
ESP drone
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

ET4277 + ET4391 TU Delft Courses + Research
Tud microled v2 is an open-source printed circuit board by danieltyukov, from the danieltyukov/tud-micro-led-bonding-categorization repository on GitHub. It is a 2-layer board of 93 × 93 mm with 130 parts on 164 nets, routed with 220 tracks and 18 vias.
It is built around the NTCG104BH103HT1 and TSW-140-07-G-S.
Status: fab-ready. DRC clean (0 violations, 0 unconnected, 0 schematic-parity). Workflow: Eurocircuits PCB + PCBA-proto, all 3 BOM lines set to "Place on board" so the 4 NTC + 1 R + 2 header strips are reflowed / soldered by Eurocircuits. F.Paste has 10 apertures (NTC + R only); the 26 LED footprints stay paste-free and ship as bare ENIG gold for cleanroom bonding at TU Delft EKL.
FABRICATION_ORDER.mdV2_DESIGN_NOTES.mdPCB_DESIGN_PLAN.mdELECTRICAL_CHARACTERIZATION.mdPUBLICATION_CONTRIBUTION.mdnew-pcb/
├── tud-microled-v2.kicad_pro KiCad 9.0.8 project
├── tud-microled-v2.kicad_pcb PCB layout (130 footprints, DRC clean)
├── tud-microled-v2.kicad_sch single-sheet A2 schematic
├── PCB_DESIGN_PLAN.md original design spec
├── V2_DESIGN_NOTES.md as-built notes
├── VERIFICATION_v4.md electrical-characterization verification
├── ELECTRICAL_CHARACTERIZATION.md measurement plan + lab tools
├── FABRICATION_ORDER.md Eurocircuits "Place loose" order checklist
├── PUBLICATION_CONTRIBUTION.md v2 contributions vs ECTC 2025
├── library/ Würth WL-SFCC LED symbol/footprint/3D
├── tools/ Python helpers (PCB patcher, BOM generator)
└── fab/ gerbers, BOM, pos, PDFs, STEP, top.png
├── tud-microled-v2-fab-bom.csv BOM with TDK + Yageo + Samtec MPNs (Mouser PNs included)
├── tud-microled-v2-fab-bom-assembly-only.csv slim BOM (the 3 assembled rows only)
├── tud-microled-v2-pos.csv 7 placements
├── tud-microled-v2-top.pdf / -bot.pdf visual review
├── tud-microled-v2-gerbers.zip 26-file gerber + drill bundle
├── tud-microled-v2.step 3D model
└── preview/top.png 1600×1600 raytraced render| Board | 93 × 93 mm, 2-layer FR-4, 1.55 mm |
| Finish | ENIG (Ni 4 µm / Au 0.075 µm) |
| Min track / clearance | 0.20 / 0.30 mm (Eurocircuits Class 4 minimum is 0.15 mm) |
| Min drill / annular ring | 0.30 / 0.15 mm |
| Footprints on board | 130 (1 R + 4 NTC + 2 multi-pin headers + 26 LEDs DNP) |
| Distinct components | 3 (Yageo R, TDK NTC, Samtec header) |
| Placements per board (assembled) | 7 (1 R + 4 NTC + 2 header strips) |
| LED bonding | 26 × Würth WL-SFCC RGB at customer cleanroom (Tresky T-3000-PRO) |
| Solder-paste apertures | 10 on F.Paste (4 NTC × 2 + 1 R × 2). B.Paste empty. 26 LED footprints intentionally paste-free. |
3 distinct part numbers — all stocked at Mouser EU (1-day NL delivery) and resolvable through Eurocircuits' supplier scanner:
| Ref(s) | Manufacturer | MPN | Mouser PN |
|---|---|---|---|
| R_EIS_LOAD | Yageo | RT0603BRB07100RL | 603-RT0603BRB07100RL |
| H_N + H_S | Samtec | TSW-140-07-G-S | 200-TSW14007GS |
