

CustomEsp
Modern MP3 player with Bluetooth
- Size
- 44.7 × 71.1 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 76
- Pads
- 218
- Tracks, vias
- 555, 88
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Jun 2026
- Updated
- 15 Sep 2026
Overview
CustomEsp is an open-source printed circuit board by Antoinbrn, from the Antoinbrn/Tremenda repository on GitHub, published under the MIT licence. It is a 4-layer board of 44.7 × 71.1 mm with 42 parts on 76 nets, routed with 555 tracks and 88 vias.
It is built around the ESP32-S3-WROOM-1-N16R8, CP2102N-A02-GQFN28R and AMS1117-3.3, with the LESD5D5.0CT1G, BCV49 and TSW-120-07-S-S-LL among its other parts. Its parts include 15 resistors, 12 capacitors, 5 diodes, 3 connectors and 2 ICs. It belongs with the ESP32 boards of this library.
Main components
9ESP32-S3-WROOM-1-N16R8
SMD,25.5x18mm-103.5dBm -40℃~+65℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA ESP32-S3R8 On-board PCB Antenna UART、SPI、I2C、GPIO、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesCP2102N-A02-GQFN28R
QFN-28-EP(5x5)-40℃~+85℃@(Ta) 1.3uA 3V~3.6V 9.5mA USB 2.0 USB to UART QFN-28-EP(5x5) USB Converters ROHSSilicon LabsUSB ConvertersAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLESD5D5.0CT1G
SOD-523-55℃~+150℃ 100W 12pF 16V 1uA 5V 7A 7V Bidirectional ESD IEC 61000-4-2 SOD-523 ESD and Surge Protection (TVS/ESD) ROHSGOODWORKUncategorisedBCV49
SOT-89SOT-89 Darlington Transistors ROHSPJSEMIDarlington TransistorsTSW-120-07-S-S-LL
插件,P=2.54mmPin HeadersSamtec1N5819HW-7-F-01
SOD-123Schottky DiodesDiodes IncorporatedSML-D12U1WT86
0603-40℃~+85℃ 2.2V 20mA 54mW 620nm 63mcd Discrete Diode Frosted White Lens Orange Red Top-mount 0603 LED Indication - Discrete ROHSROHM SemiconductorLED Indication - DiscreteUSB4105-GF-A
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
README.mdTremenda
Modern MP3 player with Bluetooth
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0 | ERJU030R00V:RES_ERJU030R00V | R3, R4, R9, R12, R14 |
| 5 | 0.1µF/50V | VJ0603Y104JXAAC:CAPC1608X92N | C5, C8, C10, C11, C12 |
| 5 | 10µF/25V | C1206C106M3PACTU:CAPC3216X110N | C1, C2, C4, C7, C9 |
| 4 | 10K | ERA2APB103X:RES_ERA2APB103X | R8, R10, R11, R13 |
| 3 | 5.1K | ERJU06F5101V:RES_ERJU06F5101V | R1, R2, R15 |
| 3 | LESD5D5.0CT1G | LESD5D5.0CT1G:TVS_LESD5D5.0CT1G | D2, D3, D4 |
| 2 | 1µF/16V | C0603C105K4RACTU:CAPC1608X90N | C3, C6 |
| 2 | BCV49 | MMBT4401_R1_00001:MMBT4401_R1_00001 | Q1, Q2 |
| 2 | SW_Push | PTS645SM43SMTR92LFS:SWITCH_43SMTR92LFS | SW1, SW2 |
| 2 | TSW-120-07-S-S | TSW-120-07-S-S:SAMTEC_TSW-120-07-S-S | J2, J4 |
| 1 | 1K | ERJU06J102V:RES_ERJU06J102V | R7 |
| 1 | 1N5819HW-7-F | 1N5819HW-7-F:SOD3715X145N | D6 |
| 1 | 22.1K | ERA8AEB2212V:RES_ERA8AEB2212V | R5 |
| 1 | 47.5K | ERJPA3D4752V:RES_ERJPA3D4752V | R6 |
| 1 | AMS1117-3.3 | AMS1117-3.3:SOT229P700X180-4N | U2 |
| 1 | CP2102N-A02-GQFN28R | CP2102N-A02-GQFN28R:IC_CP2102N-A02-GQFN28R | U1 |
| 1 | ESP32-S3-WROOM-1-N16R8 | ESP32-S3-WROOM-1-N16R8:ESP32S3WROOM1N8R2 | X1 |
| 1 | SML-D12U1WT86 | SML-D12U1WT86:LED_SML-D12U1WT86 | D1 |
| 1 | USB4105-GF-A | USB4105-GF-A:GCT_USB4105-GF-A | J1 |
Similar boards
- 4 layers70 × 70 mm

- 4 layers408.7 × 50 mm

Partial Drawer Controller v1
Robast-GmbH/PCB_Designs
This repository contains all the necessary files and instructions for the PCBs that are designed using KiCad. Here is an overview of the main components: - .github: Contains Github-specific configurations, including…
619 parts1MIT - 2 layers60 × 111.3 mm

Silkscreen pcb
iandchasse/silkscreen-pcb
Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.
189 parts589CERN-OHL-S-2.0 - 2 layers170 × 170 mm

- 2 layers84.1 × 54.1 mm

- 2 layers88.4 × 25.4 mm

- 2 layers70 × 50 mm

- 4 layers40 × 40 mm

Questions
How big is the CustomEsp PCB?
It measures 44.7 × 71.1 mm and has 4 copper layers, 1.6 mm thick.
What parts does the CustomEsp use?
42 parts, built around the ESP32-S3-WROOM-1-N16R8, CP2102N-A02-GQFN28R, AMS1117-3.3 and LESD5D5.0CT1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CustomEsp KiCad files?
From the Antoinbrn/Tremenda repository on GitHub, at the commit this page was made from: the board is CustomEsp/CustomEsp.kicad_pcb and its schematic CustomEsp/CustomEsp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CustomEsp design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).