6 layers168.6 × 242.3 mm
4 layers140 × 85 mm
LoadController
DanielPopa1109/ELC- Size
- 140 × 85 mm
- Copper layers
- 4
- Thickness
- 2 mm
- Parts
- 84
- Nets
- 42
- Pads
- 310
- Tracks, vias
- 1,121, 1,268
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 23 May 2025
- Updated
- 2 Nov 2026
Overview
LoadController is an open-source printed circuit board by DanielPopa1109, from the DanielPopa1109/ELC repository on GitHub. It is a 4-layer board of 140 × 85 mm with 84 parts on 42 nets, routed with 1,121 tracks and 1,268 vias.
It is built around the LTC7001IMSE#PBF, ACS758LCB-100B-PFF-T and BAT54S, with the SMBJ33A and MMBT3904 among its other parts. Its parts include 35 resistors, 16 capacitors, 14 diodes, 7 transistors and 4 ICs. It belongs with the STM32 boards of this library.
Main components
5
LTC7001IMSE#PBF
MSOP-10-EP-40℃~+125℃ 1 1.3V~1.8V 1.7V~2.2V 13ns 13ns 225uA 3.5V~15V 35ns 35ns High Side MOSFET Under Voltage Protection、Overtemperature protection (OTP) MSOP-10-EP Gate Drivers ROHSAnalog DevicesGate Drivers
ACS758LCB-100B-PFF-T
CB-2-3-40℃~+150℃ 1.5mΩ 100A 120kHz 20mV/A 3V~5.5V 4800Vrms 4us Overcurrent Protection、Bidirectional detection、Under-voltage lockout、Power-on reset Support CB-2-3 Current Sensors ROHSJSMSEMICurrent Sensors
BAT54S
SOT-231 Pair Series Connection 1V@100mA 200mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSMDDSchottky Diodes
SMBJ33A
DO-214AA(SMB)-55℃~+150℃ 11.26A@10/1000us 33V 40.6V 53.3V 5uA 600W@10/1000us IEC 61000-4-2 TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)MMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
Parts
84| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10R | ELC:2512 | R30, R31, R32, R33, R34 |
| 5 | 2M2 | ELC:0805 | R25, R26, R27, R28, R29 |
| 4 | 100nF | ELC:0805 | C40, C41, C42, C45 |
| 4 | 1k | ELC:0805 | R41, R44, R47, R48 |
| 4 | 47k | ELC:0805 | R11, R12, R13, R52 |
| 4 | 4R7 | ELC:0805 | R21, R22, R23, R24 |
| 4 | BAT54S | ELC:SOT23 | D20, D21, D22, D23 |
| 3 | 100nF 16V | ELC:0805 | C14, C15, C16 |
| 3 | 1uF 25V X7R | ELC:0805 | C11, C12, C13 |
| 3 | BAV21W 200V | ELC:SOD123 | D11, D12, D13 |
| 3 | LTC7001IMSE#PBF | ELC:MSOP10_EP | U1, U2, U3 |
| 3 | SS110 100V | ELC:SMA | D14, D15, D16 |
| 2 | 100k | ELC:0805 | R50, R53 |
| 2 | 100k 0.1% | ELC:0805 | R42, R45 |
| 2 | 10k | ELC:0805 | R3, R54 |
| 2 | 10k 0.1% | ELC:0805 | R43, R46 |
| 2 | 10k 1% | ELC:0805 | R1, R40 |
| 2 | 10nF | ELC:0805 | C43, C44 |
| 2 | BSS123 100V | ELC:SOT23 | Q5, Q6 |
| 2 | IPT008N06NM5LF | ELC:TOLL_L | Q2, Q4 |
| 2 | IPT008N06NM5LF | ELC:TOLL_R | Q1, Q3 |
| 2 | SMBJ33A | ELC:SMA | D1, D2 |
| 2 | SS110 100V 1A | ELC:SMA | D3, D4 |
| 1 | 1000uF 63V 105C EEU-FS1J102 | ELC:Radial_D16_P7.5 | C1 |
| 1 | 100nF 10V | ELC:0805 | C4 |
| 1 | 10k NTC B3950 125C | ELC:0805 | TH1 |
| 1 | 10uF 10V X7R | ELC:1206 | C3 |
| 1 | 1uF 63V X7R | ELC:1206 | C2 |
| 1 | 20k 1% | ELC:0805 | R2 |
| 1 | 33k | ELC:0805 | R51 |
