2 layers
T44-serial clock v4
danlil666/documentation
This is the starting point of me trying to use GitHub.
15 partsMIT
2 layers27.9 × 27.9 mm
T44-serial
danlil666/documentationThis is the starting point of me trying to use GitHub.
- Size
- 27.9 × 27.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 16
- Pads
- 36
- Tracks, vias
- 83, 3
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 9 Mar 2023
- Updated
- 31 Oct 2024
Overview
T44-serial is an open-source printed circuit board by danlil666, from the danlil666/documentation repository on GitHub, published under the MIT licence. It is a 2-layer board of 27.9 × 27.9 mm with 7 parts on 16 nets, routed with 83 tracks and 3 vias.
It is built around the ATTINY44A-SSU. Its parts include 3 connectors, 1 capacitor, 1 resistor, 1 IC and 1 crystal. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mddanlil666.github.io
Hello there!
This is the starting point of me trying to use GitHub.
The folder docs contains my attempt to trying to establish a project website for Prof. Nadya's class.
Hope you are having fun and see y'all there.
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0.1UF | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 10K | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | ATtiny44A-SSU | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMD | J2 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J1 |
| 1 | Resonator | Crystal:Resonator_SMD_muRata_CSTxExxV-3Pin_3.0x1.1mm_HandSoldering | Y1 |
Questions
How big is the T44-serial PCB?
It measures 27.9 × 27.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the T44-serial use?
7 parts, built around the ATTINY44A-SSU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the T44-serial KiCad files?
From the danlil666/documentation repository on GitHub, at the commit this page was made from: the board is files/project8/t44-serial.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the T44-serial design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from danlil666/documentation
3- 2 layers33.7 × 29.8 mm
Tiny44 motor revised
danlil666/documentation
This is the starting point of me trying to use GitHub.
13 partsMIT - 2 layers36.8 × 27.3 mm
Tiny44 ghost
danlil666/documentation
This is the starting point of me trying to use GitHub.
11 partsMIT
Similar boards
- 2 layers
Sv650 board
RaysceneNS/SV-650-GearPositionIndicator
This is a simple circuit that augments the second gen Suzuki SV650 to have a gear position indicator.
10 parts12 - 2 layers25.8 × 20 mm
TM Warthog Open Analog Slew
ServError/Thrustmaster_Warthog_Throttle_Alps_Slew_Mod
An open source replacement for the terrible TM Warthog Throttle slew stick
10 parts12 - 2 layers30.5 × 24.1 mm
- 2 layers50 × 50 mm
Attiny44-ring
TheBeachLab/alphabets
Open Source Mechanical Split Flap Display, AKA Solari display
21 parts134MIT - 2 layers
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT - 2 layers40 × 20 mm
- 2 layers19.8 × 30 mm
- 2 layers35.6 × 58.2 mm
Display Carrier
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
7 parts1.7kGPL-3.0