

PowerDistribution
Digital Trains
- Size
- 95 × 46 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 84
- Nets
- 41
- Pads
- 177
- Tracks, vias
- 262, 43
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 14 Feb 2019
- Updated
- 2 Mar 2025
Overview
PowerDistribution is an open-source printed circuit board by danielvilas, from the danielvilas/DigitalTrains repository on GitHub, published under the MIT licence. It is a 4-layer board of 95 × 46 mm with 84 parts on 41 nets, routed with 262 tracks and 43 vias.
It is built around the TPS54331D, 6N137S1(TA) and AMS1117-3.3, with the SK34B, BC817 and BC857 among its other parts. Its parts include 16 capacitors, 15 resistors, 12 diodes, 8 connectors and 4 ICs.
Main components
7TPS54331D
SOIC-8-40℃~+150℃@(TJ) 1 110uA 3.5V~28V 3A 570kHz 800mV~25V Adjustable Buck Buck Built-in No SOIC-8 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters6N137S1(TA)
SOP-8-2.54mm-40℃~+85℃ 1 1.4V 100mW 10Mbps 10kV/us 4.5V~5.5V 5kV 5mA 75ns 75ns DC SOP-8-2.54mm Logic Output Optoisolators ROHSEverlight ElectronicsOptocouplersAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSK34B
SMB(DO-214AA)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A 80A Independent SMB(DO-214AA) Schottky Diodes ROHSMDDSchottky DiodesBC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)BC857
SOT-231 PNP 100MHz 100mA 15nA 200mW 45V 5V 650mV 800 PNP SOT-23 Bipolar (BJT) ROHSSTMicroelectronicsBipolar (BJT)BSS308PE
SOT23-3-30V, -2A, P-Channel OptiMOS P3 Small-Signal-TransistorInfineon TechnologiesUncategorised
README
README.mdDigitalTrains
Digital Trains is a repository for storing and sharing my DCC/LCC setups
Up to Date this contians Circuits, boards and projects usefull for my model layout. Each folder is a project I started. some are finished, others are Work In Progress
| Folder | Description | Status1 |
|---|---|---|
| ArduinoDCC++ | Board for use whit DCC++ | Deprecated for DccBlocks |
| Breaker | DC breaker board, shorts protections | Frozen, no need on DCC2 |
| dcc-turnout | Board to control a turnout with servo | Alive - prototype phase |
| dcc-turnout-config | Tool to configure the dcc-turnout boards | Alive - conceptual design |
| DccBlocks | Components to create a DCC system whit DCC++. Has subprojects | Stall - currently works, needs update to DCC++EX |
| docs | Different documents may be usefull | Alive - Slow |
| Esp32Lcc | Use an ESP32 as node for LCC | Stall - Reading about |
| Interfaces | Reference Designs to add conectivity | Done - until new needs |
| kibot | Yaml Config for kibot scripts.. | Done - until new needs |
| Libs | KiCad Libraries | WIP |
| MimicPanel | Hardware and software to create Mimic Panels | WIP |
| pcbdraw | PcbDraw Library | WIP |
| STM32103_Devel | STM32F103 Custom board | Depecated for refenece repository |
Versioning
First projects uses a folder per version system, easy to follow, easy to view older versions, but mess the file system.
Current system based on tags, and the creation of doc directories with PDFs of the schematic and the layers.
Tags of projects
- db_dt_VERSION -> DccBlocks/Detection
- dt_VERSION -> DccTurnout
- dt_ms_VERSION -> DccTurnout/Modules/ServoPmosModule
- db_abc_stop_VERSION -> DccBlocks/ABC/AbcStop
- db_pd_VERSION -> DccBlocks/DccPowerDistribution
- i_lb_esp32_VERSION -> Interfaces/LocoBufferEsp32/board/LocoBufferEsp32
- i_lb_esp32_c_VERSION -> Interfaces/LocoBufferEsp32/board/LocoBufferEsp32Craddle
Footnotes
Parts
84| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11 |
| 6 | 10uf | Capacitor_SMD:C_1206_3216Metric | C3, C5, C7, C11, C12, C13 |
| 6 | SK34B | Diode_SMD:D_SMB | D2, D9, D10, D11, D12, D13 |
| 4 | 100K | Resistor_SMD:R_1206_3216Metric | R7, R8, R14, R15 |
| 4 | Jumper_NC | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 100uf | Capacitor_SMD:CP_Elec_6.3x7.7 | C14, C15, C16 |
| 3 | 10uf | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C1, C2, C4 |
| 3 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP5, JP6, JP7 |
| 3 | LED | LED_SMD:LED_1206_3216Metric | D4, D5, D6 |
| 3 | Screw_01x02_blue | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J4, J5, J6 |
| 2 | 100 | Resistor_SMD:R_1206_3216Metric | R1, R10 |
| 2 | 10K | Resistor_SMD:R_1206_3216Metric | R4, R5 |
| 2 | 1N4148 | Diode_SMD:D_SOD-323_HandSoldering | D1, D8 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP8, JP9 |
| 1 | 1.96K | Resistor_SMD:R_1206_3216Metric | R13 |
| 1 | 10.2K | Resistor_SMD:R_1206_3216Metric | R12 |
| 1 | 100nf | Capacitor_SMD:C_1206_3216Metric | C10 |
| 1 | 10pf | Capacitor_SMD:C_1206_3216Metric | C6 |
| 1 | 1K | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | 200 | Resistor_SMD:R_1206_3216Metric | R9 |
| 1 | 22uH | Project:L_Bourns_SRP1035 | L1 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | 3k | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | 5.62K | Resistor_SMD:R_1206_3216Metric | R11 |
| 1 | 5.6nf | Capacitor_SMD:C_1206_3216Metric | C8 |
| 1 | 6N137S1 | Package_DIP:SMDIP-8_W9.53mm | U2 |
| 1 | 8.2nf | Capacitor_SMD:C_1206_3216Metric | C9 |
| 1 | 900 | Resistor_SMD:R_1206_3216Metric | R6 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | BC857 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | BSS308 | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | DcJackSW | Connector_BarrelJack:BarrelJack_Horizontal | J2 |
| 1 | JST_01x02 | Connector_JST:JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal | J1 |
| 1 | JST_01x04 | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J7 |
| 1 | PC817 | Package_DIP:SMDIP-4_W9.53mm | U3 |
| 1 | Pin_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | SS24A+ | Diode_SMD:D_SMA | D7 |
| 1 | Screw_01x02_Black | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J8 |
| 1 | TPS54331D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
More from danielvilas/DigitalTrains
12- 2 layers100 × 88 mm

