2 layers54.4 × 71.9 mm
2 layers
LabnodeCAN
das-labor/automatization4.01Automatization of our Hackerspace
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 78
- Pads
- 292
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Feb 2018
- Updated
- 16 Sep 2019
Overview
LabnodeCAN is an open-source printed circuit board by das-labor, from the das-labor/automatization4.0 repository on GitHub. It is a 2-layer board with 57 parts on 78 nets.
It is built around the ATMEGA32-16AU, MCP2551-I/SN-HG and LM2574M-5.0, with the MIC5504-3.3YM5 and LL5819 L0G among its other parts. Its parts include 19 capacitors, 14 resistors, 7 diodes, 6 ICs and 6 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5
ATMEGA32-16AU
TQFP-44(10x10)-40℃~+85℃ 10bit 16MHz 1KB 2KB 32 32KB 4.5V~5.5V 8 Bit AVR Built-in FLASH TQFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
MCP2551-I/SN-HG
SOP-8SOP-8 CAN Transceivers ROHSHGSEMICAN Transceivers
LM2574M-5.0
SOIC-14-300mil-40℃~+125℃@(TJ) 1 52kHz Buck Built-in SOIC-14-300mil DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
MIC5504-3.3YM5
SOT-23-5-40℃~+125℃@(Tj) 1 120uVrms 15uA 180mV@(300mA) 3.3V 300mA 5.5V 75dB@(1kHz) Fixed Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LL5819 L0G
MELF-65℃~+125℃ 1 Independent 1A 25A 40V 500uA@40V 600mV@1A MELF Schottky Diodes ROHSTaiwan SemiconductorSchottky Barrier Diodes (SBD)
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C4, C5, C6, C8, C9, C19 |
| 5 | 1k5 | Resistor_SMD:R_0603_1608Metric | R1, R7, R8, R9, R12 |
| 3 | 1u | Capacitor_SMD:C_0603_1608Metric | C14, C15, C16 |
| 2 | 1µ | Capacitor_SMD:C_0603_1608Metric | C11, C13 |
| 2 | 22p | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | 33k | Resistor_SMD:R_0603_1608Metric | R10, R11 |
| 2 | 3V6 | Diode_SMD:D_SOT-23_ANK | D1, D2 |
| 2 | 68 | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D3, D6 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C18 |
| 1 | 10µ | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 16 MHz | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | 1M | Resistor_SMD:R_1206_3216Metric | R5 |
| 1 | 1N4148 | Diode_SMD:D_MELF | D7 |
| 1 | 1N5818 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D5 |
| 1 | 220µ/35V | Capacitor_SMD:CP_Elec_6.3x5.7 | C7 |
| 1 | 22µ | Capacitor_SMD:CP_Elec_4x5.7 | C12 |
| 1 | 2u | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 330µ | LabnodeCAN:L_SMD_95_90 | L2 |
| 1 | 390k | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 470µ/10V | Capacitor_SMD:CP_Elec_8x10.5 | C10 |
| 1 | 4k7 | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | ATMEGA32-16AU | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | CAN | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J2 |
| 1 | Conn_02x02_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J6 |
| 1 | Conn_02x17_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x17_P2.54mm_Vertical | J5 |
| 1 | EXTPWR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | ISP | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J4 |
| 1 | LL5819 | Diode_SMD:D_MELF | D4 |
| 1 | LM2574M-5 | Package_SO:SOIC-14W_7.5x9.0mm_P1.27mm | U3 |
| 1 | MCP2515-EST | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | MCP2551-I-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | MIC5504-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | NODEPWR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP2 |
| 1 | PWR | Connector_BarrelJack:BarrelJack_CUI_PJ-102AH_Horizontal | J3 |
| 1 | SSD1306 | LabnodeCAN:SSD1306_128x64_backmount | U6 |
| 1 | USB_B_Micro | LabnodeCAN:USB_Micro-B_Amphenol_10118194-0001LF_Horizontal | J1 |
More from das-labor/automatization4.0
3- 2 layers
- 2 layers
Similar boards
- 2 layers89.3 × 52.1 mm
Divergence Meter Project v2
waicool20/Divergence-Meter-Project-v2
This is the second iteration of the Divergence Meter Project and another personal learning project, this time learning how to integrate Li-Ion batteries into a project, new electrical converter topologies, Rust…
149 parts28 - 2 layers176.4 × 21.4 mm
- 2 layers100 × 100 mm
- 2 layers95 × 70 mm
- 2 layers
LCD Project
belishaza-jordan/Atmega32
An embedded user-interface project built on the ATmega32 microcontroller. A 16×2 LCD displays a menu and parameter values while push buttons let the user navigate menus, adjust settings, and save values.
18 parts - 2 layers209.5 × 134.5 mm
ATmega32 External Event Object Counter
naslaizer/ATmega32_External_Event_Object_Counter
ATmega32-based External Event Object Counter utilizing hardware interrupts (INT0), an 8-bit parallel 16x2 LCD display, and a custom single-layer curved-track PCB layout.
15 parts - 2 layers
Keyboard Memory Emulator
ShreksHellraiser/Vintage-Keyboard-Memory-Replacement
ABANDONED UNFINISHED - A memory replacement PCB that adds sample loading and saving to the SK-1
40 parts - 2 layers240.7 × 179.5 mm
Smart Ventilator PCB
yesitha/Smart-Ventilator
This project aims to develop a low cost smart ventilator system that requires minimum professional interaction to operate using Atmega32 Microcontroller
69 parts
Questions
What parts does the LabnodeCAN use?
57 parts, built around the ATMEGA32-16AU, MCP2551-I/SN-HG, LM2574M-5.0 and MIC5504-3.3YM5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LabnodeCAN KiCad files?
From the das-labor/automatization4.0 repository on GitHub, at the commit this page was made from: the board is hardware/LabnodeCAN/LabnodeCAN.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LabnodeCAN design in my own project?
Its repository states no licence, so its author keeps all rights: ask das-labor before reusing the design.