2 layers54.4 × 71.9 mm
2 layers
LabnodeIO
das-labor/automatization4.01Automatization of our Hackerspace
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 22
- Pads
- 81
- Tracks, vias
- 181, 10
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 20 Feb 2018
- Updated
- 16 Sep 2019
Overview
LabnodeIO is an open-source printed circuit board by das-labor, from the das-labor/automatization4.0 repository on GitHub. It is a 2-layer board with 19 parts on 22 nets, routed with 181 tracks and 10 vias.
It is built around the LM324 and PCF8574T. Its parts include 7 resistors, 5 capacitors, 3 connectors, 2 ICs and 2 diodes.
Main components
2
LM324
SOP-14-1.5V~10V 0℃~+70℃ 24V 250nA 3V~20V 4 40mA 50nA 700uA 7mV 80dB SOP-14 Operational Amplifier ROHSHXY MOSFETOperational Amplifier
PCF8574T
SOP-16-300mil-40℃~+85℃ 100kHz 10uA 2.5V~6V 25mA 300uA 8 8 Cascading and address extension、Built-in LED driver I2C Interrupt Output Open-drain SOP-16-300mil I/O Expanders ROHSHGSEMII/O Expanders
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 22k | Resistors_SMD:R_0603_HandSoldering | R1, R2, R3, R4 |
| 2 | 100n | Capacitors_SMD:C_0805_HandSoldering | C1, C2 |
| 2 | 100u | Capacitors_THT:CP_Radial_D4.0mm_P2.00mm | C4, C5 |
| 2 | LED_Small | LEDs:LED_D3.0mm | D1, D2 |
| 2 | R | Resistors_SMD:R_0603_HandSoldering | R6, R7 |
| 1 | 100u | Capacitors_THT:CP_Radial_D8.0mm_P3.80mm | C3 |
| 1 | 1k5 | Resistors_SMD:R_0603_HandSoldering | R5 |
| 1 | EXT3 | Pin_Headers:Pin_Header_Straight_2x05_Pitch2.54mm | J2 |
| 1 | LM324 | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm | U2 |
| 1 | PCF8574 | Housings_SOIC:SOIC-16W_7.5x12.8mm_Pitch1.27mm | U1 |
| 1 | mc 0.5-2.5 | Connectors_Molex:Molex_KK-6410-10_10x2.54mm_Straight | J1 |
| 1 | mc 0.5-2.5 | Connectors_Molex:Molex_KK-6410-03_03x2.54mm_Straight | J3 |
More from das-labor/automatization4.0
3- 2 layers
- 2 layers
Similar boards
- 2 layers
- 2 layers82.6 × 79.5 mm
- 2 layers100 × 100 mm
- 2 layers100 × 45 mm
- 2 layers148.6 × 192.2 mm
Badge
NuttyShell/NuttyBadge
NuttyBadge: A NuttyShell crafted multi-tool. Opensourced Hardawre and Software
169 parts31GPL-3.0 - 2 layers139.7 × 88.9 mm
- 2 layers83 × 35 mm
- 2 layers45.7 × 67.3 mm
Questions
What parts does the LabnodeIO use?
19 parts, built around the LM324 and PCF8574T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LabnodeIO KiCad files?
From the das-labor/automatization4.0 repository on GitHub, at the commit this page was made from: the board is hardware/LabnodeIO/LabnodeIO.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LabnodeIO design in my own project?
Its repository states no licence, so its author keeps all rights: ask das-labor before reusing the design.