| TH1..TH4 | TDK | NTCG104BH103HT1 | 810-NTCG104BH103HT1 |
tud-microled-v2.kicad_pro in KiCad 9.0 or newer.WE_3DMODEL_DIR is set in Preferences → Configure Paths (see library/README.md).kicad-cli pcb drc tud-microled-v2.kicad_pcb and kicad-cli sch erc tud-microled-v2.kicad_sch — both should report 0 violations.kicad-cli pcb export gerbers --output fab/gerbers/ tud-microled-v2.kicad_pcbkicad-cli pcb export drill --output fab/gerbers/ tud-microled-v2.kicad_pcbkicad-cli pcb export pos --format csv --units mm --use-drill-file-origin --output fab/tud-microled-v2-pos.csv tud-microled-v2.kicad_pcbkicad-cli pcb export pdf --layers F.Cu,F.Silkscreen,F.Mask,Edge.Cuts -o fab/tud-microled-v2-top.pdf tud-microled-v2.kicad_pcbkicad-cli pcb render --side top --width 1600 --height 1600 --quality high --output fab/preview/top.png tud-microled-v2.kicad_pcbpython3 tools/gen_fab_bom.py to refresh the BOM CSV(cd fab/gerbers && zip -q ../tud-microled-v2-gerbers.zip *) to rebundle for Eurocircuits| Script | Purpose |
|---|---|
gen_fab_bom.py | Reads fab/tud-microled-v2-pos.csv, emits tud-microled-v2-fab-bom.csv + slim variant |
patch_aisler_mpns.py | Adds Manufacturer + MPN custom fields to each footprint so any fab auto-detects them |
consolidate_pcb.py | One-time refactor that collapsed 64 single-pin headers into 2 multi-pin strips and deleted the 123 bare-pad design-only footprints |
strip_all_paste.py | Removes F.Paste / B.Paste from every pad in the design (used for the loose-components workflow) |
clean_dangling.py | Removes orphan tracks/vias left over by consolidate_pcb.py |
unify_values.py | Sets the Value field of every footprint to its MPN so Aisler/EC Grouped views collapse them properly |
inspect_headers.py | Read-only debug helper |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | WL-SFCC RGB (DNP) | WL-SFCC_0404 | D1, D2, D3, D4, D5, D6, D7, D8, DCL12_L1, DCL12_L2, DCL12_L3, DCL12_L4, DCL12_L5, DCL12_L10, DCL12_L11, DCL12_L12 +10 |
| 4 | NTCG104BH103HT1 | NTC_0402 | TH1, TH2, TH3, TH4 |
| 2 | TSW-140-07-G-S | Header_2.54mm | H_N, H_S |
| 1 | BP_R1C1 | BondPad_DoE | BP_R1C1 |
| 1 | BP_R1C2 | BondPad_DoE | BP_R1C2 |
| 1 | BP_R1C3 | BondPad_DoE | BP_R1C3 |
| 1 | BP_R1C4 | BondPad_DoE | BP_R1C4 |
| 1 | BP_R1C5 | BondPad_DoE | BP_R1C5 |
| 1 | BP_R1C6 | BondPad_DoE | BP_R1C6 |
| 1 | BP_R2C1 | BondPad_DoE | BP_R2C1 |
| 1 | BP_R2C2 | BondPad_DoE | BP_R2C2 |
| 1 | BP_R2C3 | BondPad_DoE | BP_R2C3 |
| 1 | BP_R2C4 | BondPad_DoE | BP_R2C4 |
| 1 | BP_R2C5 | BondPad_DoE | BP_R2C5 |
| 1 | BP_R2C6 | BondPad_DoE | BP_R2C6 |
| 1 | BP_R3C1 | BondPad_DoE | BP_R3C1 |
| 1 | BP_R3C2 | BondPad_DoE | BP_R3C2 |
| 1 | BP_R3C3 | BondPad_DoE | BP_R3C3 |
| 1 | BP_R3C4 | BondPad_DoE | BP_R3C4 |
| 1 | BP_R3C5 | BondPad_DoE | BP_R3C5 |
| 1 | BP_R3C6 | BondPad_DoE | BP_R3C6 |
| 1 | BP_R4C1 | BondPad_DoE | BP_R4C1 |
| 1 | BP_R4C2 | BondPad_DoE | BP_R4C2 |
| 1 | BP_R4C3 | BondPad_DoE | BP_R4C3 |
| 1 | BP_R4C4 | BondPad_DoE | BP_R4C4 |
| 1 | BP_R4C5 | BondPad_DoE | BP_R4C5 |