| 1 | 500mA 125V FUSE | ELC:1206 | F1 |
| 1 | ACS758LCB-100B-PFF | Sensor_Current:Allegro_CB_PFF | U4 |
| 1 | CANH CANL GND WAKE | ELC:Terminal_1x4_P5.08 | J3 |
| 1 | DNP | ELC:0805 | R49 |
| 1 | LM2596 MODULE / SET 5.00V / ESTIMATED | ELC:ESTIMATED_LM2596_43x21 | M2 |
| 1 | MMBT3904 | ELC:SOT23 | Q7 |
| 1 | OUTPUT / M8 | ELC:Terminal | J2 |
| 1 | STM32F103C8T6 BLUE PILL / ESTIMATED | ELC:ESTIMATED_BluePill_53x23 | M1 |
| 1 | T30 / M8 | ELC:Terminal | J1 |
| 1 | TJA1051T MODULE / ESTIMATED | ELC:ESTIMATED_TJA1051_20x15.5 | M4 |
Questions
How big is the LoadController PCB?
It measures 140 × 85 mm and has 4 copper layers, 2 mm thick.
What parts does the LoadController use?
84 parts, built around the LTC7001IMSE#PBF, ACS758LCB-100B-PFF-T, BAT54S and SMBJ33A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LoadController KiCad files?
From the DanielPopa1109/ELC repository on GitHub, at the commit this page was made from: the board is Tool/Documentation/HW/Rev A/LoadController.kicad_pcb and its schematic Tool/Documentation/HW/Rev A/Drivers.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LoadController design in my own project?
Its repository states no licence, so its author keeps all rights: ask DanielPopa1109 before reusing the design.
Similar boards
- 2 layers65 × 35 mm
Odri power board
open-dynamic-robot-initiative/power-board
Power Management and distribution board for Open Dynamic Robot Initiative Robots
55 parts13BSD-2-Clause - 4 layers240 × 90.5 mm
BILLEE Rover Control Module V1
BILLEE-BroncoSTAR/billee-hardware-2027
Hardware and firmware Repository for BILLEE URC 2027
276 parts1MIT - 2 layers100 × 100 mm
AquaPCB
schwabix-1311/aquaPCB
Open-hardware Raspberry Pi base board for aquaPi software. 12 V supply; six 5 A MOSFET outputs for LED lamps and fans (2 with hardware PWM); 4 SSR/relay drivers; protected inputs; 1-Wire; ADS1115 with a pH amplifier on…
158 partsCERN-OHL-S-2.0 - 4 layers130 × 100 mm
IDM RoomSensor ESP B ES4-AIR
Xerolux/IDM-Smart-Climate-Platform
Diese Platine empfängt Temperatur- und Feuchtewerte aus Home Assistant und simuliert gegenüber der IDM AERO ALM den originalen Temperatur-/Feuchtesensor.
111 parts - 4 layers74 × 90 mm
Bay node
kartben/hw-testing-rack
3D-printed, tilted test shelf for 16 dev boards: sliding drawers, per-bay ESP32-S3 running Zephyr (USB/IP, power switching, metering), KiCad PCBs, OpenSCAD parts, BOM and an interactive 3D viewer
135 parts - 2 layers120 × 90 mm
PLC STM32 Modbus
danhmanu/PLC-STM32F407VET6
Mạch nguyên lý KiCad 10 cho bộ PLC: điều khiển qua LAN bằng Modbus TCP (module W5500 Lite), nạp code qua USB‑C (CH340C), 16 ngõ ra transistor cách ly quang, 10 ngõ vào analog 4–20mA.
264 parts - 4 layers58.4 × 101.9 mm
Up5k osc
emeb/up5k_osc
The brute-force approach is to synthesize these analog waveforms at sufficiently high sample rates that the timing jitter becomes imperceptible.
137 parts36MIT