4 layers87.1 × 67.4 mm
RFclockgen
Jjbinstock/RF-Clock-Generator
A dual channel, tunable RF clock generator PCB project
75 parts
4 layers70 × 70 mm
Hdmi breakout
dacut/hdmi-breakoutPCB design for munging HDMI EDID signals
- Size
- 70 × 70 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 77
- Nets
- 102
- Pads
- 363
- Tracks, vias
- 711, 150
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 12 Oct 2024
- Updated
- 12 Oct 2024
Overview
Hdmi breakout is an open-source printed circuit board by dacut, from the dacut/hdmi-breakout repository on GitHub. It is a 4-layer board of 70 × 70 mm with 77 parts on 102 nets, routed with 711 tracks and 150 vias.
It is built around the ESP32-C6-WROOM-1-N8, CP2102N-A02-GQFN28R and AMS1117-1.2, with the AMS1117-3.3, CDSOT23-SM712 and 1N5819HW-7-F-01 among its other parts. Its parts include 29 capacitors, 19 resistors, 10 diodes, 5 ICs and 4 connectors. It belongs with the interfaces and adapters boards and the ESP32 and RISC-V boards of this library.
Main components
10
ESP32-C6-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -99.2dBm 2.4GHz 20.5dBm 382mA 3V~3.6V 78mA ESP32-C6 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
CP2102N-A02-GQFN28R
QFN-28-EP(5x5)-40℃~+85℃@(Ta) 1.3uA 3V~3.6V 9.5mA USB 2.0 USB to UART QFN-28-EP(5x5) USB Converters ROHSSilicon LabsUSB Converters
AMS1117-1.2
SOT-223-40℃~+125℃@(Tj) 0.003%Vout 1 1.2V 1.3V@(1A) 10mA 18V 1A 60dB@(120Hz) Fixed Over Current Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
CDSOT23-SM712
SOT-23-55℃~+125℃ 13.3V 150W 15V、25V 500nA 75pF 7A 7V、12V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSGOODWORKESD And Surge Protection (TVS/ESD)
1N5819HW-7-F-01
SOD-123Schottky DiodesDiodes Incorporated
B3FS-4055P
SMD-4P,12x12mm-25℃~+70℃ 1,000,000 cycles 12mm 12mm 2.6N 24V 50mA 7.3mm Gull Wing Round Button SPST-NO Surface Mount,Vertical SMD-4P,12x12mm Tactile Switches ROHSOmronTactile Switches
HC-HDMI0019T-1
SMDHDMI ConnectorsHong Cheng
HC-TYPE-C-16P-CH3.18-3A-02
SMD-25℃~+85℃ 1 10,000 cycles 16P 20V 3A Black Female Surface Mount, Right Angle Type-C USB 3.1 SMD USB Connectors ROHSHCTLUSB Connectors
BC847BDW1T1G-TP
SOT-363SOT-363 Bipolar (BJT) ROHSTECH PUBLICBipolar (BJT)
Parts
77| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C8, C9, C12, C13, C14, C16, C18, C20, C22, C23, C26 |
| 10 | 10uF 10V X5R | Capacitor_SMD:C_0805_2012Metric | C7, C10, C11, C17, C19, C21, C24, C25, C28, C29 |
| 5 | 10k 1% | Resistor_SMD:R_0402_1005Metric | R2, R3, R4, R8, R10 |
| 4 | 310 | Resistor_SMD:R_0402_1005Metric | R15, R16, R17, R18 |
| 4 | 5.1k 1% | Resistor_SMD:R_0402_1005Metric | R11, R12, R13, R14 |
| 4 | CDSOT23-SM712 | Package_TO_SOT_SMD:SOT-23 | D2, D3, D5, D6 |
| 2 | 0.01uF | Capacitor_SMD:C_0402_1005Metric | C5, C6 |
| 2 | 1N5819HW-7-F | Diode_SMD:D_SOD-123 | D1, D4 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C15, C27 |
| 2 | B3FS-4055P | HDMI Breakout:SW_SPST_Omron_B3FS-4000 | SW1, SW2 |
| 2 | HC-HDMI0019T-1 | HDMI Breakout:HC-HDMI0019T-1 | J1, J2 |
| 2 | HC-TYPE-C-16P-CH3.18-3A-02 | Connector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J3, J4 |
| 2 | Tooling TR | HDMI Breakout:Fiducial_JLCPCB | FID2, FID3 |
| 1 | 0 | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 22.1k 1% | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 4.75k 1% | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 470 1% | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 6.98k 1% | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 80.6 1% | Resistor_SMD:R_0402_1005Metric | R19 |
| 1 | AMS1117-1.2 | Package_TO_SOT_SMD:SOT-223 | U4 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223 | U5 |
| 1 | BC847BDW1T1G | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1 |
| 1 | BL | MountingHole:MountingHole_2.2mm_M2_Pad | H3 |
| 1 | BLU LED | LED_SMD:LED_0603_1608Metric | D9 |
| 1 | BR | MountingHole:MountingHole_2.2mm_M2_Pad | H4 |
| 1 | CP2102N-A02-GQFN28R | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U3 |
| 1 | ESP32-C6-WROOM-1 | PCM_Espressif:ESP32-C6-WROOM-1 | U2 |
| 1 | GRN LED | LED_SMD:LED_0603_1608Metric | D10 |
| 1 | RED LED | LED_SMD:LED_0603_1608Metric | D8 |
| 1 | TL | MountingHole:MountingHole_2.2mm_M2_Pad | H1 |
| 1 | TMDS171IRGZT | HDMI Breakout:RGZ0048B_NV | U1 |
| 1 | TR | MountingHole:MountingHole_2.2mm_M2_Pad | H2 |
| 1 | Tooling TL | HDMI Breakout:Fiducial_JLCPCB | FID1 |
| 1 | YEL LED | LED_SMD:LED_0603_1608Metric | D7 |
Questions
How big is the Hdmi breakout PCB?
It measures 70 × 70 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Hdmi breakout use?
77 parts, built around the ESP32-C6-WROOM-1-N8, CP2102N-A02-GQFN28R, AMS1117-1.2 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hdmi breakout KiCad files?
From the dacut/hdmi-breakout repository on GitHub, at the commit this page was made from: the board is HDMI Breakout.kicad_pcb and its schematic HDMI Breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hdmi breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask dacut before reusing the design.
Similar boards
- 4 layers293 × 406 mm
- 2 layers20.8 × 26 mm
- 4 layers44.7 × 71.1 mm
- 2 layers80 × 42.5 mm
Bebl v2
wyolum/bebl_v2
"Bar End Brake Light" , redux. v2 of Justin's original BEBL with mods.
75 parts1 - 4 layers26.5 × 72 mm
01 Microcontroller Unit Board
ad4363/LuX-ray-PCBs
A repository containing KiCad schematic and pcb files for a wireless radiation detector testing interface
42 parts1 - 4 layers154.5 × 112.9 mm
LibrePLC32
AndreiVladescu/LibrePLC32
The goal of the project is to create a compact, hackable, and well-documented PLC platform for industrial automation experiments, prototyping, education, and open hardware development.
295 parts14CERN-OHL-P-2.0 - 4 layers50 × 40 mm
