2 layers200 × 130 mm
2 layers243 × 165.8 mm
Right half
datacompboy/split-keyboard3My very own split keyboard
- Size
- 243 × 165.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 118
- Nets
- 97
- Pads
- 640
- Tracks, vias
- 544, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 6 Jun 2022
- Updated
- 12 Jun 2022
Overview
Right half is an open-source printed circuit board by datacompboy, from the datacompboy/split-keyboard repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 243 × 165.8 mm with 118 parts on 97 nets, routed with 544 tracks and 0 vias.
It belongs with the keyboards and input boards and the RP2040 boards of this library.
README
README.mdParts
118| Qty | Value | Footprint | References |
|---|---|---|---|
| 54 | D | Diode_SMD:D_SOD-123 | D_0, D_1, D_2, D_10, D_11, D_12, D_13, D_14, D_15, D_16, D_17, D_18, D_19, D_20, D_21, D_22 +38 |
| 47 | KEYSW | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_Choc_V1V2_1.00u | K_0, K_1, K_2, K_10, K_11, K_12, K_13, K_14, K_15, K_16, K_18, K_19, K_20, K_21, K_22, K_24 +31 |
| 4 | Choc | Switch_Keyboard_Hotswap_Kailh:Stab-PG1350-2u.kicad_mod | ST_23, ST_27, ST_31, ST_48 |
| 4 | MountingHole_2.2mm_M2 | MountingHole:MountingHole_2.2mm_M2 | MH_BL, MH_BR, MH_LT, MH_TR |
| 2 | KEYSW | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_Choc_V1V2_1.50u | K_5, K_29 |
| 1 | Conn_01x04_Male | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | KBLink1 |
| 1 | KEYSW | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_Choc_V1V2_2.00u | K_31 |
| 1 | KEYSW | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_Choc_V1V2_2.25u | K_27 |
| 1 | KEYSW | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_Choc_V1V2_1.75u | K_23 |
| 1 | KEYSW | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_Choc_V1V2_2.75u | K_48 |
| 1 | KEYSW | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_Choc_V1V2_1.25u | K_17 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | RPi_Pico1 |
Questions
How big is the Right half PCB?
It measures 243 × 165.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Right half use?
118 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Right half KiCad files?
From the datacompboy/split-keyboard repository on GitHub, at the commit this page was made from: the board is pcb/right-half.kicad_pcb and its schematic pcb/left-half.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Right half design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from datacompboy/split-keyboard
1Similar boards
- 2 layers218.5 × 159.5 mm
- 2 layers139.1 × 107.7 mm
Lotus58 Glow 131
TweetyDaBird/Lotus-58-Classic
A split ergo linear keyboard derived from the Lily58 family
118 parts390 - 2 layers40 × 100 mm
Back pcb
ZeroPhone/ZeroPhone-PCBs
PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!
118 parts148GPL-3.0 - 2 layers60 × 80 mm
RobotCrawler
BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.
118 parts94BSD-3-Clause - 2 layers142.1 × 106 mm
- 2 layers99.6 × 100 mm
PCB Fujitora
OPRobots/FujitoraBot
Robotracer - siguelíneas de alto rendimiento; con succión, tracción brushless en sistema tetra y procesador STM32F4
118 parts68GPL-3.0 - 2 layers100 × 80 mm
Panel
richardeoin/ax
This repository contains hardware and software for the AX5043 and AX5243 radios from AxSemi (now ON Semiconductor). They are probably the same die, but the AX5243 has fewer pins.
118 parts48 - 2 layers100 × 100 mm
