Skip to the content
2 layers53 × 56.6 mmFlowState, the printed circuit board in 3D

A project to learn NumPy and embedded systems.

Size
53 × 56.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
39
Pads
99
Tracks, vias
191, 15
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
6 May 2026
Updated
12 May 2026

Overview

FlowState is an open-source printed circuit board by DarrenChan99, from the DarrenChan99/PlantVision repository on GitHub. It is a 2-layer board of 53 × 56.6 mm with 14 parts on 39 nets, routed with 191 tracks and 15 vias.

It is built around the AMS1117-3.3. Its parts include 6 connectors, 3 capacitors, 2 resistors, 2 ICs and 1 diode. It belongs with the ESP32 boards of this library.

Main components

1

README

README.md

PlantVision

Plant Vision is a data driven project that aims to use onboard sensors to display useful information and warnings to the user like a predictive watering algorithm and CO2 threshold monitor to help optimally track and water plants and improve productivity through elevated CO2 level warnings, signaling to the user it might be time to step outside.

Why?

Recently one of my plants died to unknown factors and I realized that I was guessing when to water and how much sun to give it. At this same time I was getting into C++, microcontrollers, and data based algorithms to build my skills. So after some brainstorming this project perfectly encapsulated my needs while providing a hardware challenge with the custom PCB and an open software ceiling where I could explore data algorithms like the low pass filter and predictive irrigation and experiment with python to better visulize the data and show it on the LCD.

Gallery

Schematic
Schematic
PCB Layout
PCB Layout
3D Render
3D Render
CAD View (Front)
CAD Front
CAD View (Back)
CAD Back

BOM

ComponentDescriptionPart NumberSourceQtyNotes
USB-C16-pin (USB 2.0), Top Mount, Right AngleUSB4105-GF-ADigiKey1Exact match for HRO footprint. 5A Rated.
CO2 / Temp / HumSensirion SCD41 Photoacoustic SensorSCD41AliExpress1High accuracy air quality sensing (I2C).
MicrocontrollerESP32 DevKit V1 (Narrow 30-Pin)ESP-WROOM-32Amazon1Dual-core processor with Wi-Fi/Bluetooth.
Voltage Regulator3.3V 800mA LDO (TO-220)LD1117V33DigiKey1Converts 5V USB power to 3.3V.
Input Cap (C1)10µF 25V Electrolytic Radial860020472003DigiKey1Bulk filter for 5V rail (Würth ATG5).
Output Cap (C2)47µF 16V Electrolytic Radial860010372004DigiKey1Stabilizes 3.3V rail (Würth ATG8).
Bypass Cap (C3)100nF 50V X7R Ceramic RadialK104K10X7RF5UH5DigiKey1High-frequency noise filter (Vishay).
Resistors5.1k Ohm 1/4W 1% Metal FilmMFR-25FTE52-5K1DigiKey2Required for SDA/SCL data stability.
Soil SensorCapacitive Moisture Sensor v1.2GenericAmazon1Corrosion-resistant soil tracking.
LCD Touchscreen2.8" or 3.5" TFT SPI DisplayILI9341Amazon1User interface and data visualization.
Solder Wire0.6mm 63/37 Rosin CoreGenericAmazon1Precision gauge for USB-C soldering.
Custom PCB1.6mm thick, 2 layerGenericJLPCB1Wiring

Parts

14
QtyValueFootprintReferences
25.1kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2
1100nFCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC3
110uFCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC1
11N5819Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1
147uFCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC2
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U1
1Conn_01x02_Pin(Switch)Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ6
1Conn_01x03_Pin (SOIL)Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4
1Conn_01x04_Pin (CO2)Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1Conn_01x04_Pin(SD)Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ5
1Conn_01x14_Pin(LCD)Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_VerticalJ3
1ESP32-DEVKIT-V1devkit:MODULE_ESP32_DEVKIT_V1U2
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J1

Similar boards

  • 2 layers290.1 × 130 mmPro V2, the printed circuit board in 3D

    Pro V2

    kata0510/Lily58

    6×4+4keys column-staggered split keyboard.

    312 parts2.3k
  • 2 layers26.2 × 45.5 mmPL18 multiprotocol, the printed circuit board in 3D

    PL18 multiprotocol

    pascallanger/DIY-Multiprotocol-TX-Module

    Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.

    24 parts1.9kGPL-3.0
  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 4 layers85 × 56 mmPslab mini, the printed circuit board in 3D

    Pslab mini

    fossasia/pslab-mini-hardware

    PSLab Mini Hardware https://pslab.io

    182 parts1.2kApache-2.0
  • 4 layers100 × 54 mm32Bit shift register, the printed circuit board in 3D

    32Bit shift register

    MaltWhiskey/Mega-Cube

    16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver

    64 parts766
  • 2 layers44.2 × 29.3 mmI2c tiny usb, the printed circuit board in 3D

    I2c tiny usb

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    27 parts454
  • 2 layers78 × 60 mmIce viz, the printed circuit board in 3D

    Ice viz

    muni-works/vcad

    BRep CAD kernel in Rust/WASM

    44 parts442Apache-2.0
  • 2 layers59.1 × 99.9 mmCheap FOCer 2 60mm, the printed circuit board in 3D

    Cheap FOCer 2 60mm

    shamansystems/Cheap-FOCer-2

    Low-Cost Motor Controller based on the VESC 6

    193 parts407

Questions

How big is the FlowState PCB?

It measures 53 × 56.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the FlowState use?

14 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the FlowState KiCad files?

From the DarrenChan99/PlantVision repository on GitHub, at the commit this page was made from: the board is PCB/FlowState.kicad_pcb and its schematic PCB/FlowState.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the FlowState design in my own project?

Its repository states no licence, so its author keeps all rights: ask DarrenChan99 before reusing the design.