- 2 layers70 × 67.5 mm

- 2 layers100 × 88 mm

- 2 layers100 × 88 mm

- 4 layers84.5 × 92 mm

- 4 layers95 × 30 mm

- 4 layers95 × 30 mm

- 2 layers70 × 52.5 mm

- 4 layers75 × 50 mm

- 4 layers69 × 50 mm

- 2 layers100 × 50 mm

- 2 layers100 × 50 mm

Similar boards
- 2 layers20 × 106 mm

Toepler plus
niektb/sluisbrinkie-eurorack-published
Published Modules of the Sluisbrinkie project
112 parts34 - 2 layers85.4 × 56.5 mm

- 4 layers133.3 × 58.2 mm

ESP32-Based Power Monitoring System
mirjunaid/ESP32-Based-Power-Monitoring-System
Power Monitoring system based on esp32 with a OLED display.
161 parts - 4 layers185 × 110 mm

Bd845-pwb
bluedot-arcade/bd845-pwb-board
A clone of the original Konami GN845-PWB(B) Stage I/O board for DDR machines.
186 parts4CERN-OHL-S-2.0 - 2 layers0.7 × 0.5 mm

- 2 layers63 × 37 mm

OpenDrone Transmitter F103 HW
phonght32/OpenDrone_HW_Transmitter_F103
OpenDrone Project - Transmitter hardware using STM32F103.
87 parts1MIT - 2 layers73.5 × 92.8 mm

- 4 layers124.4 × 115.3 mm

6axis robot
HexFud/HexArm
I created this 6 axis robotic arm entirely from scratch starting from the PCB to the 3D modelling and designing.
97 parts
Questions
How big is the PowerDistribution PCB?
It measures 95 × 46 mm and has 4 copper layers, 1.6 mm thick.
What parts does the PowerDistribution use?
84 parts, built around the TPS54331D, 6N137S1(TA), AMS1117-3.3 and SK34B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PowerDistribution KiCad files?
From the danielvilas/DigitalTrains repository on GitHub, at the commit this page was made from: the board is DccBlocks/DccPowerDistribution/board/PowerDistribution.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PowerDistribution design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).