

DKWS PCB
Design of a Secure Data Transmission System in NB-IoT Environment
- Size
- 89 × 81 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 121
- Nets
- 144
- Pads
- 549
- Tracks, vias
- 833, 442
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 May 2025
- Updated
- 12 Jun 2025
Overview
DKWS PCB is an open-source printed circuit board by danielkluka, from the danielkluka/Diploma-Thesis repository on GitHub, published under the MIT licence. It is a 4-layer board of 89 × 81 mm with 121 parts on 144 nets, routed with 833 tracks and 442 vias.
It is built around the ESP32-S3-WROOM-1-N8, MAX3232ESE+T and SX1308, with the TPS63020DSJR, BC660K-GL and DW01A among its other parts. Its parts include 37 capacitors, 28 resistors, 11 connectors, 9 ICs and 8 diodes. It belongs with the ESP32 boards of this library.
Main components
12ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesMAX3232ESE+T
SO-Narrow-16-40℃~+85℃ 2 2 250Kbps 3V~5.5V Transceiver Yes SO-Narrow-16 RS232 ICs ROHSMaxim Integrated (Analog Devices)RS232 ICsSX1308
SOT-23-6-40℃~+85℃ 1 1.2MHz 100uA 2A 2V~24V Adjustable Boost Boost Built-in No SOT-23-6 DC-DC Converters ROHSSXDC-DC ConvertersTPS63020DSJR
VSON-14-EP(3x4)-40℃~+85℃@(TA) 1 1.2V~5.5V 1.8V~5.5V 2.4MHz 3A 50uA Adjustable Buck-Boost Buck-Boost Built-in Yes VSON-14-EP(3x4) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersBC660K-GL
SMDSMD Coaxial Connectors (RF) ROHSQuectelCoaxial Connectors (RF)DW01A
SOT-23-6L-40℃~+85℃ 1 2.5V 300mV~10V 3uA 4.3V Protection IC Support SOT-23-6L Battery Management ROHSPUOLOPBattery ManagementSMS3.3.TCT
SOT-23-6L12A 220W 3.3V 35pF 500nA 8.7V ESD Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHSSEMTECHESD And Surge Protection (TVS/ESD)TP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery ManagementTS-1088-AR02016
SMD,4x3mm-30℃~+80℃ 1.6N 100,000 cycles 12V 2mm 3.9mm 3mm 50mA Black Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,4x3mm Tactile Switches ROHSXUNPUTactile SwitchesCD54-4R7M
SMD,5.8x5.2mm2.8A 4.7uH 40mΩ Unshielded Inductor ±20% SMD,5.8x5.2mm Power Inductors ROHSzoomdo electronicsPower InductorsPDTC114EU,115-JSM
SOT-323-55℃~+150℃ 1 NPN (Pre-Biased) 1.2 13kΩ 250MHz 300mV@10mA,0.5mA 3V@10mA,0.3V 500mV@100uA,5V NPN SOT-323 Digital Transistors ROHSJSMSEMIDigital TransistorsSS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdIntroduction of Diploma Thesis, Author Daniel Kluka, MSc (Ing.)
Assignment
Objectives which should be achieved:
The aim of this thesis is to design and implement a robust data transmission system in an NB-IoT environment with the resilience against cyber threats. The work will focus on designing a hardware and software platform for the secure transmission of data using NB-IoT technology.
The thesis will include the design of a secure communication solution based on NB-IoT technology, ensuring the integrity and confidentiality of transmitted data. Emphasis will be placed on implementing security measures, for example, in the Node-RED platform, which will be used for device management and data processing. The work will also cover the design and implementation of security for the selected broker and the use of TLS for encrypting communication.
Additionally, a hardware solution will be designed to integrate selected sensors and enable data collection and transmission. The measured values, including diagnostic data about the transmission, will subsequently be stored in a suitable database, with clear visualization provided. The thesis will also include a comprehensive analysis of the security levels of individual components, describing potential vulnerabilities. The communication efficiency within the NB-IoT network will also be evaluated, including an analysis of the energy consumption during operation.
The output of the diploma thesis will be a functional device and an assessment of its resilience to security threats in the NB-IoT environment.
Characteristics of the problem of the task:
No specific knowledge or experience is required for the successful completion of the assignment; a researcher with analytical and critical thinking skills and motivation to work on this interesting and promising topic is preferred. A suitable researcher will be selected on the basis of a personal or online consultation. To select a consultation date, please contact us by e-mail: musilp@vutbr.cz
Basic sources of information:
As directed by the supervisor.
Bibliographic quotation
Printed work citation:
KLUKA, Daniel. Design of a secure data transmission system in NB-IoT environment. Master's Thesis. Petr MUSIL (supervisor). Brno: Brno University of Technology, Faculty of Electrical Engineering and Communication, 2025.
Electronic source citation:
KLUKA, Daniel. Design of a secure data transmission system in NB-IoT environment. Online, master's Thesis. Petr MUSIL (supervisor). Brno: Brno University of Technology, Faculty of Electrical Engineering and Communication, 2025. Available at: https://www.vut.cz/en/students/final-thesis/detail/167301. [accessed 2025-05-27].
$Id: Introduction.md 3 2025-06-12 17:48:00Z danielkluka $
Poslední změna: $Date: 2025-06-12$
Parts
121| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_SMD:C_0603_1608Metric | C4, C13, C18, C19, C20, C21, C27, C31, C34 |
| 7 | 0.1μF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C11, C12, C35, C36, C37 |
| 5 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R5, R10, R16 |
| 5 | MountingHole_2.5mm_Pad_Via | MountingHole:MountingHole_2.5mm_Pad_Via | H1, H2, H3, H4, H5 |
| 5 | TS-1088-AR02016 | TS-1088-AR02016:SW_TS-1088-AR02016 | BOOT1, BOOT2, PSM1, RESET1, RESET2 |
| 4 | 22μF | Capacitor_SMD:C_0805_2012Metric | C14, C15, C16, C17 |
| 4 | 33pF | Capacitor_SMD:C_0603_1608Metric | C23, C24, C25, C26 |
| 4 | KT-0603R 0603 | LED_SMD:LED_0603_1608Metric | D2, D3, D6, D7 |
| 4 | LED ON | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | JP6, JP7, JP8, JP10 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R9, R20, R24 |
| 3 | 1M | Resistor_SMD:R_0603_1608Metric | R6, R8, R11 |
| 3 | 22 | Resistor_SMD:R_0603_1608Metric | R17, R18, R19 |
| 3 | 22μF | Capacitor_SMD:C_1206_3216Metric | C7, C8, C9 |
| 3 | 4.7k | Resistor_SMD:R_0603_1608Metric | R23, R27, R28 |
| 2 | 0 | Capacitor_SMD:C_0402_1005Metric | C28, C29 |
| 2 | 10μF | Capacitor_SMD:C_1206_3216Metric | C5, C6 |
| 2 | 200 | Resistor_SMD:R_0603_1608Metric | R14, R15 |
| 2 | 470k | Resistor_SMD:R_0603_1608Metric | R12, R13 |
| 2 | CD54-4R7M | Inductor_SMD:L_Coilcraft_XAL6060-XXX | L2, L3 |
| 2 | Conn_01x22_Pin | Connector_PinHeader_2.54mm:PinHeader_1x22_P2.54mm_Vertical | J1, J2 |
| 2 | JST_GH_SM04B-GHS-TB | Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J3, J7 |
| 2 | JST_GH_SM05B-GHS-TB | Connector_JST:JST_GH_SM05B-GHS-TB_1x05-1MP_P1.25mm_Horizontal | J14, J15 |
| 2 | PDTC114EU_115 | PDTC114EU_115_for_BC660K_GL:SOT65P210X110-3N | Q2, Q3 |
| 2 | SS34 | Diode_SMD:D_SMA | D4, D5 |
| 2 | SX1308 | SX1308:SOT-23-6 | U6, U7 |
| 1 | +3.3V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP5 |
| 1 | +5V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP9 |
| 1 | 0R | Resistor_SMD:R_0402_1005Metric | R21 |
| 1 | 1.2k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 1.47k | Resistor_SMD:R_0603_1608Metric | R25 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 100pF | Capacitor_SMD:C_0603_1608Metric | C33 |
| 1 | 10μF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 180k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 1μF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 2.2k | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 2.2μH | 2r2:SLO0420H | L1 |
| 1 | 22pF | Capacitor_SMD:C_0603_1608Metric | C32 |
| 1 | 25SVPK470M | 25SVPK470M:CAP_25SVPK470M | C38 |
| 1 | 3.8k | Resistor_SMD:R_0603_1608Metric | R26 |
| 1 | 4.7μF | Capacitor_SMD:C_0603_1608Metric | C22 |
| 1 | BC660K-GL | BC660K_GL:XCVR_BC660K-GL | U2 |
| 1 | DBG | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP3 |
| 1 | DW01A | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | FS8205 | FS8205A_v2:SOT95P280X145-6N | Q5 |
| 1 | IRLZ44NSTRR | IRLZ44N:TRANS_IRF3205S | Q4 |
| 1 | JST_GH_SM03B-GHS-TB | Connector_JST:JST_GH_SM03B-GHS-TB_1x03-1MP_P1.25mm_Horizontal | J4 |
| 1 | KT-0603B 0603 | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LOGO | VUT_logo:VUT_logo | G*** |
| 1 | MAX3232ESE+T | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U8 |
| 1 | NANO SIM | Connector_Card:nanoSIM_Hinged_CUI_NSIM-2-C | J12 |
| 1 | RX | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | S2B-XH-A_LF__SN_ | S2B_XH:JST_S2B-XH-A_LF__SN_ | J6 |
| 1 | SMF5.0A | SMF5A:SODFL3718X102N | D8 |
| 1 | SMS3.3.TCT | Package_TO_SOT_SMD:SOT-23-6 | U9 |
| 1 | SS12D07VG4 | SS12D07VG4:SW_SS12D07VG4 | S1 |
| 1 | TP4056 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U3 |
| 1 | TPS63020DSJR | TPS63020DSJR:IC_TPS63020DSJR | U5 |
| 1 | TX | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | U.FL-R-SMT-1_80_ | ufl_v2:HIROSE_U.FL-R-SMT-1_80_ | J8 |
| 1 | XT60PW-M | XT60:AMASS_XT60PW-M | J10 |
Similar boards
- 4 layers95.5 × 70 mm

