

Esp32-c3-headset
WIP: An ESP32-C3 based bluetooth headset PCB with headphone jack
- Size
- 55 × 65 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 71
- Pads
- 170
- Tracks, vias
- 5, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 2 Jun 2023
- Updated
- 12 Jun 2023
Overview
Esp32-c3-headset is an open-source printed circuit board by dasisdormax, from the dasisdormax/esp32-c3-headset repository on GitHub. It is a 4-layer board of 55 × 65 mm with 30 parts on 71 nets, routed with 5 tracks and 0 vias.
It is built around the ESP32-C3-WROOM-02-H4, PAM8908JER and BQ29728DSE, with the PCM5102APW, TPS63031DSK and DMG9926UDM among its other parts. Its parts include 10 capacitors, 7 resistors, 6 ICs, 2 transistors and 2 connectors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
8ESP32-C3-WROOM-02-H4
SMD,20x18mm-105dBm -40℃~+105℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesPAM8908JER
QFN-16-EP(3x3)-40℃~+85℃ 0.03% 100dB 2 Pairs Differential Inputs 2-Channel 2.5V~5.5V 35mWx2@16Ω 4mA 75dB Class AB Enable/shutdown function、Digitally programmable gain QFN-16-EP(3x3) Audio Amplifiers ROHSDiodes IncorporatedAudio AmplifiersBQ29728DSE
WSON-6(1.5x1.5)-40℃~+85℃ 1 WSON-6(1.5x1.5) Battery Management ROHSTexas InstrumentsBattery ManagementPCM5102APW
TSSOP-20-25℃~+85℃ 1.8V~3.3V 2 32 384kHz 500uA 50MHz Audio Decoder Digital filtering、Power-down mode I2S TSSOP-20 ADCs/DACs - Special Purpose ROHSTexas InstrumentsADCs/DACs - Special PurposeTPS63031DSK
UncategorisedTexas InstrumentsDMG9926UDM
SOT-26-55℃~+150℃ 2 N-Channel 20V 32mΩ@2.5V 4.2A 78pF 8.3nC@4.5V 83pF 856pF 900mV 980mW N-Channel SOT-26 MOSFETs ROHSDiodes IncorporatedMOSFETsDMP3165L-7
SOT-23-55℃~+150℃ 1 P-Channel 1.3V 134mΩ@4.5V 2nC@10V 3.3A 300pF 30V 35pF 800mW SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsSS54
SMA(DO-214AC)-55℃~+125℃ 1mA@40V 40V 550mV@5A 5A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdWIP: esp32-c3-headset
Components and data sheets
- ESP32-C3:
- Series Datasheet: https://espressif.com/documentation/esp32-c3_datasheet_en.pdf
- ESP32-C3-WROOM-02 Module Datasheet: https://www.espressif.com/documentation/esp32-c3-wroom-02_datasheet_en.pdf
- Battery:
- Cell holder: Keystone 2460: https://www.keyelco.com/userAssets/file/Keystone-M70-FullVersion.pdf
- Battery Charge controller MCP73831-2ACI-OT: http://ww1.microchip.com/downloads/en/DeviceDoc/20001984g.pdf
- Battery protection: BQ29728: https://www.ti.com/lit/ds/symlink/bq2972.pdf
- Battery charge/discharge MOSFET: DMG9926 https://www.diodes.com/assets/Datasheets/ds31770.pdf
- Power Supply:
- p-channel enhancement MOSFET: DMP3165L https://www.diodes.com/assets/Datasheets/DMP3165L.pdf
- TPS63031 Buck-Boost Converter: https://www.ti.com/lit/ds/symlink/tps63031.pdf
- Audio:
- Connector: PJ320-D
- Stereo Audio DAC: PCM5102: https://www.ti.com/lit/ds/symlink/pcm5102.pdf
- Stereo Audio Amplifier:
- PAM8908: https://www.diodes.com/assets/Datasheets/products_inactive_data/PAM8908.pdf
- Compatible alternative TPA6132A2: https://www.ti.com/lit/ds/symlink/tpa6132a2.pdf
Licensing
Copyright © 2023 Maximilian Wende
- KiCad components: These are adapted from the KiCad Libraries and licensed under the same terms.
- Hardware design, documentation and remaining files: GNU General Public License, version 3 or later.
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1u | Capacitor_SMD:C_0402_1005Metric | C4, C5, C6, C7, C8, C9, C10 |
| 2 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 1 | 1.5u | Inductor_SMD:L_1206_3216Metric | L1 |
| 1 | 10u | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 2.2k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 20k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 2k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | AudioJack4 | Connector_Audio:Jack_3.5mm_PJ320D_Horizontal | J2 |
| 1 | BQ29728 | Package_SON:WSON-6_1.5x1.5mm_P0.5mm | U5 |
| 1 | DMG9926UDM | Package_TO_SOT_SMD:SOT-23-6 | Q2 |
| 1 | DMP3165L | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | ESP32-C3-WROOM-02 | 0-thisproject:ESP32-C3-WROOM-02 | U1 |
| 1 | Li-Ion | Battery:BatteryHolder_Keystone_2460_1xAA | BT1 |
| 1 | MCP73831-2ACI-OT | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | PAM8908 | Package_DFN_QFN:WQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm_ThermalVias | U6 |
| 1 | PCM5102A | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U4 |
| 1 | SS54 | Diode_SMD:D_SMA | D1 |
| 1 | TPS63031DSK | Package_SON:WSON-10-1EP_2.5x2.5mm_P0.5mm_EP1.2x2mm | U3 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
Similar boards
- 4 layers55.5 × 96.8 mm

- 4 layers

Power module
FETfox/Li-Ion_Power_Module
A PCB that can protect,charge, and regulate a Li Ion battery to power MCU powered projects.
144 partsCC0-1.0 - 4 layers100 × 100 mm

Stm midi poc1
LispEngineer/stm-midi-poc1
MIDI synthesizer built around an STM32 - Proof of Concept #1 (counting from 0)
119 parts3CC-BY-SA-4.0 - 4 layers80 × 54 mm

Poket
kaorii-ako/Poket
ESP32-S3 Bluetooth MP3 player - custom PCB + 3D-printed case, built from scratch
104 parts - 4 layers47.1 × 33.5 mm

GamePad I2S audio
intergalaktik/Extension_Boards_for_Olimex_GateMate
Simple extension boards for Olimex GateMate FPGA Board
85 parts20 - 4 layers100 × 100 mm

Pico Dev iCE
frohro/pico-dev-ice
This is a direct down conversion (DDC) HF transceiver & VNA using the Raspberry Pi Pico and the iCE40UP5K.
294 parts3 - 4 layers28 × 100.5 mm

- 4 layers

Dog tracker
GabrielPetrov/hardware-portfolio
Repo containing otherwise offline PCB/Embedded projects
43 parts
Questions
How big is the Esp32-c3-headset PCB?
It measures 55 × 65 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Esp32-c3-headset use?
30 parts, built around the ESP32-C3-WROOM-02-H4, PAM8908JER, BQ29728DSE and PCM5102APW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32-c3-headset KiCad files?
From the dasisdormax/esp32-c3-headset repository on GitHub, at the commit this page was made from: the board is kicad/project.kicad_pcb and its schematic kicad/project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32-c3-headset design in my own project?
Its repository states no licence, so its author keeps all rights: ask dasisdormax before reusing the design.