

IsolatedVoltageSensor
- Size
- 125 × 85 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 128
- Nets
- 64
- Pads
- 299
- Tracks, vias
- 370, 629
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 8 Feb 2025
- Updated
- 28 May 2025
Overview
IsolatedVoltageSensor is an open-source printed circuit board by datacrystals, from the datacrystals/TractionInverterV3 repository on GitHub. It is a 4-layer board of 125 × 85 mm with 128 parts on 64 nets, routed with 370 tracks and 629 vias.
It is built around the TLV6001QDCKRQ1, R-78K3.3-1.0 and AMC3330QDWERQ1, with the FBMJ1608HS220NTR and UVY1E102MPD1TD among its other parts. Its parts include 50 capacitors, 24 resistors, 4 ICs and 2 connectors.
Main components
5TLV6001QDCKRQ1
SC-70-5-2.75V~-900mV、900mV~2.75V -40℃~+125℃ 1 1.8V~5.5V 1MHz 1pA 1pA 28nV/√Hz@1kHz 2uV/℃ 500V/ms 750uV 75mA 75uA 76dB ESD protection、EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SC-70-5 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierR-78K3.3-1.0
SIP,11.5x7.6mm1 1A 3.3V 4.5V~36V 88% Short Circuit Protection、Under Voltage Protection SIP,11.5x7.6mm Isolated Power Modules ROHSRECOM PowerIsolated Power ModulesAMC3330QDWERQ1
SOIC-16-300mil-40℃~+125℃ 135kV/us 2 2.5nA 375kHz 4250 50uV Differential Isolated ΔΣ (Sigma-Delta) modulator、Full-differential topology、Integrated digital interface、Single-supply isolation、Integrated isolated power supply SOIC-16-300mil Isolation Amplifiers ROHSTexas InstrumentsIsolation AmplifiersFBMJ1608HS220NTR
06031 22Ω@100MHz 4mΩ 7.5A ±30% 0603 Ferrite Beads ROHSTaiyo YudenFerrite BeadsUVY1E102MPD1TD
插件-55℃~+105℃ 1000hrs@105℃ 1000uF 10mm 25V 5mm 610mA@120Hz ±20% 插件 Aluminum Electrolytic Capacitors - Leaded ROHSNichiconAluminum Electrolytic Capacitors - Leaded
Parts
128| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | TestPoint | TestPoint:TestPoint_Loop_D2.54mm_Drill1.5mm_Beaded | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +8 |
| 20 | 100nF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C36, C38, C42, C44, C47, C50, C52, C55, C58, C59, C62, C64, C67, C70, C71, C74 +4 |
| 16 | 10nF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C40, C41, C43, C46, C48, C49, C51, C56, C60, C61, C63, C68, C72, C73, C75, C80 |
| 12 | 1uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C35, C39, C45, C53, C54, C57, C65, C66, C69, C77, C78, C81 |
| 8 | 0 | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R37, R38, R43, R44, R49, R50, R55, R56 |
| 8 | 10k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R39, R40, R45, R46, R51, R52, R57, R58 |
| 8 | 16.5k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R41, R42, R47, R48, R53, R54, R59, R60 |
| 4 | AMC3330QDWERQ1 | InverterCom:SOIC127P1030X265-16N | AT1, AT2, AT3, AT4 |
| 4 | FBMJ1608HS220NTR | InverterCom:BEADC1608X100N | FB1, FB2, FB3, FB4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_5.3mm_M5_ISO7380_Pad | H1, H2, H3, H4 |
| 4 | SZMMSZ4678T1G | InverterCom:SOD3716X135N | Z1, Z2, Z3, Z4 |
| 4 | TLV6001QDCKRQ1 | InverterCom:SOT65P210X110-5N | IC1, IC2, IC11, IC12 |
| 2 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1, J2 |
| 2 | LOGO | InverterCom:Silkscreen_Logo_CelstialBeing_S | G***, G*** |
| 2 | UVY1E102MPD1TD | InverterCom:CAPPRD500W60D1025H1750 | C1, C4 |
| 1 | LOGO | InverterCom:Char_AllelujahHaptism_20mm | G*** |
| 1 | R-78K3.3-1.0 | InverterCom:R78K3310 | PS1 |
The 124 most common of 128 parts.
More from datacrystals/TractionInverterV3
6- 2 layers450 × 150 mm

- 4 layers430 × 310 mm

- 4 layers250 × 150 mm

- 4 layers250 × 150 mm

- 4 layers350 × 150 mm

- 4 layers112.5 × 120 mm

Similar boards
- 4 layers175 × 125 mm

- 4 layers92.3 × 48.6 mm

- 4 layers71.1 × 89.6 mm

- 4 layers85.6 × 53.8 mm

- 4 layers125.7 × 76.5 mm

UGC Main
HandHeldLegend/GC-Ultimate
The 3D shell, buttons, and other associated models are licensed under a Creative Commons Attribution 4.0 International License .
128 parts62 - 4 layers80 × 131.8 mm

Swoop
atopile/swoop
With swoop, you can fly remote controlled aircraft with the motion of your hand. It's especially fun when flying FPV because the motion of your remote precisely maps to the aircraft.
128 parts51MIT - 4 layers50 × 50 mm

SimpleFC
wangyeee/OpenHardware
Collections of hardware design related to my drone project.
128 parts10BSD-3-Clause - 4 layers60 × 44 mm

Questions
How big is the IsolatedVoltageSensor PCB?
It measures 125 × 85 mm and has 4 copper layers, 1.6 mm thick.
What parts does the IsolatedVoltageSensor use?
128 parts, built around the TLV6001QDCKRQ1, R-78K3.3-1.0, AMC3330QDWERQ1 and FBMJ1608HS220NTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IsolatedVoltageSensor KiCad files?
From the datacrystals/TractionInverterV3 repository on GitHub, at the commit this page was made from: the board is Boards/IsolatedVoltageSensor/IsolatedVoltageSensor.kicad_pcb and its schematic Boards/ControlBoard/AnalogInFilters.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IsolatedVoltageSensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask datacrystals before reusing the design.