- 2 layers45.7 × 33 mm

- 2 layers81.8 × 46.5 mm

- 4 layers80 × 74.5 mm

GSM STM
reljamar/MQTT-GSM-receiver
A basic IoT device that connects to a mobile network and activates an output pin based on an MQTT message
108 partsMIT - 6 layers90 × 80 mm

- 2 layers40 × 30 mm

- 2 layers33 × 85 mm

GL868 ESP32V3.1
RamRamAndroid/GeoTinker-CodeMatrix
The GeoTinker GL868_ESP32 is a production-ready, open-source development board that combines an ESP32-S3 and SIM868 GSM modem, with GPS Tracking, motion detection, battery management, wireless connectivity…
79 partsGPL-3.0 - 2 layers91.5 × 78 mm

Pi Fly
PashMohandes/Pi-Fly
Significant improvement to OBAL (Open Board Autopilot Linux)
30 parts7GPL-3.0
Questions
How big is the DKWS PCB PCB?
It measures 89 × 81 mm and has 4 copper layers, 1.6 mm thick.
What parts does the DKWS PCB use?
121 parts, built around the ESP32-S3-WROOM-1-N8, MAX3232ESE+T, SX1308 and TPS63020DSJR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DKWS PCB KiCad files?
From the danielkluka/Diploma-Thesis repository on GitHub, at the commit this page was made from: the board is DKWS_PCB/DKWS_PCB.kicad_pcb and its schematic DKWS_PCB/BC660K-GL.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DKWS PCB design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).