101 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C201 |
| 1 | 8MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSoldering | Y301 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U101 |
| 1 | Antenna_Shield | RF_Antenna:Texas_SWRA117D_2.4GHz_Right | AE101 |
| 1 | Conn_01x08_Male | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J102 |
| 1 | NC | Capacitor_SMD:C_0603_1608Metric | C208 |
| 1 | STM32F042F4Px | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U301 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_629105150521 | J101 |
| 1 | nRF52811-QCAA | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm | U201 |

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…




39 parts, built around the NRF52811-QCAA-R and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the davidlenfesty/nordic_aoa repository on GitHub, at the commit this page was made from: the board is hardware/nordic_tag/nordic_tag.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask davidlenfesty before reusing the design.