| 1 | BP_R4C6 | BondPad_DoE | BP_R4C6 |
| 1 | BP_R5C1 | BondPad_DoE | BP_R5C1 |
| 1 | BP_R5C2 | BondPad_DoE | BP_R5C2 |
| 1 | BP_R5C3 | BondPad_DoE | BP_R5C3 |
| 1 | BP_R5C4 | BondPad_DoE | BP_R5C4 |
| 1 | BP_R5C5 | BondPad_DoE | BP_R5C5 |
| 1 | BP_R5C6 | BondPad_DoE | BP_R5C6 |
| 1 | BP_R6C1 | BondPad_DoE | BP_R6C1 |
| 1 | BP_R6C2 | BondPad_DoE | BP_R6C2 |
| 1 | BP_R6C3 | BondPad_DoE | BP_R6C3 |
| 1 | BP_R6C4 | BondPad_DoE | BP_R6C4 |
| 1 | BP_R6C5 | BondPad_DoE | BP_R6C5 |
| 1 | BP_R6C6 | BondPad_DoE | BP_R6C6 |
| 1 | FID1 | Fiducial_1mm | FID1 |
| 1 | FID2 | Fiducial_1mm | FID2 |
| 1 | FID3 | Fiducial_1mm | FID3 |
| 1 | FID4 | Fiducial_1mm | FID4 |
| 1 | PP_D1_A | Probe_1.27mm | PP_D1_A |
| 1 | PP_D1_KB | Probe_1.27mm | PP_D1_KB |
| 1 | PP_D1_KG | Probe_1.27mm | PP_D1_KG |
| 1 | PP_D1_KR | Probe_1.27mm | PP_D1_KR |
| 1 | PP_D2_A | Probe_1.27mm | PP_D2_A |
| 1 | PP_D2_KB | Probe_1.27mm | PP_D2_KB |
| 1 | PP_D2_KG | Probe_1.27mm | PP_D2_KG |
| 1 | PP_D2_KR | Probe_1.27mm | PP_D2_KR |
| 1 | PP_D3_A | Probe_1.27mm | PP_D3_A |
| 1 | PP_D3_KB | Probe_1.27mm | PP_D3_KB |
| 1 | PP_D3_KG | Probe_1.27mm | PP_D3_KG |
| 1 | PP_D3_KR | Probe_1.27mm | PP_D3_KR |
| 1 | PP_D4_A | Probe_1.27mm | PP_D4_A |
| 1 | PP_D4_KB | Probe_1.27mm | PP_D4_KB |
| 1 | PP_D4_KG | Probe_1.27mm | PP_D4_KG |
| 1 | PP_D4_KR | Probe_1.27mm | PP_D4_KR |
| 1 | PP_D5_A | Probe_1.27mm | PP_D5_A |
| 1 | PP_D5_KB | Probe_1.27mm | PP_D5_KB |
| 1 | PP_D5_KG | Probe_1.27mm | PP_D5_KG |
| 1 | PP_D5_KR | Probe_1.27mm | PP_D5_KR |
| 1 | PP_D6_A | Probe_1.27mm | PP_D6_A |
| 1 | PP_D6_KB | Probe_1.27mm | PP_D6_KB |
| 1 | PP_D6_KG | Probe_1.27mm | PP_D6_KG |
| 1 | PP_D6_KR | Probe_1.27mm | PP_D6_KR |
| 1 | PP_D7_A | Probe_1.27mm | PP_D7_A |
| 1 | PP_D7_KB | Probe_1.27mm | PP_D7_KB |
| 1 | PP_D7_KG | Probe_1.27mm | PP_D7_KG |
| 1 | PP_D7_KR | Probe_1.27mm | PP_D7_KR |
| 1 | PP_D8_A | Probe_1.27mm | PP_D8_A |
| 1 | PP_D8_KB | Probe_1.27mm | PP_D8_KB |
| 1 | PP_D8_KG | Probe_1.27mm | PP_D8_KG |
| 1 | PP_D8_KR | Probe_1.27mm | PP_D8_KR |
| 1 | PP_DCL12_IN | Probe_1.27mm | PP_DCL12_IN |
| 1 | PP_DCL12_OUT | Probe_1.27mm | PP_DCL12_OUT |
| 1 | PP_DCL6_IN | Probe_1.27mm | PP_DCL6_IN |
| 1 | PP_DCL6_OUT | Probe_1.27mm | PP_DCL6_OUT |
| 1 | PP_EIS_OPEN_A | Probe_1.27mm | PP_EIS_OPEN_A |
The 109 most common of 130 parts.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!






sadekbaroudi/euclid36
At the time of creation, using Kicad 5.1.9 - This may not work with future versions

It measures 93 × 93 mm and has 2 copper layers, 1.6 mm thick.
130 parts, built around the NTCG104BH103HT1 and TSW-140-07-G-S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the danieltyukov/tud-micro-led-bonding-categorization repository on GitHub, at the commit this page was made from: the board is new-pcb/tud-microled-v2.kicad_pcb and its schematic new-pcb/tud-microled-v2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask danieltyukov before reusing the design.