2 layers243 × 165.8 mm
2 layers200 × 130 mm
Left half
datacompboy/split-keyboard3My very own split keyboard
- Size
- 200 × 130 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 92
- Nets
- 85
- Pads
- 520
- Tracks, vias
- 387, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 6 Jun 2022
- Updated
- 12 Jun 2022
Overview
Left half is an open-source printed circuit board by datacompboy, from the datacompboy/split-keyboard repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 200 × 130 mm with 92 parts on 85 nets, routed with 387 tracks and 0 vias.
It belongs with the keyboards and input boards and the RP2040 boards of this library.
README
README.mdParts
92| Qty | Value | Footprint | References |
|---|---|---|---|
| 42 | D | Diode_SMD:D_SOD-123 | D_0, D_1, D_2, D_10, D_11, D_12, D_13, D_14, D_15, D_16, D_17, D_18, D_19, D_20, D_21, D_22 +26 |
| 36 | KEYSW | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_Choc_V1V2_1.00u | K_0, K_1, K_2, K_10, K_11, K_12, K_13, K_14, K_15, K_16, K_17, K_18, K_19, K_20, K_22, K_23 +20 |
| 4 | MountingHole_2.2mm_M2 | MountingHole:MountingHole_2.2mm_M2 | MH_BL, MH_BR, MH_TL, MH_TR |
| 2 | Choc | Kailh_Choc:Stab-PG1350-2u.kicad_mod | ST_21, ST_28 |
| 2 | KEYSW | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_Choc_V1V2_1.50u | K_26, K_29 |
| 1 | Conn_01x04_Male | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | KBLink1 |
| 1 | KEYSW | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_Choc_V1V2_1.75u | K_27 |
| 1 | KEYSW | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_Choc_V1V2_1.25u | K_5 |
| 1 | KEYSW | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_Choc_V1V2_2.00u | K_28 |
| 1 | KEYSW | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_Choc_V1V2_2.75u | K_21 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | RPi_Pico1 |
Questions
How big is the Left half PCB?
It measures 200 × 130 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Left half use?
92 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Left half KiCad files?
From the datacompboy/split-keyboard repository on GitHub, at the commit this page was made from: the board is pcb/left-half.kicad_pcb and its schematic pcb/left-half.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Left half design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from datacompboy/split-keyboard
1Similar boards
- 2 layers102.4 × 211.3 mm
Haxophone001
cardonabits/haxo-hw
Haxophone, an electronic musical instrument that resembles a saxophone
92 parts674 - 2 layers40.6 × 110 mm
Europi surface mount
Allen-Synthesis/EuroPi
EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico
92 parts584CC0-1.0 - 2 layers142.5 × 101 mm
Hillside46
mmccoyd/hillside
Family of split ergonomic keyboards with three rows of six or five keys and a generous thumb arc
92 parts448MIT - 2 layers217.6 × 68.1 mm
Keezyboost40
ChrisChrisLoLo/keezyboost40
4x10 ortholinear with an LCD in the middle. Uses the Raspberry Pi Pico, as well as Rust firmware
92 parts202CC-BY-SA-4.0 - 2 layers39 × 40 mm
Mdb ai bridge esp32s3
nodestark/mdb-esp32-cashless
ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT
92 parts190MIT - 2 layers227.5 × 87.4 mm
- 2 layers120 × 70 mm
- 2 layers93.9 × 80.7 mm
Froggyswadge
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
92 parts114