

R2 warpcore driver
- Size
- 151 × 94.4 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 64
- Nets
- 94
- Pads
- 265
- Tracks, vias
- 416, 121
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 Feb 2024
- Updated
- 5 Mar 2024
Overview
R2 warpcore driver is an open-source printed circuit board by daveismith, from the daveismith/r2-warpcore-cell-control repository on GitHub. It is a 4-layer board of 151 × 94.4 mm with 64 parts on 94 nets, routed with 416 tracks and 121 vias.
It is built around the ESP32-S3-MINI-1-N8, LDL1117S33R and IRLB8721PBF, with the L8050QLT1G and LESD5D5.0CT1G among its other parts. Its parts include 22 resistors, 16 connectors, 10 capacitors, 8 transistors and 3 ICs. It belongs with the ESP32 boards of this library.
Main components
5ESP32-S3-MINI-1-N8
SMD-104.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 330mA 3V~3.6V 97mA Bluetooth5.0 ESP32-S3FN8 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD WiFi Modules ROHSEspressif SystemsWiFi ModulesLDL1117S33R
SOT-223-4-40℃~+125℃@(Tj) 1 1.2A 18V 3.3V 500uA 600mV@(1.2A) 60uVrms 87dB@(120Hz) Fixed Over Current Protection、Thermal Shutdown Positive SOT-223-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsIRLB8721PBF
TO-220AB-55℃~+175℃ 1 N-channel 1.077nF 110pF 13nC@4.5V 16mΩ@4.5V 2.35V 30V 360pF 62A 65W N-Channel ±20V TO-220AB MOSFETs ROHSInfineon TechnologiesMOSFETsL8050QLT1G
SOT-23-55℃~+150℃ 1 NPN 100 150nA 225mW 25V 500mV 5V 800mA NPN SOT-23 Bipolar (BJT) ROHSLeshan Radio (LRC)Bipolar (BJT)LESD5D5.0CT1G
SOD-523-55℃~+150℃ 100W 12pF 16V 1uA 5V 7A 7V Bidirectional ESD IEC 61000-4-2 SOD-523 ESD and Surge Protection (TVS/ESD) ROHSGOODWORKUncategorised
README
README.mdr2-warpcore-cell-control
Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0(1%) | Resistor_SMD:R_0402_1005Metric | R1, R3, R4, R10, R11, R12, R13, R14 |
| 5 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2, J3, J11, J15, J16 |
| 4 | 0.1uF/50V(10%) | Capacitor_SMD:C_0402_1005Metric | C2, C5, C6, C8 |
| 4 | 1K(1%) | Resistor_SMD:R_0402_1005Metric | R15, R16, R17, R21 |
| 3 | 10K(1%) | Resistor_SMD:R_0402_1005Metric | R2, R5, R6 |
| 3 | 10uF/25V(20%) | Capacitor_SMD:C_0805_2012Metric | C1, C4, C7 |
| 3 | IRLB8721PBF | Package_TO_SOT_THT:TO-220-3_Vertical | Q3, Q4, Q5 |
| 3 | Q_PNP_BEC | Package_TO_SOT_SMD:SOT-23-3 | Q6, Q7, Q8 |
| 3 | Screw_Terminal_01x04 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-4-3.5-H_1x04_P3.50mm_Horizontal | J5, J7, J8 |
| 2 | 100 | Resistor_SMD:R_0402_1005Metric | R8, R9 |
| 2 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J6, J14 |
| 2 | L8050QLT1G | Package_TO_SOT_SMD:SOT-23-3 | Q1, Q2 |
| 2 | LESD5D5.0CT1G | Diode_SMD:D_SOD-523 | D1, D2 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1, SW2 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 171825-4 | easyeda2kicad:HDR-TH_4P-P2.54-D1.0 | J13 |
| 1 | 1uF/16V(10%) | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 200 | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 220R | Resistor_SMD:R_0402_1005Metric | R24 |
| 1 | 22K | Resistor_SMD:R_0402_1005Metric | R23 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R25 |
| 1 | 4.7uF/16V(10%) | LED_SMD:LED_0603_1608Metric | C9 |
| 1 | 47K | Resistor_SMD:R_0402_1005Metric | R22 |
| 1 | CP2102N-Axx-xQFN24 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U3 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J4 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | ESP32-S3-MINI-1 | PCM_Espressif:ESP32-S3-MINI-1 | U1 |
| 1 | LDL1117S33R | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | Screw_Terminal_01x02 | Connector_Wire:SolderWire-0.75sqmm_1x02_P7mm_D1.25mm_OD3.5mm | J10 |
| 1 | Screw_Terminal_01x03 | Connector_Wire:SolderWire-0.75sqmm_1x03_P7mm_D1.25mm_OD3.5mm | J9 |
| 1 | USB_B_Micro | Connector_USB:USB_Mini-B_Tensility_54-00023_Vertical | J12 |
Similar boards
- 2 layers26.8 × 62 mm

- 4 layers50 × 40 mm

- 4 layers115 × 55 mm

Roamr motors
uw-roamr/roamr
turn your phone into a robot running SLAM with two motors, two control boards, and a bluetooth chip
110 parts6 - 4 layers124 × 95 mm

- 2 layers36.6 × 57.1 mm

ESP32 S3 devkit test
FrWA14/KiCad8_ESP32S3_DevModule_wroom-1_DevelopementBoard
Contient tout les fichier KiCad nécessaire pour faire une carte ESP32S3 avec un module Wroom-1.
44 parts1 - 4 layers89 × 51 mm

Kicad soundcard dev v0
radutolontan/BASM_Pocket_Museum
The Pocket Lab is the next-generation approach to science education. Designed by the Bucharest Applied STEAM Museum, it brings scientific exploration into anyone's hands.
141 parts1 - 2 layers35.2 × 51 mm

- 2 layers30 × 63 mm

Questions
How big is the R2 warpcore driver PCB?
It measures 151 × 94.4 mm and has 4 copper layers, 1.61 mm thick.
What parts does the R2 warpcore driver use?
64 parts, built around the ESP32-S3-MINI-1-N8, LDL1117S33R, IRLB8721PBF and L8050QLT1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the R2 warpcore driver KiCad files?
From the daveismith/r2-warpcore-cell-control repository on GitHub, at the commit this page was made from: the board is r2_warpcore_driver.kicad_pcb and its schematic power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the R2 warpcore driver design in my own project?
Its repository states no licence, so its author keeps all rights: ask daveismith before reusing the design.