Skip to the content
2 layers100 × 100 mmDiff breakout, the printed circuit board in 3D

check out my website/portfolio @ https://darren4141.github.io/darrenliusite2/index.html

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
59
Nets
59
Pads
237
Tracks, vias
358, 155
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
6 Sep 2024
Updated
26 Sep 2026

Overview

Diff breakout is an open-source printed circuit board by darren4141, from the darren4141/darrenliusite2 repository on GitHub. It is a 2-layer board of 100 × 100 mm with 59 parts on 59 nets, routed with 358 tracks and 155 vias.

It is built around the L293D, LM2596S-3.3 and AP2112K-3.3TRG1, with the BSS138 among its other parts. Its parts include 18 capacitors, 14 resistors, 7 connectors, 6 ICs and 6 transistors. It belongs with the interfaces and adapters boards of this library.

Main components

4

Parts

59
QtyValueFootprintReferences
1210KResistor_SMD:R_0603_1608MetricR1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12
6100nFCapacitor_SMD:C_0805_2012MetricC1, C3, C8, C10, C12, C14
6BSS138Package_TO_SOT_SMD:SOT-23Q1, Q2, Q3, Q4, Q5, Q6
6Conn_01x06_PinConnector_JST:JST_XH_B6B-XH-AM_1x06_P2.50mm_VerticalJ1, J2, J3, J4, J5, J6
4MountingHoleMountingHole:MountingHole_4.5mmH1, H2, H3, H4
310uFCapacitor_SMD:C_1210_3225MetricC4, C7, C11
31uFCapacitor_SMD:C_1210_3225MetricC2, C9, C13
3L293DPackage_DIP:DIP-16_W7.62mmU3, U4, U7
2,
21uFCapacitor_SMD:C_0603_1608MetricC17, C18
11KResistor_SMD:R_0603_1608MetricR13
11N5822Diode_THT:D_DO-201AD_P15.24mm_HorizontalD1
1220uFCapacitor_SMD:C_Elec_8x10.2C16
13.9KResistor_SMD:R_0603_1608MetricR14
1470uFCapacitor_SMD:C_Elec_8x10.2C15
168uHInductor_SMD:L_12x12mm_H6mmL1
1AP2112K-3.3TRG1FlightController:SOT_RG1_DIOU8
1C_SmallCapacitor_SMD:C_0603_1608MetricC6
1C_SmallCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC5
1LM2596S-3.3Package_TO_SOT_SMD:TO-263-5_TabPin3U6
1Screw_Terminal_01x02TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_HorizontalJ7
1~Library:ESP32-WROOM-38U5

More from darren4141/darrenliusite2

6
  • 4 layers55 × 60 mmPiComputeModuleBreakout, the printed circuit board in 3D

    PiComputeModuleBreakout

    darren4141/darrenliusite2

    check out my website/portfolio @ https://darren4141.github.io/darrenliusite2/index.html

    131 parts
  • 2 layers50 × 50 mmStm32 fc, the printed circuit board in 3D

    Stm32 fc

    darren4141/darrenliusite2

    check out my website/portfolio @ https://darren4141.github.io/darrenliusite2/index.html

    90 parts
  • 4 layers68.1 × 67.8 mmFlight Controller-4, the printed circuit board in 3D

    Flight Controller-4

    darren4141/darrenliusite2

    check out my website/portfolio @ https://darren4141.github.io/darrenliusite2/index.html

    77 parts
  • 4 layers17.7 × 27.6 mmMini Flight Controller Board ESP32, the printed circuit board in 3D

    Mini Flight Controller Board ESP32

    darren4141/darrenliusite2

    check out my website/portfolio @ https://darren4141.github.io/darrenliusite2/index.html

    35 parts
  • 2 layers50 × 50 mmEsp32 fc, the printed circuit board in 3D

    Esp32 fc

    darren4141/darrenliusite2

    check out my website/portfolio @ https://darren4141.github.io/darrenliusite2/index.html

    34 parts
  • 2 layers30 × 40 mmCoil driver, the printed circuit board in 3D

    Coil driver

    darren4141/darrenliusite2

    check out my website/portfolio @ https://darren4141.github.io/darrenliusite2/index.html

    17 parts

Similar boards

  • 2 layers50.7 × 51 mmLinefollower pcb, the printed circuit board in 3D

    Linefollower pcb

    Krzysiek-Mistrz/electronics_robotics_designs

    elektronika

    22 parts
  • 2 layers100 × 85 mmEsp32 rio, the printed circuit board in 3D

    Esp32 rio

    dougsthenri/esp32_rio

    A low-cost industrial remote input/output device based on the ESP32-S3 SoC from Espressif

    224 partsMIT
  • 6 layers150 × 130 mmRadCheck SDRAM, the printed circuit board in 3D

    RadCheck SDRAM

    jmh8231-Dev/agissat-hw-2025

    AgisSAT-Hardware

    323 parts
  • 2 layers167 × 117 mmPCB Capstone, the printed circuit board in 3D

    PCB Capstone

    Minh-Nguyen-CEAA/PCB-Capstone-Project-Kicad

    Design and development of a 24VDC motor control board using STM32F411, integrated with ESP32 communication, ICM-20948 IMU sensor, UWB positioning module, and dual buck converters (5V & 3.3V) for embedded robotic…

    47 parts
  • 2 layers63 × 89.5 mmRobot, the printed circuit board in 3D

    Robot

    sidstuff/robot

    A KiCad PCB for an obstacle avoiding robot.

    71 parts5MIT
  • 2 layersShield etage2, the printed circuit board in 3D

    Shield etage2

    robotronik/cdfr2020ShieldCerveauCapteursActionneursElec

    Le kicad du shield f4 à l'étage 2 pour les capteurs (ToF, fin de course, Pixy2), les actionneurs (bras, drapeau)

    60 parts1
  • 2 layers60 × 60 mmHighPower Mechaduino, the printed circuit board in 3D

    HighPower Mechaduino

    pointhi/HighPower-Mechaduino

    Mechaduino derivative which drives up to 10A, drawn using KiCad

    140 parts31

Questions

How big is the Diff breakout PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Diff breakout use?

59 parts, built around the L293D, LM2596S-3.3, AP2112K-3.3TRG1 and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Diff breakout KiCad files?

From the darren4141/darrenliusite2 repository on GitHub, at the commit this page was made from: the board is layouts/diff_breakout.kicad_pcb and its schematic schematics/Flight-Controller-4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Diff breakout design in my own project?

Its repository states no licence, so its author keeps all rights: ask darren4141 before reusing the design.