2 layers100 × 88 mm
4 layers84.5 × 92 mm
DriverDeskTft
danielvilas/DigitalTrainsDigital Trains
- Size
- 84.5 × 92 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 65
- Pads
- 259
- Tracks, vias
- 503, 82
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 14 Feb 2019
- Updated
- 2 Mar 2025
Overview
DriverDeskTft is an open-source printed circuit board by danielvilas, from the danielvilas/DigitalTrains repository on GitHub, published under the MIT licence. It is a 4-layer board of 84.5 × 92 mm with 67 parts on 65 nets, routed with 503 tracks and 82 vias.
It is built around the AMS1117-3.3, S5B-PH-SM4-TB and SS14. Its parts include 24 resistors, 13 switches, 11 capacitors, 4 connectors and 3 ICs. It belongs with the STM32 boards of this library.
Main components
3
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
S5B-PH-SM4-TB
SMD,P=2mm,5PUncategorisedJST
SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdDigitalTrains
Digital Trains is a repository for storing and sharing my DCC/LCC setups
Up to Date this contians Circuits, boards and projects usefull for my model layout. Each folder is a project I started. some are finished, others are Work In Progress
| Folder | Description | Status1 |
|---|---|---|
| ArduinoDCC++ | Board for use whit DCC++ | Deprecated for DccBlocks |
| Breaker | DC breaker board, shorts protections | Frozen, no need on DCC2 |
| dcc-turnout | Board to control a turnout with servo | Alive - prototype phase |
| dcc-turnout-config | Tool to configure the dcc-turnout boards | Alive - conceptual design |
| DccBlocks | Components to create a DCC system whit DCC++. Has subprojects | Stall - currently works, needs update to DCC++EX |
| docs | Different documents may be usefull | Alive - Slow |
| Esp32Lcc | Use an ESP32 as node for LCC | Stall - Reading about |
| Interfaces | Reference Designs to add conectivity | Done - until new needs |
| kibot | Yaml Config for kibot scripts.. | Done - until new needs |
| Libs | KiCad Libraries | WIP |
| MimicPanel | Hardware and software to create Mimic Panels | WIP |
| pcbdraw | PcbDraw Library | WIP |
| STM32103_Devel | STM32F103 Custom board | Depecated for refenece repository |
Versioning
First projects uses a folder per version system, easy to follow, easy to view older versions, but mess the file system.
Current system based on tags, and the creation of doc directories with PDFs of the schematic and the layers.
Tags of projects
- db_dt_VERSION -> DccBlocks/Detection
- dt_VERSION -> DccTurnout
- dt_ms_VERSION -> DccTurnout/Modules/ServoPmosModule
- db_abc_stop_VERSION -> DccBlocks/ABC/AbcStop
- db_pd_VERSION -> DccBlocks/DccPowerDistribution
- i_lb_esp32_VERSION -> Interfaces/LocoBufferEsp32/board/LocoBufferEsp32
- i_lb_esp32_c_VERSION -> Interfaces/LocoBufferEsp32/board/LocoBufferEsp32Craddle
Footnotes
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 10K | Resistor_SMD:R_0805_2012Metric | R102, R103, R201, R202, R203, R204, R205, R206, R207, R208, R209, R210, R211, R212, R213, R214 +3 |
| 11 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW201, SW202, SW203, SW204, SW205, SW206, SW207, SW208, SW209, SW210, SW211 |
| 5 | 100nf | Capacitor_SMD:C_0805_2012Metric | C401, C402, C403, C404, C405 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad | H1, H2, H3, H4 |
| 2 | 10pf | Capacitor_SMD:C_0805_2012Metric | C409, C410 |
| 2 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C301, C302 |
| 2 | 20 | Resistor_SMD:R_0805_2012Metric | R303, R304 |
| 2 | 20pf | Capacitor_SMD:C_0805_2012Metric | C407, C408 |
| 2 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP101, JP102 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP401, JP402 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric | R301 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R101 |
| 1 | 1K5 | Resistor_SMD:R_0805_2012Metric | R302 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y402 |
| 1 | 8MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y401 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U301 |
| 1 | Conn_01x06_P1.27 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J401 |
| 1 | Conn_02x05 Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J402 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D101 |
| 1 | PTS526 | DigitalTrains:SW_PTS526_SM08_SMTR2_LFS | SW401 |
| 1 | RotaryEncoder_Switch | DigitalTrains:XDCR_PEC11R-4215F-S0024 | SW212 |
| 1 | S5B-PH-SM4-TB | Connector_JST:JST_PH_S5B-PH-SM4-TB_1x05-1MP_P2.00mm_Horizontal | J101 |
| 1 | STM32F103CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U401 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10118193-0001LF_Horizontal | J301 |
| 1 | ss14 | Diode_SMD:D_SMA | D301 |
| 1 | ~ | DigitalTrains:TFT 1.8 SPI | U1 |
Questions
How big is the DriverDeskTft PCB?
It measures 84.5 × 92 mm and has 4 copper layers, 1.6 mm thick.
What parts does the DriverDeskTft use?
67 parts, built around the AMS1117-3.3, S5B-PH-SM4-TB and SS14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DriverDeskTft KiCad files?
From the danielvilas/DigitalTrains repository on GitHub, at the commit this page was made from: the board is MimicPanel/DriverDesk/DriverDeskTft/DriverDeskTft.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DriverDeskTft design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from danielvilas/DigitalTrains
12- 2 layers70 × 67.5 mm
- 4 layers95 × 46 mm
- 2 layers100 × 88 mm
- 2 layers100 × 88 mm
- 4 layers95 × 30 mm
- 4 layers95 × 30 mm
- 2 layers70 × 52.5 mm
- 4 layers75 × 50 mm
- 4 layers69 × 50 mm
- 2 layers100 × 50 mm
- 2 layers100 × 50 mm
Similar boards
- 4 layers57 × 33 mm
Sensor pcb
nichlock/open-linear-scale
Open-source capacitive linear encoder / DIY DRO scale: KiCad PCBs, STM32 firmware, and test data. Same principle as digital calipers.
69 parts73 - 2 layers30 × 21.1 mm
Rp2040 stamp sculpt interface
techberet/msft_sculpt_rp2040_stamp_hw
Lots of details available in my (rather long) blog post.
8 parts9MIT - 4 layers
- 4 layers72.6 × 170 mm
OpenJBOD RP2040
OpenJBOD/rp2040
This repository contains the hardware design files OpenJBOD RP2040 Baseboard.
129 parts87CERN-OHL-P-2.0 - 2 layers90.2 × 90 mm
Sra dev board 2026
SRA-VJTI/sra-board-hardware-design
ESP32-based Development Board for Robotics and Embedded Applications
219 parts81MIT - 2 layers55 × 100 mm
- 2 layers40 × 68 mm
MULTIGW
nuclearcat/ESP32ETH
Simple ESP32 with native ethernet using LAN8720 phy, Arduino compatible
32 parts30LGPL-2.1 - 4 layers44.5 × 22.5 mm
