2 layers
T44-serial clock v4
danlil666/documentation
This is the starting point of me trying to use GitHub.
15 partsMIT
2 layers33.7 × 29.8 mm
Tiny44 motor revised
danlil666/documentationThis is the starting point of me trying to use GitHub.
- Size
- 33.7 × 29.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 17
- Pads
- 46
- Tracks, vias
- 69, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 9 Mar 2023
- Updated
- 31 Oct 2024
Overview
Tiny44 motor revised is an open-source printed circuit board by danlil666, from the danlil666/documentation repository on GitHub, published under the MIT licence. It is a 2-layer board of 33.7 × 29.8 mm with 13 parts on 17 nets, routed with 69 tracks and 0 vias.
It is built around the ATTINY44A-SSU and ZLDO1117GTA. Its parts include 5 connectors, 3 resistors, 2 ICs, 2 diodes and 1 capacitor. It belongs with the robots and motor control boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATTINY44A-SSU
SOP-14-40℃~+85℃ 1.8V~5.5V 10bit 12 20MHz 256Byte 256Byte 4KB 8 Bit AVR Built-in FLASH SOP-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
ZLDO1117GTA
SOT-223-4-40℃~+125℃@(Tj) 1 1.2V@(1A) 1.2V~5V 10mA 18V 1A 80dB@(120Hz) Adjustable Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mddanlil666.github.io
Hello there!
This is the starting point of me trying to use GitHub.
The folder docs contains my attempt to trying to establish a project website for Prof. Nadya's class.
Hope you are having fun and see y'all there.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 2 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J5 |
| 2 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3, J4 |
| 2 | LED | LED_SMD:LED_1206_3216Metric | D1, D2 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 4.7 uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | ATtiny44A-SSU | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMD | J2 |
| 1 | ZLDO1117 | Package_TO_SOT_SMD:SOT-223 | U1 |
Questions
How big is the Tiny44 motor revised PCB?
It measures 33.7 × 29.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tiny44 motor revised use?
13 parts, built around the ATTINY44A-SSU and ZLDO1117GTA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tiny44 motor revised KiCad files?
From the danlil666/documentation repository on GitHub, at the commit this page was made from: the board is files/project7/Tiny44_motor_revised.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tiny44 motor revised design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from danlil666/documentation
3- 2 layers36.8 × 27.3 mm
Tiny44 ghost
danlil666/documentation
This is the starting point of me trying to use GitHub.
11 partsMIT - 2 layers27.9 × 27.9 mm
Similar boards
- 2 layers
Sv650 board
RaysceneNS/SV-650-GearPositionIndicator
This is a simple circuit that augments the second gen Suzuki SV650 to have a gear position indicator.
10 parts12 - 2 layers25.8 × 20 mm
TM Warthog Open Analog Slew
ServError/Thrustmaster_Warthog_Throttle_Alps_Slew_Mod
An open source replacement for the terrible TM Warthog Throttle slew stick
10 parts12 - 2 layers30.5 × 24.1 mm
- 2 layers50 × 50 mm
Attiny44-ring
TheBeachLab/alphabets
Open Source Mechanical Split Flap Display, AKA Solari display
21 parts134MIT - 2 layers99.8 × 99.8 mm
Stmbl 5.0
freakontrol/stmbl
THE AUTHORS OF THIS SOFTWARE ACCEPT ABSOLUTELY NO LIABILITY FOR ANY HARM OR LOSS RESULTING FROM ITS USE. IT IS EXTREMELY UNWISE TO RELY ON SOFTWARE ALONE FOR SAFETY.
432 parts53GPL-3.0 - 2 layers78 × 50.7 mm
- 2 layers84.6 × 84.6 mm
- 4 layers80 × 51 mm
