Skip to the content
2 layers75.2 × 54.6 mmEFC Fab Version, the printed circuit board in 3D

Electric Fence Charger Circuit for Board House

Size
75.2 × 54.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
35
Nets
22
Pads
84
Tracks, vias
109, 0
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
30 Apr 2020
Updated
1 May 2020

Overview

EFC Fab Version is an open-source printed circuit board by dalton-adam, from the dalton-adam/EFC_Fab_Version repository on GitHub. It is a 2-layer board of 75.2 × 54.6 mm with 35 parts on 22 nets, routed with 109 tracks and 0 vias.

It is built around the NE556. Its parts include 14 resistors, 8 capacitors, 3 transistors, 2 diodes and 1 IC.

Main components

1

Parts

35
QtyValueFootprintReferences
7220Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_HorizontalR2, R3, R4, R5, R6, R7, R8
4.1uCapacitor_THT:C_Rect_L13.0mm_W4.0mm_P10.00mm_FKS3_FKP3_MKS4C2, C3, C4, C5
2MountingHole_PadMountingHole:MountingHole_2.2mm_M2_ISO14580_Padcap_conn1, cap_conn2
1.01Capacitor_THT:C_Axial_L3.8mm_D2.6mm_P7.50mm_HorizontalC6
1.33uCapacitor_THT:C_Rect_L18.0mm_W5.0mm_P15.00mm_FKS3_FKP3C8
110Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_HorizontalR1
1100uCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC1
1150KResistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_HorizontalR10
118KResistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_HorizontalR11
118kResistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_HorizontalR12
11N4006Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1
11N4006_2Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD2
12200KResistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_HorizontalR14
12N3904Package_TO_SOT_THT:TO-92L_Inline_WideQ3
12N3906Package_TO_SOT_THT:TO-92L_Inline_WideQ2
14.7KResistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_HorizontalR9
1470KResistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_HorizontalR13
1470uCapacitor_THT:CP_Radial_D8.0mm_P3.80mmC9
1D_SchottkyDiode_THT:D_DO-15_P12.70mm_Horizontal1N5819
1GNDMountingHole:MountingHole_2.2mm_M2_ISO14580_PadH2
1LEDMountingHole:MountingHole_2.2mm_M2_ISO14580_PadH1
1MJE13005GPackage_TO_SOT_THT:TO-220-3_VerticalQ1
1NE556Package_DIP:DIP-14_W7.62mm_Socket_LongPadsU1
1Screw_Terminal_01x05TerminalBlock_RND:TerminalBlock_RND_205-00235_1x05_P5.08mm_HorizontalJ1
1VaristorVaristor:RV_Disc_D15.5mm_W3.9mm_P7.5mm175L10

Similar boards

  • 4 layers184.2 × 169.5 mmSB mini II, the printed circuit board in 3D

    SB mini II

    simonboak/SB-mini-II

    A homebrewed Apple II clone

    97 parts76MIT
  • 2 layers100 × 77.5 mmDiskII, the printed circuit board in 3D

    DiskII

    btb/DiskII

    An Apple Disk II controller clone using standard EPROMs

    35 parts71Apache-2.0
  • 2 layers100 × 77.5 mmSmartDiskII, the printed circuit board in 3D

    SmartDiskII

    btb/SmartDiskII

    An hybrid Disk ][ and SmartPort controller

    42 parts60Apache-2.0
  • 4 layers163 × 174.4 mmGd rev3b, the printed circuit board in 3D

    Gd rev3b

    baldengineer/Mega-IIe

    Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!

    440 parts33MIT
  • 4 layers330.2 × 215.9 mmRetroii, the printed circuit board in 3D

    Retroii

    jonthomasson/retroii

    Retro ][ is a 6502 based computer based off of the Apple ][.

    302 parts33
  • 2 layers134.6 × 106.4 mmRenovation ssi 2001, the printed circuit board in 3D

    Renovation ssi 2001

    roybaer/renovation_ssi_2001

    Innovation SSI-2001 replica that can be built without vintage components

    95 parts26
  • 2 layers70.8 × 108.5 mmSequencer, the printed circuit board in 3D

    Sequencer

    sphawes/diySynth

    39 parts14
  • 2 layers88.9 × 63.5 mmAlpenglowSMTGarden, the printed circuit board in 3D

    AlpenglowSMTGarden

    AlpenglowIndustries/Alpenglow_SMTGarden_PCB

    A fun kit with lots of blinky lights and 555 timers that gives you lots of practice with different sizes of surface mount components

    155 parts11MIT

Questions

How big is the EFC Fab Version PCB?

It measures 75.2 × 54.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the EFC Fab Version use?

35 parts, built around the NE556. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the EFC Fab Version KiCad files?

From the dalton-adam/EFC_Fab_Version repository on GitHub, at the commit this page was made from: the board is EFC_Fab_version.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the EFC Fab Version design in my own project?

Its repository states no licence, so its author keeps all rights: ask dalton-adam before reusing the design.