2 layers28.3 × 39.8 mm
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0
2 layers133.6 × 101.3 mm
Keeb
danzel/keebHas a 3d print case: https://github.com/rwalkr/eskarp
- Size
- 133.6 × 101.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 25
- Pads
- 158
- Tracks, vias
- 238, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 21 Jul 2024
- Updated
- 30 Oct 2024
Overview
Keeb is an open-source printed circuit board by danzel, from the danzel/keeb repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 133.6 × 101.3 mm with 21 parts on 25 nets, routed with 238 tracks and 0 vias.
It belongs with the keyboards and input boards of this library.
README
README.mdReferences
Nice ergogen: https://ergogen.ceoloide.com/
General everything: https://github.com/soundmonster/samoklava
Has a 3d print case: https://github.com/rwalkr/eskarp
Measurements: Choc Switch Raspberry Pi Pico, page 6
Print settings:
100% infill 0.2 layer height
Print 4x of clip
miryoku build
https://github.com/danzel/miryoku_qmk/actions/workflows/build-danzel-keeb.yml Run workflow
Parts
https://keebd.com/en-nz/products/6x6x4-3mm-dip-push-button-switch https://keebd.com/products/24cm-dual-90-degree-nylon-3-5mm-to-3-5mm-male-trrs-cable https://keebd.com/products/trrs-3-5mm-female-jack-pj-320a https://keebd.com/products/helios-controller https://keebd.com/products/ambients-silent-linear-twilight-choc-switches
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | PG1350 | S1, S2, S3, S4, S5, S6, S7, S10, S11, S12, S13, S14, S15, S16, S17, S18 +2 | |
| 1 | TRRS-PJ-320A-dual | TRRS-PJ-320A-dual | TRRS1 |
The 19 most common of 21 parts.
Questions
How big is the Keeb PCB?
It measures 133.6 × 101.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Keeb use?
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Keeb KiCad files?
From the danzel/keeb repository on GitHub, at the commit this page was made from: the board is pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Keeb design in my own project?
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers171.2 × 72.9 mm
Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm
- 2 layers45.5 × 42.9 mm
Esphome han reader
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
21 parts915 - 2 layers31.8 × 14.5 mm
Esp prog
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
21 parts744MIT - 2 layers23.5 × 15.8 mm
QuiverAttachPCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
21 parts617CERN-OHL-S-2.0 - 2 layers69.9 × 41.3 mm
- 2 layers161.3 × 111.8 mm
